Diamond grinding bits
With consistently even coating of diamond dust. Bodies and shafts made from stainless steel. Used for grinding, engraving and chiselling steel (even chrome-cobalt alloy), glass, ceramics, porcelain and plastics. All shafts Ø 2.35mm.
Diameter: 5mm
Diamond Grinding Bits Set 1mm
Quick ViewDiamond grinding bits
With consistently even coating of diamond dust. Bodies and shafts made from stainless steel. Used for grinding, engraving and chiselling steel (even chrome-cobalt alloy), glass, ceramics, porcelain and plastics. All shafts Ø 2.35mm.
Diameter: 5mm
Ball-shaped diamond-coated grinding bits for glass and stone
For drilling and machining of glass and types of stone reaching to granite. Recommended for use on drill presses with a speed of 2,000rpm with the addition of coolant. Shaft Ø 2,35mm.
Diameter: 2.2mm
Diamond Grinding Bits Set 2,2mm
Quick ViewBall-shaped diamond-coated grinding bits for glass and stone
For drilling and machining of glass and types of stone reaching to granite. Recommended for use on drill presses with a speed of 2,000rpm with the addition of coolant. Shaft Ø 2,35mm.
Diameter: 2.2mm
Ball-shaped diamond-coated grinding bits for glass and stone
For drilling and machining of glass and types of stone reaching to granite. Recommended for use on drill presses with a speed of 2,000rpm with the addition of coolant. Shaft Ø 2,35mm.
Diameter: 3.2mm
Diamond Grinding Bits Set 3,2mm
Quick ViewBall-shaped diamond-coated grinding bits for glass and stone
For drilling and machining of glass and types of stone reaching to granite. Recommended for use on drill presses with a speed of 2,000rpm with the addition of coolant. Shaft Ø 2,35mm.
Diameter: 3.2mm
For drilling holes in (semi) precious stones, etc. Shaft Ø 2.35mm.
Set Includes: 1 x Diamond Twist Drill Bit Ø0.8mm x 5mm, 1 x Diamond Twist Drill Bit Ø1.2mm x 5mm
Diamond Twist Drills Set 0,8mm x 5mm, 1,2mm x 5mm
Quick ViewFor drilling holes in (semi) precious stones, etc. Shaft Ø 2.35mm.
Set Includes: 1 x Diamond Twist Drill Bit Ø0.8mm x 5mm, 1 x Diamond Twist Drill Bit Ø1.2mm x 5mm
-
For sharpening chisels, scissors, shears, scrapers, knives etc
- Comprises coarse, medium and fine stones.
Stone size: 152 x 50 x 4.2mm.
Diamond Whetstone Draper Set (3 Piece)
Quick ViewFor sharpening chisels, scissors, shears, scrapers, knives etc
- Comprises coarse, medium and fine stones.
Stone size: 152 x 50 x 4.2mm.
- Application: Extremely Hard Tiles, Terracotta, Hard pressed Tiles and Similar Materials
- Kind of production: Sintered, Continuous Rim Turbo Special for Fine Cutting
- Type of cutting: Wet and Dry Cut
- Type of tool: Angle Grinder
Diamont Disc Dronco Ceramics F5 Cera speed (115mm)
Quick View- Application: Extremely Hard Tiles, Terracotta, Hard pressed Tiles and Similar Materials
- Kind of production: Sintered, Continuous Rim Turbo Special for Fine Cutting
- Type of cutting: Wet and Dry Cut
- Type of tool: Angle Grinder
Die holder for round dies.
For threads M 3 – 4 – 5 – 6 – 8 and 10. With holder Ø 10mm for mounting in the tailstock drill chuck of the lathe. The holder is held by hand while cutting the threads. Neatly packed in wooden box with sliding lid.
Die holder for round dies
Quick ViewDie holder for round dies.
For threads M 3 - 4 - 5 - 6 - 8 and 10. With holder Ø 10mm for mounting in the tailstock drill chuck of the lathe. The holder is held by hand while cutting the threads. Neatly packed in wooden box with sliding lid.
Ideal kit for re – threading. Suitable for cutting threads on mild steel and aluminium.
Die Nut Set Draper (10pcs)
Quick View
Manufactured from carbon steel.
Contents: 5 x Dies: 6 x 1.00, 8 x 1.25, 10 x 1.50, 11 x 1.50, 12 x 1.75mm
Die Nut Set Draper (5pcs)
Quick View
- Popular sizes of 1″ circular split dies and die holder
- Ideal for clearing threads
- Manufactured from carbon steel with cut threads.
- Contents: 5 x Dies: 6 x 1.00, 7 x 1.00, 8 x 1.25, 10 x 1.50, 12 x 1.75mm
1 x Die holder
Die Nut Set Draper (6pcs)
Quick View- Popular sizes of 1" circular split dies and die holder
- Ideal for clearing threads
- Manufactured from carbon steel with cut threads.
- Contents: 5 x Dies: 6 x 1.00, 7 x 1.00, 8 x 1.25, 10 x 1.50, 12 x 1.75mm 1 x Die holder
- Expert Quality. Anodized finish with lockable adjustable blade
- LCD display with absolute and relative angle options.
- LCD readout reads ‘right way’ when turned through 180°.
- Accuracy 0.1°.
Digital Angle Finder Draper 250mm
Quick View- Expert Quality. Anodized finish with lockable adjustable blade
- LCD display with absolute and relative angle options.
- LCD readout reads 'right way' when turned through 180°.
- Accuracy 0.1°.
Disc sander TG 125/E
For all wood types, steel, non-ferrous metals, precious metals, plastics (also Plexiglas and glass-fibre reinforced plastics).
Disc sander TG 125/E
Quick View
Disc sander TSG 250/E
Sands long edges, end sections, radii, mitres, and, by turning the workpiece over – accurate flat surfaces at right angles. Used on soft and hard woods, non-ferrous metals, steel, plastics (perspex and PC cards), cork and rubber. A simple chart indicates the recommended speeds on different materials.
Disc sander TSG 250/E
Quick View
Door and Board Lifter Draper
Door and Board Lifter Draper
Quick View
Down Pipe Tetraflow 4m Brown
Quick View
Down Pipe Tetraflow Bend Brown
Quick View
Down Pipe Tetraflow Branch Brown
Quick View
Down Pipe Tetraflow Clip Brown
Quick View
Down Pipe Tetraflow Elbow Brown
Quick View
Down Pipe Tetraflow Shoe Brown
Quick View
Down Pipe Tetraflow Union Brown
Quick View
- Designed to clear blocked drains by an injection of water at high pressure to dislodge the blockage
- Supplied with 70mm diameter cup suitable for sinks and baths
- A 150mm diameter cup for cleaning toilets and urinals is available (Stock No.21838)
- To use – the Drain Blaster is filled with water, placed over the plughole and water blasted into drain using the plunger
- Suitable for recessed wastes only.
Drain Blaster Draper
Quick View- Designed to clear blocked drains by an injection of water at high pressure to dislodge the blockage
- Supplied with 70mm diameter cup suitable for sinks and baths
- A 150mm diameter cup for cleaning toilets and urinals is available (Stock No.21838)
- To use - the Drain Blaster is filled with water, placed over the plughole and water blasted into drain using the plunger
- Suitable for recessed wastes only.
Drain Cleaner Eltech 6mm x 1.8m
Drain Cleaner Eltech 6mm x 1.8m
Quick View
Drain Cleaner Eltech 6mm x 4.6m
Drain Cleaner Eltech 6mm x 4.6m
Quick View
Drain Cleaner Eltech 6mm x 7.6m
Drain Cleaner Eltech 6mm x 7.6m
Quick View
Drain Cleaner Eltech 6mm x 7m
Drain Cleaner Eltech 6mm x 7m
Quick View
Drain Cleaner Eltech 7mm x 7.6m
Drain Cleaner Eltech 7mm x 7.6m
Quick View
Drain Cleaner Eltech 9mm x 10m
Drain Cleaner Eltech 9mm x 10m
Quick View
Drain Cleaner Eltech 9mm x 7m
Drain Cleaner Eltech 9mm x 7m
Quick View
- Nine different tapered sizes for the removal of female drain plugs fitted in many automotive applications
- Sold loose.
Drain Plug Wrench Draper 200mm
Quick View- Nine different tapered sizes for the removal of female drain plugs fitted in many automotive applications
- Sold loose.
- Ten 330mm long reinforced screw – in polyester rods ideal for gaining access to wire and cables under floorboards, ceiling cavities, trunking and the like
- Supplied with hook end and flexible joint with ring end
- These rods are suitable for storage in an average – sized tool box
- in storage tube.
Drain Rod Kit Draper for Tool Boxes 330mm
Quick View- Ten 330mm long reinforced screw - in polyester rods ideal for gaining access to wire and cables under floorboards, ceiling cavities, trunking and the like
- Supplied with hook end and flexible joint with ring end
- These rods are suitable for storage in an average - sized tool box
- in storage tube.
- Comprising ten rods each 915mm long, double worm screw and plunger
- 9M long when fully assembled
- Manufactured from polypropylene with brass plated end connections.
Drain Rod Set Draper 9m (12 Piece)
Quick View- Comprising ten rods each 915mm long, double worm screw and plunger
- 9M long when fully assembled
- Manufactured from polypropylene with brass plated end connections.
- Comprising ten rods each 900mm long, double worm screw, plunger and jointed scraper
- 9M long when fully assembled
- Manufactured from polypropylene with crimped brass plated end connections
- Packed in plastic carrying case, with shoulder strap.
Drain Rod Set Draper in Case 9m (13pcs)
Quick View- Comprising ten rods each 900mm long, double worm screw, plunger and jointed scraper
- 9M long when fully assembled
- Manufactured from polypropylene with crimped brass plated end connections
- Packed in plastic carrying case, with shoulder strap.
Scraper for Drain Rods
Drain Scrape Rods Draper
Quick View
Drain Unblocker 7.6m
Drain Unblocker 7.6m
Quick View
Worm Screw for Drain Rods
Drain Worm Screw Draper
Quick View
Draper 20V D89521
Draper 20V D89521
Quick View
- Draper Charger 10.8V D16255
Draper Charger 10.8V D16255
Quick View- Draper Charger 10.8V D16255
- ABS construction with unique cam locking mechanism with internal rubber seal
- For use with flexible suction hoses used with Draper petrol-powered water pumps.
Draper Charger 20V D23793
Quick View- ABS construction with unique cam locking mechanism with internal rubber seal
- For use with flexible suction hoses used with Draper petrol-powered water pumps.