- Piston clamp with a double threaded screw which doubles the pressure and speed, and allows work on uneven surfaces, tubes, etc.
- Cast iron jaws, epoxy painted jaws
- Extra resistant, anti-rust coated rolled steel bar
- Non-slip brake on moving jaw
- Jaw Opening: 200mm
F Clamp Piher Heavy Duty 200mm
Quick View- Piston clamp with a double threaded screw which doubles the pressure and speed, and allows work on uneven surfaces, tubes, etc.
- Cast iron jaws, epoxy painted jaws
- Extra resistant, anti-rust coated rolled steel bar
- Non-slip brake on moving jaw
- Jaw Opening: 200mm
- Piston clamp with a double threaded screw which doubles the pressure and speed, and allows work on uneven surfaces, tubes, etc.
- Cast iron jaws, epoxy painted jaws
- Extra resistant, anti-rust coated rolled steel bar
- Non-slip brake on moving jaw
- Jaw Opening: 300mm
F Clamp Piher Heavy Duty 300mm
Quick View- Piston clamp with a double threaded screw which doubles the pressure and speed, and allows work on uneven surfaces, tubes, etc.
- Cast iron jaws, epoxy painted jaws
- Extra resistant, anti-rust coated rolled steel bar
- Non-slip brake on moving jaw
- Jaw Opening: 300mm
- Piston clamp with a double threaded screw which doubles the pressure and speed, and allows work on uneven surfaces, tubes, etc.
- Cast iron jaws, epoxy painted jaws
- Extra resistant, anti-rust coated rolled steel bar
- Non-slip brake on moving jaw
- Jaw Opening: 400mm
F Clamp Piher Heavy Duty 400mm
Quick View- Piston clamp with a double threaded screw which doubles the pressure and speed, and allows work on uneven surfaces, tubes, etc.
- Cast iron jaws, epoxy painted jaws
- Extra resistant, anti-rust coated rolled steel bar
- Non-slip brake on moving jaw
- Jaw Opening: 400mm
- Piston clamp with a double threaded screw which doubles the pressure and speed, and allows work on uneven surfaces, tubes, etc.
- Cast iron jaws, epoxy painted jaws
- Extra resistant, anti-rust coated rolled steel bar
- Non-slip brake on moving jaw
- Jaw Opening: 500mm
F Clamp Piher Heavy Duty 500mm
Quick View- Piston clamp with a double threaded screw which doubles the pressure and speed, and allows work on uneven surfaces, tubes, etc.
- Cast iron jaws, epoxy painted jaws
- Extra resistant, anti-rust coated rolled steel bar
- Non-slip brake on moving jaw
- Jaw Opening: 500mm
- Piston clamp with a double threaded screw which doubles the pressure and speed, and allows work on uneven surfaces, tubes, etc.
- Cast iron jaws, epoxy painted jaws
- Extra resistant, anti-rust coated rolled steel bar
- Non-slip brake on moving jaw
- Jaw Opening: 600mm
F Clamp Piher Heavy Duty 600mm
Quick View- Piston clamp with a double threaded screw which doubles the pressure and speed, and allows work on uneven surfaces, tubes, etc.
- Cast iron jaws, epoxy painted jaws
- Extra resistant, anti-rust coated rolled steel bar
- Non-slip brake on moving jaw
- Jaw Opening: 600mm
- Piston clamp with a double threaded screw which doubles the pressure and speed, and allows work on uneven surfaces, tubes, etc.
- Cast iron jaws, epoxy painted jaws
- Extra resistant, anti-rust coated rolled steel bar
- Non-slip brake on moving jaw
- Jaw Opening: 800mm
F Clamp Piher Heavy Duty 800mm
Quick View- Piston clamp with a double threaded screw which doubles the pressure and speed, and allows work on uneven surfaces, tubes, etc.
- Cast iron jaws, epoxy painted jaws
- Extra resistant, anti-rust coated rolled steel bar
- Non-slip brake on moving jaw
- Jaw Opening: 800mm
- F Clamp Topex Automatic 150 x 60mm
- Jaw Opening: 150mm
F Clamp Topex Automatic 150 x 60mm
Quick View- F Clamp Topex Automatic 150 x 60mm
- Jaw Opening: 150mm
- F Clamp Topex Automatic 200 x 60mm
- Jaw Opening:200mm
F Clamp Topex Automatic 200 x 60mm
Quick View- F Clamp Topex Automatic 200 x 60mm
- Jaw Opening:200mm
- F Clamp Topex Automatic 300 x 60mm
- Jaw Opening: 300mm
F Clamp Topex Automatic 300 x 60mm
Quick View- F Clamp Topex Automatic 300 x 60mm
- Jaw Opening: 300mm
4-jaw-chuck, self-centering for FD 150/E
Used to clamp cylindrical, square or octagonal work pieces. High accuracy. Clamping range with reversible jaws from 1 – 20mm (inside) and 20 – 50mm (outside). Ø 50mm.
FD 150/E 4-jaw chuck with independent jaws
Quick View4-jaw-chuck, self-centering for FD 150/E
Used to clamp cylindrical, square or octagonal work pieces. High accuracy. Clamping range with reversible jaws from 1 - 20mm (inside) and 20 - 50mm (outside). Ø 50mm.
FD 150/E Chip collecting tray with splash guard
Of 1.5mm thick sheet steel, powder-coated. Bevelled edges at the front and back enable easy cleaning. Pre-drilled mounting holes for the secure stability of the FD 150/E. L 400 x W 165 x H 140mm. The lathe depicted here is not included in the scope of delivery.
FD 150/E Chip collecting tray with splash guard
Quick ViewFD 150/E Chip collecting tray with splash guard
Of 1.5mm thick sheet steel, powder-coated. Bevelled edges at the front and back enable easy cleaning. Pre-drilled mounting holes for the secure stability of the FD 150/E. L 400 x W 165 x H 140mm. The lathe depicted here is not included in the scope of delivery.
Multiple range standard ER 11 type collets
Offering high concentricity. May be reduced up to 0.5mm below their nominal diameter (intermediate sizes not required). D = 11.5mm, L = 18mm. One each of 2 – 2.5 – 3 – 4 – 5 – 6 and 7mm are included. With clamping nut M 16 x 1. Suitable for the main spindle of the FD 150/E. Supplied in a wooden box.
FD 150/E Collets
Quick ViewMultiple range standard ER 11 type collets
Offering high concentricity. May be reduced up to 0.5mm below their nominal diameter (intermediate sizes not required). D = 11.5mm, L = 18mm. One each of 2 - 2.5 - 3 - 4 - 5 - 6 and 7mm are included. With clamping nut M 16 x 1. Suitable for the main spindle of the FD 150/E. Supplied in a wooden box.
FD150/E Drill Chuck
Capacity 0.5 – 6.5mm. Industrial quality with high concentricity (allowed up to 10,000rpm). Complete with arbour B 10 x MK 0/short. For the tailstock of the FD 150/E.
FD 150/E Drill Chuck
Quick ViewFD150/E Drill Chuck
Capacity 0.5 - 6.5mm. Industrial quality with high concentricity (allowed up to 10,000rpm). Complete with arbour B 10 x MK 0/short. For the tailstock of the FD 150/E.
14-piece parallel supports set
Ground in pairs. For adjusting work on drilling machines, lathes and milling machines. Made of high-alloy, hardened steel (58 – 62 HRC). Parallel accuracy 0.02mm. 2 each of 8 x 10, 15, 20, 25, 30, 35 and 40mm. Length 100mm. Packed in a wooden box.
FD 150/E PD 250/E, PD 400 14-piece parallel supports set
Quick View14-piece parallel supports set
Ground in pairs. For adjusting work on drilling machines, lathes and milling machines. Made of high-alloy, hardened steel (58 - 62 HRC). Parallel accuracy 0.02mm. 2 each of 8 x 10, 15, 20, 25, 30, 35 and 40mm. Length 100mm. Packed in a wooden box.
PD 400 Radius Cutting Attachment
Is mounted on the cross slide in place of the tool holder. For producing convex and concave shapes, for turning radii or 3/4 spheres with radii of 32mm max. Height adjustable tool holder (boring tool tip adjustable from 30 through 45mm above cross slide) for use with FD 150/E, PD 250/E, PD 400 and older PROXXON lathes. Dimensions: base plate 67 x 50mm, height 55mm. Including finishing cutter 8 x 8 x 80mm. In wooden box with sliding lid.
FD 150/E PD 250/E, PD 400 Radius Cutting Attachment
Quick ViewPD 400 Radius Cutting Attachment
Is mounted on the cross slide in place of the tool holder. For producing convex and concave shapes, for turning radii or 3/4 spheres with radii of 32mm max. Height adjustable tool holder (boring tool tip adjustable from 30 through 45mm above cross slide) for use with FD 150/E, PD 250/E, PD 400 and older PROXXON lathes. Dimensions: base plate 67 x 50mm, height 55mm. Including finishing cutter 8 x 8 x 80mm. In wooden box with sliding lid.
6-piece turning tool set. Made of high-quality cobalt HSS steel. Ground.
One each boring, roughing out, parting, finishing, right and left cutter. Size 6 x 6 x 65mm. For FD 150/E, supplied in wooden box
FD 150/E Turning Set
Quick View
Tool holder for rotary tools.
For use on lathe machines. Made of steel with standard 20mm MICROMOT collar size. For precise clamping of rotary tool IBS/E or LBS/E in the tool post of the lathe. Shaft 8 x 10mm. Total length 65mm.
FD 150/E, PD 250/E and PD 400 Tool holder for Rotary Tools
Quick View
Diamond coated
Ø 85 x 0.7 x 10mm. Layer ‘D100’. Ceramics, porcelain, tiles, stone, CFK, CRP and epoxy circuit boards.
FET Saw Blades Diamond Coated
Quick ViewDiamond coated
Ø 85 x 0.7 x 10mm. Layer 'D100'. Ceramics, porcelain, tiles, stone, CFK, CRP and epoxy circuit boards.
High-alloy special steel (HSS)
Ø 80 x 1.1 x 10mm, 250 teeth. Use on non-ferrous metals, soft and hard woods, laminates, GRP, CFK and composite boards.
FET Saw Blades HSS
Quick ViewHigh-alloy special steel (HSS)
Ø 80 x 1.1 x 10mm, 250 teeth. Use on non-ferrous metals, soft and hard woods, laminates, GRP, CFK and composite boards.
Milling Cutting Set (2mm-5mm)
All cutters with 6mm shaft. Cutters of Ø 2 – 3 – 4 and 5mm. Double fluted according to DIN 327. Made of HSS-Co5. Comes in wooden box with sliding lid.
FF 230 and FF 500/BL Milling Cutting Set (2mm-5mm)
Quick ViewMilling Cutting Set (2mm-5mm)
All cutters with 6mm shaft. Cutters of Ø 2 - 3 - 4 and 5mm. Double fluted according to DIN 327. Made of HSS-Co5. Comes in wooden box with sliding lid.
Milling Cutting Set (6mm-10mm)
4 cutters Ø 6 – 7 – 8 and 10mm. Four flute design according to DIN 844. Shafts 6 and 10mm respectively. Made of HSS-Co5. Supplied in wooden box with sliding lid.
FF 230 and FF 500/BL Milling Cutting Set (6mm-10mm)
Quick ViewMilling Cutting Set (6mm-10mm)
4 cutters Ø 6 - 7 - 8 and 10mm. Four flute design according to DIN 844. Shafts 6 and 10mm respectively. Made of HSS-Co5. Supplied in wooden box with sliding lid.
Three Piece Set Centre Drill Set
Made of HSS steel. DIN 333 (type A) 60°. Complete set centre drills with sizes of 2 – 2.5 and 3.15mm.
FF 230 and FF 500/BL Three Piece Set Centre Drill Set
Quick ViewThree Piece Set Centre Drill Set
Made of HSS steel. DIN 333 (type A) 60°. Complete set centre drills with sizes of 2 - 2.5 and 3.15mm.
Five piece collet set (not depicted)
Includes 1 each of 2.4 – 3 – 3.2 – 4 and 5mm, for milling cutters. Supplied in a wooden box with sliding lid.
FF 230 and PF 230 Collet Set
Quick ViewFive piece collet set (not depicted)
Includes 1 each of 2.4 - 3 - 3.2 - 4 and 5mm, for milling cutters. Supplied in a wooden box with sliding lid.
Compound Table KT 230
As described at MICRO miller FF 230, but excluding headstock and column. With 34mm bore to mount the PF 230 mill/drill head (the end fitting of the mill head’s 35mm column is machined to 34mm).
FF 230 Compound Table KT 230
Quick View
Fine feed for MICRO miller FF 230
Easily installed in a few seconds. The feed may be used via either the height feed (vertical) or the fine feed in the tilted position. The graduated scale may be zero reset. One revolution is equivalent to 1.5mm spindle travel (1 division = 0.05mm).
FF 230 Fine Feed
Quick ViewFine feed for MICRO miller FF 230
Easily installed in a few seconds. The feed may be used via either the height feed (vertical) or the fine feed in the tilted position. The graduated scale may be zero reset. One revolution is equivalent to 1.5mm spindle travel (1 division = 0.05mm).
FF 400 Splash guard and chip collecting tray
Made of 1.5mm thick sheet steel, powder-coated. Secure stand due to drill holes for fastening to a work surface (the use of steel sleeves keeps the tray tightly sealed). L 700mm, W 420mm, H 40mm.
FF 230, FF 400, FF 500, FF 500/CNC, FF 500 – ready for CNC, FF 500/BL, FF 500/BL-CNC and FF 500/BL-CNC-ready as well as for mill/drill unit BFB 2000 and compound table KT 150.
FF 400 Splash guard and chip collecting tray
Quick ViewFF 400 Splash guard and chip collecting tray
Made of 1.5mm thick sheet steel, powder-coated. Secure stand due to drill holes for fastening to a work surface (the use of steel sleeves keeps the tray tightly sealed). L 700mm, W 420mm, H 40mm.
FF 230, FF 400, FF 500, FF 500/CNC, FF 500 - ready for CNC, FF 500/BL, FF 500/BL-CNC and FF 500/BL-CNC-ready as well as for mill/drill unit BFB 2000 and compound table KT 150.
FF 500 and FF 500/BL-CNC Universal dividing table UT 400
For accurate machining of circular work pieces. The table may be fixed horizontally or vertically. Worm drive for division through 360° allowing for almost all possible divisions below 100. Supplied with 4 index plates: 27/42, 33/40, 34/39 and 36/38. Used to manufacture sprockets, gearboxes and drives, ratchets, cams, etc. (the faceplate is not included). The taper is identical to the main spindle of the lathe. With matching nuts and screws for fixation in MICROMOT standard T-slots (12 x 6 x 5mm). Supplied in a wooden box with sliding lid.
FF 500 and FF 500/BL-CNC Universal dividing table UT 400
Quick ViewFF 500 and FF 500/BL-CNC Universal dividing table UT 400
For accurate machining of circular work pieces. The table may be fixed horizontally or vertically. Worm drive for division through 360° allowing for almost all possible divisions below 100. Supplied with 4 index plates: 27/42, 33/40, 34/39 and 36/38. Used to manufacture sprockets, gearboxes and drives, ratchets, cams, etc. (the faceplate is not included). The taper is identical to the main spindle of the lathe. With matching nuts and screws for fixation in MICROMOT standard T-slots (12 x 6 x 5mm). Supplied in a wooden box with sliding lid.
FF 500/BL and FF 400 Automatic Universal Axial Feed
For the X axis of the Miller FF 500/BL. Will also fit the predecessor compound table KT 400 and the Miller FF 400. Simple assembly: The unit is mounted to the compound table with two bolts and automatically drives the spindle of the X-axis. For manual operation the handwheel needs to be mounted on the spindle of the drive-axis. Balanced special DC motor with electronic speed control (full-wave electronics). Manual drive with freewheeling function and two speed levels: Stage 1 for common machining (20 – 75mm/min). Stage 2: for machining at higher speed or quick adjustment of the X axis (90 – 260mm/min). Freewheeling function for manual operation by handwheel.
FF 500/BL and FF 400 Automatic Universal Axial Feed
Quick ViewFF 500/BL and FF 400 Automatic Universal Axial Feed
For the X axis of the Miller FF 500/BL. Will also fit the predecessor compound table KT 400 and the Miller FF 400. Simple assembly: The unit is mounted to the compound table with two bolts and automatically drives the spindle of the X-axis. For manual operation the handwheel needs to be mounted on the spindle of the drive-axis. Balanced special DC motor with electronic speed control (full-wave electronics). Manual drive with freewheeling function and two speed levels: Stage 1 for common machining (20 - 75mm/min). Stage 2: for machining at higher speed or quick adjustment of the X axis (90 – 260mm/min). Freewheeling function for manual operation by handwheel.
FF 500/BL and FF 500/BL-CNC. MICROMOT adapter
The standard milling head is exchanged for the adapter in just a few steps. Our 20mm collar enables to fasten all appliances of the MICROMOT 60 series, the MICROMOT precision drill/grinder FBS 240/E and the MICROMOT professional drill/grinder IBS/E. Especially for applications that require high speeds for small milling cutters (e.g. milling electronic boards), but also for micro drilling. Complete with fastening screws.
The professional drill/grinder IBS/E depicted here is not included.
FF 500/BL and FF 500/BL-CNC MICROMOT adapter
Quick ViewFF 500/BL and FF 500/BL-CNC. MICROMOT adapter
The standard milling head is exchanged for the adapter in just a few steps. Our 20mm collar enables to fasten all appliances of the MICROMOT 60 series, the MICROMOT precision drill/grinder FBS 240/E and the MICROMOT professional drill/grinder IBS/E. Especially for applications that require high speeds for small milling cutters (e.g. milling electronic boards), but also for micro drilling. Complete with fastening screws.
The professional drill/grinder IBS/E depicted here is not included.
FF 500/BL Digital Position Indicator
With large multi-function display, 3 glass rulers (with one sensor each) and fastening elements.
Reasonable for repetitive machining: A second start point in addition to the zero point can be set anywhere. Most important computing functions:
– Calculation and indication of a centre position
– Basic arithmetic operations
– Positioning of drill holes on any straight lines and circular paths
– Milling of crooked planes
– Milling of radii in different planes
FF 500/BL Digital Position Indicator DA 3.1
Quick ViewFF 500/BL Digital Position Indicator
With large multi-function display, 3 glass rulers (with one sensor each) and fastening elements.Reasonable for repetitive machining: A second start point in addition to the zero point can be set anywhere. Most important computing functions: - Calculation and indication of a centre position - Basic arithmetic operations - Positioning of drill holes on any straight lines and circular paths - Milling of crooked planes - Milling of radii in different planes
FF 500/BL Fine Feed
Quick and easy to install. The clutch system enables feed via either the drill handle or the handwheel. The handwheel has 0.025 graduations and may be set to zero. 1 division = 0.05mm.
FF 500/BL Fine Feed
Quick ViewFF 500/BL Fine Feed
Quick and easy to install. The clutch system enables feed via either the drill handle or the handwheel. The handwheel has 0.025 graduations and may be set to zero. 1 division = 0.05mm.
Rasp for metal, square 200mm
File Beorol Square 200mm
Quick View
Rasp for metal, triangular 200mm
File Beorol Triangular 200mm
Quick View
- High carbon steel, hardened, and tempered.
- Soft grip handles with a hang hole for convenience.
- Improved tooth profile for enhanced performance
File Draper Flat 200mm
Quick View- High carbon steel, hardened, and tempered.
- Soft grip handles with a hang hole for convenience.
- Improved tooth profile for enhanced performance
- High carbon steel, hardened, and tempered.
- Soft grip handles with a hang hole for convenience.
- Improved tooth profile for enhanced performance
File Draper Flat 200mm
Quick View- High carbon steel, hardened, and tempered.
- Soft grip handles with a hang hole for convenience.
- Improved tooth profile for enhanced performance