Drill Rasp PG Sphere
Drill Rasp PG Sphere
Quick View
Drill sharpener BSG 220
Easy sharpening of drill bits from 3 to 13mm diameter, standard angle of 118°. The sharpening operation is controlled exactly by means of the movable carriage.
Drill Sharpener BSG 220
Quick ViewEasy sharpening of drill bits from 3 to 13mm diameter, standard angle of 118°. The sharpening operation is controlled exactly by means of the movable carriage.
Drilling device BV 2000
An accurate device for parallel drilling, thread-cutting and milling. Made of high-precision aluminium die-casting. With 20mm MICROMOT collar.
Drilling device BV 2000
Quick ViewDrilling device BV 2000
An accurate device for parallel drilling, thread-cutting and milling. Made of high-precision aluminium die-casting. With 20mm MICROMOT collar.
Coarse Toothed Blades (No. 9: 14 teeth per 25mm)
Super-Cut” scroll saw blades. High quality steel for extended use and prolonged cutting capacity. Standard version without pin. Hard and soft woods, plastic, Perspex and soft non-ferrous metal.
DS 460 and DS 230/E Coarse-toothed blades (12 Pieces)
Quick ViewCoarse Toothed Blades (No. 9: 14 teeth per 25mm)
Super-Cut" scroll saw blades. High quality steel for extended use and prolonged cutting capacity. Standard version without pin. Hard and soft woods, plastic, Perspex and soft non-ferrous metal.
Fine Toothed Blades (No. 3: 41 teeth per 25mm)
Super-Cut” scroll saw blades. High quality steel for extended use and prolonged cutting capacity. Standard version without pin. Hard materials such as steel and PERTINAX.
DS 460 and DS 230/E Fine-toothed blade (12 Pieces)
Quick ViewFine Toothed Blades (No. 3: 41 teeth per 25mm)
Super-Cut" scroll saw blades. High quality steel for extended use and prolonged cutting capacity. Standard version without pin. Hard materials such as steel and PERTINAX.
Very fine-toothed blades (No. 1: 50 teeth per 25mm)
Super-Cut” scroll saw blades. High quality steel for extended use and prolonged cutting capacity. Standard version without pin. Hard and soft woods, plastic, Perspex and soft non-ferrous metal.
DS 460 and DS 230/E Fine-toothed blades (12 Pieces)
Quick ViewVery fine-toothed blades (No. 1: 50 teeth per 25mm)
Super-Cut" scroll saw blades. High quality steel for extended use and prolonged cutting capacity. Standard version without pin. Hard and soft woods, plastic, Perspex and soft non-ferrous metal.
Standard Toothed Blades (No. 5: 17 teeth per 25mm)
Super-Cut” scroll saw blades. High quality steel for extended use and prolonged cutting capacity. Standard version without pin. Hard and soft woods, plastic, Perspex and soft non-ferrous metal.
DS 460 and DS 230/E Standard-toothed blade (12 Pieces)
Quick ViewStandard Toothed Blades (No. 5: 17 teeth per 25mm)
Super-Cut" scroll saw blades. High quality steel for extended use and prolonged cutting capacity. Standard version without pin. Hard and soft woods, plastic, Perspex and soft non-ferrous metal.
Standard Toothed Blades (No. 5: 36 teeth per 25mm)
Super-Cut” scroll saw blades. High quality steel for extended use and prolonged cutting capacity. Standard version without pin. Hard materials such as steel and PERTINAX.
DS 460 and DS 230/E Standard-toothed blades (12 Pieces)
Quick ViewStandard Toothed Blades (No. 5: 36 teeth per 25mm)
Super-Cut" scroll saw blades. High quality steel for extended use and prolonged cutting capacity. Standard version without pin. Hard materials such as steel and PERTINAX.
Fine Toothed Blades (No. 3: 20 teeth per 25mm)
Super-Cut” scroll saw blades. High quality steel for extended use and prolonged cutting capacity. Standard version without pin. Hard materials such as steel and pertinax.
DS 460 and DS 230/E Very Fine-toothed blades (12 Pieces)
Quick ViewFine Toothed Blades (No. 3: 20 teeth per 25mm)
Super-Cut" scroll saw blades. High quality steel for extended use and prolonged cutting capacity. Standard version without pin. Hard materials such as steel and pertinax.
DS 460 Blade Holders
For clamping regular saw blades with high clamping force: for true alignment of the saw arm. Set of 2 pieces
DS 460 Blade Holders
Quick View
These blades cut all directions and obviate the turning of the workpiece (advantageous, especially with bigger workpieces). A 1.5mm hole is required. Ideal for plastic, hard and soft woods.
DS 460 Spiral Blade with Plain Ends (12 Pieces)
Quick View
DS 460 Standard Coarse-toothed blades with Pins (10 TPI per 25mm)
For cutting soft and hard wood, plastics as well as other soft materials and especially thicker work pieces.
DS 460 Standard Coarse-toothed blades with Pins (12 Pieces)
Quick ViewDS 460 Standard Coarse-toothed blades with Pins (10 TPI per 25mm)
For cutting soft and hard wood, plastics as well as other soft materials and especially thicker work pieces.
DS 460 Standard Fine-toothed blades with Pins (25 TPI per 25mm)
For cutting soft and hard wood, plastics as well as other soft materials and especially thicker work pieces.
DS 460 Standard Fine-toothed blades with Pins (12 Pieces)
Quick ViewDS 460 Standard Fine-toothed blades with Pins (25 TPI per 25mm)
For cutting soft and hard wood, plastics as well as other soft materials and especially thicker work pieces.
DS 460 Standard Normal-toothed blades with Pins (18 TPI per 25mm)
For cutting soft and hard wood, plastics as well as other soft materials and especially thicker work pieces.
DS 460 Standard Normal-toothed blades with Pins (12 Pieces)
Quick ViewDS 460 Standard Normal-toothed blades with Pins (18 TPI per 25mm)
For cutting soft and hard wood, plastics as well as other soft materials and especially thicker work pieces.
Edge finder set
Used for fast and accurate location of starting point of work pieces with respect to the machine spindle on milling machines. Size 6 x 6 x 50mm and 6 x 5 x 75mm. Comes in wooden box with sliding lid.
Edge finder set
Quick ViewEdge finder set
Used for fast and accurate location of starting point of work pieces with respect to the machine spindle on milling machines. Size 6 x 6 x 50mm and 6 x 5 x 75mm. Comes in wooden box with sliding lid.
- Soft grip liner : Sturdy ABS plastic mold
- Safety switch
- Bottom loading magazine
- High & low power setting
- 2.4m cable
Electric Nailer Stanley
Quick View- Soft grip liner : Sturdy ABS plastic mold
- Safety switch
- Bottom loading magazine
- High & low power setting
- 2.4m cable
Engineers Lamp ATL 5m
Engineers Lamp ATL 5m
Quick View
Double ended hardened scriber with straight and 90° hardened points.
Engineers Scriber Draper 230mm
Quick View
Engraving device GE 20
With standard 20mm collar for all MICROMOT drilling and milling units which are equipped with steel collets.
Engraving device GE 20
Quick View
Set of stencils for engraving device GE 20 and GE 70
Engraving Device GE20 and GE70 Stencil Set
Quick View
Solid carbide stylus for the engraving devices GE 20 and GE 70 for letter width 0.5mm or 1mm.
Engraving Device Stylus
Quick View
Engraving Tool GG 12
For engraving and line work and for frosting glass
Engraving tool GG 12
Quick ViewEngraving Tool GG 12
For engraving and line work and for frosting glass
Entry Fill Valve Rubber 20mm
Quick ViewEntry Fill Valve Rubber 30mm
Quick View
MICROMOT extension cord.
300 cm.
Extension Cord 300cm
Quick ViewExtension Pole Corner Peta
Quick View
- This handy tool can be used as a conventional hole punch (supplied with a qty of 4mm eyelets) on soft materials, or to join soft materials together using the special punch and die head and eyelets Supplied
- Supplied with a quantity of eyelets.
Eyelets for Hole Punch Plier Draper 4mm (500pcs)
Quick View- This handy tool can be used as a conventional hole punch (supplied with a qty of 4mm eyelets) on soft materials, or to join soft materials together using the special punch and die head and eyelets Supplied
- Supplied with a quantity of eyelets.
- With an ergonomic plastic handle featuring an anti-slip design.
- Optimized spindle for enhanced power transfer.
- Powder-coated arms for improved resistance against rust.
- Jaw Opening: 1000mm
F Clamp Beorol 120 x 1000mm
Quick View- With an ergonomic plastic handle featuring an anti-slip design.
- Optimized spindle for enhanced power transfer.
- Powder-coated arms for improved resistance against rust.
- Jaw Opening: 1000mm
- With an ergonomic plastic handle featuring an anti-slip design.
- Optimized spindle for enhanced power transfer.
- Powder-coated arms for improved resistance against rust.
- Jaw Opening: 300mm
F Clamp Beorol 120 x 300mm
Quick View- With an ergonomic plastic handle featuring an anti-slip design.
- Optimized spindle for enhanced power transfer.
- Powder-coated arms for improved resistance against rust.
- Jaw Opening: 300mm
- With an ergonomic plastic handle featuring an anti-slip design.
- Optimized spindle for enhanced power transfer.
- Powder-coated arms for improved resistance against rust.
- Jaw Opening: 500mm
F Clamp Beorol 120 x 500mm
Quick View- With an ergonomic plastic handle featuring an anti-slip design.
- Optimized spindle for enhanced power transfer.
- Powder-coated arms for improved resistance against rust.
- Jaw Opening: 500mm
- With an ergonomic plastic handle featuring an anti-slip design.
- Optimized spindle for enhanced power transfer.
- Powder-coated arms for improved resistance against rust.
- Jaw Opening: 800mm
F Clamp Beorol 120 x 800mm
Quick View- With an ergonomic plastic handle featuring an anti-slip design.
- Optimized spindle for enhanced power transfer.
- Powder-coated arms for improved resistance against rust.
- Jaw Opening: 800mm
- With an ergonomic plastic handle featuring an anti-slip design.
- Optimized spindle for enhanced power transfer.
- Powder-coated arms for improved resistance against rust.
- Jaw Opening: 100mm
F Clamp Beorol 50 x 100mm
Quick View- With an ergonomic plastic handle featuring an anti-slip design.
- Optimized spindle for enhanced power transfer.
- Powder-coated arms for improved resistance against rust.
- Jaw Opening: 100mm
- With an ergonomic plastic handle featuring an anti-slip design.
- Optimized spindle for enhanced power transfer.
- Powder-coated arms for improved resistance against rust.
- Jaw Opening: 200mm
F Clamp Beorol 50 x 200mm
Quick View- With an ergonomic plastic handle featuring an anti-slip design.
- Optimized spindle for enhanced power transfer.
- Powder-coated arms for improved resistance against rust.
- Jaw Opening: 200mm
- With an ergonomic plastic handle featuring an anti-slip design.
- Optimized spindle for enhanced power transfer.
- Powder-coated arms for improved resistance against rust.
- Jaw Opening: 200mm
F Clamp Beorol 80 x 200mm
Quick View- With an ergonomic plastic handle featuring an anti-slip design.
- Optimized spindle for enhanced power transfer.
- Powder-coated arms for improved resistance against rust.
- Jaw Opening: 200mm
- With an ergonomic plastic handle featuring an anti-slip design.
- Optimized spindle for enhanced power transfer.
- Powder-coated arms for improved resistance against rust.
- Jaw Opening: 300mm
F Clamp Beorol 80 x 300mm
Quick View- With an ergonomic plastic handle featuring an anti-slip design.
- Optimized spindle for enhanced power transfer.
- Powder-coated arms for improved resistance against rust.
- Jaw Opening: 300mm
- Piston clamp with a double threaded screw which doubles the pressure and speed, and allows work on uneven surfaces, tubes, etc.
- Cast iron jaws, epoxy painted jaws
- Extra resistant, anti-rust coated rolled steel bar
- Non-slip brake on moving jaw
- Jaw Opening: 1000mm
F Clamp Piher Heavy Duty 1000mm
Quick View- Piston clamp with a double threaded screw which doubles the pressure and speed, and allows work on uneven surfaces, tubes, etc.
- Cast iron jaws, epoxy painted jaws
- Extra resistant, anti-rust coated rolled steel bar
- Non-slip brake on moving jaw
- Jaw Opening: 1000mm
- Piston clamp with a double threaded screw which doubles the pressure and speed, and allows work on uneven surfaces, tubes, etc.
- Cast iron jaws, epoxy painted jaws
- Extra resistant, anti-rust coated rolled steel bar
- Non-slip brake on moving jaw
- Jaw Opening: 1500mm
F Clamp Piher Heavy Duty 1500mm
Quick View- Piston clamp with a double threaded screw which doubles the pressure and speed, and allows work on uneven surfaces, tubes, etc.
- Cast iron jaws, epoxy painted jaws
- Extra resistant, anti-rust coated rolled steel bar
- Non-slip brake on moving jaw
- Jaw Opening: 1500mm