Three Piece Set Centre Drill Set
Made of HSS steel. DIN 333 (type A) 60°. Complete set centre drills with sizes of 2 – 2.5 and 3.15mm.
FF 230 and FF 500/BL Three Piece Set Centre Drill Set
Quick ViewThree Piece Set Centre Drill Set
Made of HSS steel. DIN 333 (type A) 60°. Complete set centre drills with sizes of 2 - 2.5 and 3.15mm.
Five piece collet set (not depicted)
Includes 1 each of 2.4 – 3 – 3.2 – 4 and 5mm, for milling cutters. Supplied in a wooden box with sliding lid.
FF 230 and PF 230 Collet Set
Quick ViewFive piece collet set (not depicted)
Includes 1 each of 2.4 - 3 - 3.2 - 4 and 5mm, for milling cutters. Supplied in a wooden box with sliding lid.
Compound Table KT 230
As described at MICRO miller FF 230, but excluding headstock and column. With 34mm bore to mount the PF 230 mill/drill head (the end fitting of the mill head’s 35mm column is machined to 34mm).
FF 230 Compound Table KT 230
Quick View
Fine feed for MICRO miller FF 230
Easily installed in a few seconds. The feed may be used via either the height feed (vertical) or the fine feed in the tilted position. The graduated scale may be zero reset. One revolution is equivalent to 1.5mm spindle travel (1 division = 0.05mm).
FF 230 Fine Feed
Quick ViewFine feed for MICRO miller FF 230
Easily installed in a few seconds. The feed may be used via either the height feed (vertical) or the fine feed in the tilted position. The graduated scale may be zero reset. One revolution is equivalent to 1.5mm spindle travel (1 division = 0.05mm).
FF 400 Splash guard and chip collecting tray
Made of 1.5mm thick sheet steel, powder-coated. Secure stand due to drill holes for fastening to a work surface (the use of steel sleeves keeps the tray tightly sealed). L 700mm, W 420mm, H 40mm.
FF 230, FF 400, FF 500, FF 500/CNC, FF 500 – ready for CNC, FF 500/BL, FF 500/BL-CNC and FF 500/BL-CNC-ready as well as for mill/drill unit BFB 2000 and compound table KT 150.
FF 400 Splash guard and chip collecting tray
Quick ViewFF 400 Splash guard and chip collecting tray
Made of 1.5mm thick sheet steel, powder-coated. Secure stand due to drill holes for fastening to a work surface (the use of steel sleeves keeps the tray tightly sealed). L 700mm, W 420mm, H 40mm.
FF 230, FF 400, FF 500, FF 500/CNC, FF 500 - ready for CNC, FF 500/BL, FF 500/BL-CNC and FF 500/BL-CNC-ready as well as for mill/drill unit BFB 2000 and compound table KT 150.
FF 500 and FF 500/BL-CNC Universal dividing table UT 400
For accurate machining of circular work pieces. The table may be fixed horizontally or vertically. Worm drive for division through 360° allowing for almost all possible divisions below 100. Supplied with 4 index plates: 27/42, 33/40, 34/39 and 36/38. Used to manufacture sprockets, gearboxes and drives, ratchets, cams, etc. (the faceplate is not included). The taper is identical to the main spindle of the lathe. With matching nuts and screws for fixation in MICROMOT standard T-slots (12 x 6 x 5mm). Supplied in a wooden box with sliding lid.
FF 500 and FF 500/BL-CNC Universal dividing table UT 400
Quick ViewFF 500 and FF 500/BL-CNC Universal dividing table UT 400
For accurate machining of circular work pieces. The table may be fixed horizontally or vertically. Worm drive for division through 360° allowing for almost all possible divisions below 100. Supplied with 4 index plates: 27/42, 33/40, 34/39 and 36/38. Used to manufacture sprockets, gearboxes and drives, ratchets, cams, etc. (the faceplate is not included). The taper is identical to the main spindle of the lathe. With matching nuts and screws for fixation in MICROMOT standard T-slots (12 x 6 x 5mm). Supplied in a wooden box with sliding lid.
FF 500/BL and FF 400 Automatic Universal Axial Feed
For the X axis of the Miller FF 500/BL. Will also fit the predecessor compound table KT 400 and the Miller FF 400. Simple assembly: The unit is mounted to the compound table with two bolts and automatically drives the spindle of the X-axis. For manual operation the handwheel needs to be mounted on the spindle of the drive-axis. Balanced special DC motor with electronic speed control (full-wave electronics). Manual drive with freewheeling function and two speed levels: Stage 1 for common machining (20 – 75mm/min). Stage 2: for machining at higher speed or quick adjustment of the X axis (90 – 260mm/min). Freewheeling function for manual operation by handwheel.
FF 500/BL and FF 400 Automatic Universal Axial Feed
Quick ViewFF 500/BL and FF 400 Automatic Universal Axial Feed
For the X axis of the Miller FF 500/BL. Will also fit the predecessor compound table KT 400 and the Miller FF 400. Simple assembly: The unit is mounted to the compound table with two bolts and automatically drives the spindle of the X-axis. For manual operation the handwheel needs to be mounted on the spindle of the drive-axis. Balanced special DC motor with electronic speed control (full-wave electronics). Manual drive with freewheeling function and two speed levels: Stage 1 for common machining (20 - 75mm/min). Stage 2: for machining at higher speed or quick adjustment of the X axis (90 – 260mm/min). Freewheeling function for manual operation by handwheel.
FF 500/BL and FF 500/BL-CNC. MICROMOT adapter
The standard milling head is exchanged for the adapter in just a few steps. Our 20mm collar enables to fasten all appliances of the MICROMOT 60 series, the MICROMOT precision drill/grinder FBS 240/E and the MICROMOT professional drill/grinder IBS/E. Especially for applications that require high speeds for small milling cutters (e.g. milling electronic boards), but also for micro drilling. Complete with fastening screws.
The professional drill/grinder IBS/E depicted here is not included.
FF 500/BL and FF 500/BL-CNC MICROMOT adapter
Quick ViewFF 500/BL and FF 500/BL-CNC. MICROMOT adapter
The standard milling head is exchanged for the adapter in just a few steps. Our 20mm collar enables to fasten all appliances of the MICROMOT 60 series, the MICROMOT precision drill/grinder FBS 240/E and the MICROMOT professional drill/grinder IBS/E. Especially for applications that require high speeds for small milling cutters (e.g. milling electronic boards), but also for micro drilling. Complete with fastening screws.
The professional drill/grinder IBS/E depicted here is not included.
FF 500/BL Digital Position Indicator
With large multi-function display, 3 glass rulers (with one sensor each) and fastening elements.
Reasonable for repetitive machining: A second start point in addition to the zero point can be set anywhere. Most important computing functions:
– Calculation and indication of a centre position
– Basic arithmetic operations
– Positioning of drill holes on any straight lines and circular paths
– Milling of crooked planes
– Milling of radii in different planes
FF 500/BL Digital Position Indicator DA 3.1
Quick ViewFF 500/BL Digital Position Indicator
With large multi-function display, 3 glass rulers (with one sensor each) and fastening elements.Reasonable for repetitive machining: A second start point in addition to the zero point can be set anywhere. Most important computing functions: - Calculation and indication of a centre position - Basic arithmetic operations - Positioning of drill holes on any straight lines and circular paths - Milling of crooked planes - Milling of radii in different planes
FF 500/BL Fine Feed
Quick and easy to install. The clutch system enables feed via either the drill handle or the handwheel. The handwheel has 0.025 graduations and may be set to zero. 1 division = 0.05mm.
FF 500/BL Fine Feed
Quick ViewFF 500/BL Fine Feed
Quick and easy to install. The clutch system enables feed via either the drill handle or the handwheel. The handwheel has 0.025 graduations and may be set to zero. 1 division = 0.05mm.
Flapwheels of standard corundum
Elastic and adapt to the contours of the work piece being processed. For machining inaccessible spots. Shaft Ø 3.0mm.
Flapwheels of standard corundum (10mm x 20mm)
Quick ViewFlapwheels of standard corundum
Elastic and adapt to the contours of the work piece being processed. For machining inaccessible spots. Shaft Ø 3.0mm.
Flapwheels of standard corundum
Elastic and adapt to the contours of the work piece being processed. For machining inaccessible spots. Shaft Ø 3.0mm.
Flapwheels of standard corundum 10mm x 30mm
Quick ViewFlapwheels of standard corundum
Elastic and adapt to the contours of the work piece being processed. For machining inaccessible spots. Shaft Ø 3.0mm.
Flexible silicon discs
Used for surface smoothing and polishing of precious metals, non-ferrous metals, high-grade metals, glass, porcelain, wood, rubber and plastic. The bullets are very suitable for working tough-to-reach insides. Shafts of Ø 2.35mm.
Diameter: 5mm
Flexible Silicon Discs 5mm (5 Pieces)
Quick ViewFlexible silicon discs
Used for surface smoothing and polishing of precious metals, non-ferrous metals, high-grade metals, glass, porcelain, wood, rubber and plastic. The bullets are very suitable for working tough-to-reach insides. Shafts of Ø 2.35mm.
Diameter: 5mm
Flexible silicon discs
Used for surface smoothing and polishing of precious metals, non-ferrous metals, high-grade metals, glass, porcelain, wood, rubber and plastic. The bullets are very suitable for working tough-to-reach insides. Shafts of Ø 2.35mm.
Flexible Silicon Discs Set 22mm (10 Pieces)
Quick ViewFlexible silicon discs
Used for surface smoothing and polishing of precious metals, non-ferrous metals, high-grade metals, glass, porcelain, wood, rubber and plastic. The bullets are very suitable for working tough-to-reach insides. Shafts of Ø 2.35mm.
Flexible silicon discs
Used for surface smoothing and polishing of precious metals, non-ferrous metals, high-grade metals, glass, porcelain, wood, rubber and plastic. The bullets are very suitable for working tough-to-reach insides. Shafts of Ø 2.35mm.
Diameter: 22mm
Flexible Silicon Discs Set 22mm (5 Pieces)
Quick ViewFlexible silicon discs
Used for surface smoothing and polishing of precious metals, non-ferrous metals, high-grade metals, glass, porcelain, wood, rubber and plastic. The bullets are very suitable for working tough-to-reach insides. Shafts of Ø 2.35mm.
Diameter: 22mm
Footswitch FS
For all machines with a Euro plug (class 2 insulation) and maximum power absorption of 500W. Ideal for both portable and stationary machines.
Footswitch FS
Quick ViewFootswitch FS
For all machines with a Euro plug (class 2 insulation) and maximum power absorption of 500W. Ideal for both portable and stationary machines.
For engraving, grinding or frosting glass. Diamond bit 1: ball Ø 1.0mm, diamond bit 2: ball Ø 1.8mm, silicon carbide bit cone 3/2 x 5mm, and bullet 2/2.5 x 7mm. All shafts Ø 2.35mm.
Set Includes: 2 x Diamond grinding bits, 2 x Silicon carbide grinding bits.
Glass Working Set (4 Pieces)
Quick ViewFor engraving, grinding or frosting glass. Diamond bit 1: ball Ø 1.0mm, diamond bit 2: ball Ø 1.8mm, silicon carbide bit cone 3/2 x 5mm, and bullet 2/2.5 x 7mm. All shafts Ø 2.35mm.
Set Includes: 2 x Diamond grinding bits, 2 x Silicon carbide grinding bits.
The pistol cartridges are
placed in a plastic pistol and are melting. They are a universal adhesive for
all materials.
Glue gun reserve 11mmx20cm Transparent
Quick View
Offers high and low temperature bonding with one tool. Easy high/low temperature selection with the push of a button. Uses with mini high/low temperature glue in both options and mini high temperature glue in high temperature only. Heats up quickly and sticks in in 60 sec. Folding base for safe and easy storage during use.
Glue Gun Stanley
Quick ViewOffers high and low temperature bonding with one tool. Easy high/low temperature selection with the push of a button. Uses with mini high/low temperature glue in both options and mini high temperature glue in high temperature only. Heats up quickly and sticks in in 60 sec. Folding base for safe and easy storage during use.
Grinding and polishing machine SP/E
For 50mm discs and brushes. With electronic speed control from 8 to 24m/sec.
Grinding and polishing machine SP/E
Quick View
High quality corundum grinding bits
Bits and sets of fine, high quality materials of consistent hardness. Various shapes for the widest possible range of applications. For grinding and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel. Accurately dimensioned shafts of Ø 2.35 or 3mm ensure maximum concentricity.
Grinding rule: Soft materials = hard grinding bits; hard materials = soft grinding bits!
Grinding Points Set 13mm
Quick ViewHigh quality corundum grinding bits
Bits and sets of fine, high quality materials of consistent hardness. Various shapes for the widest possible range of applications. For grinding and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel. Accurately dimensioned shafts of Ø 2.35 or 3mm ensure maximum concentricity.
Grinding rule: Soft materials = hard grinding bits; hard materials = soft grinding bits!
High quality corundum grinding bits
Bits and sets of fine, high quality materials of consistent hardness. Various shapes for the widest possible range of applications. For grinding and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel. Accurately dimensioned shafts of Ø 2.35 or 3mm ensure maximum concentricity.
Grinding rule: Soft materials = hard grinding bits; hard materials = soft grinding bits!
Grinding Points Set 2,5mm
Quick ViewHigh quality corundum grinding bits
Bits and sets of fine, high quality materials of consistent hardness. Various shapes for the widest possible range of applications. For grinding and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel. Accurately dimensioned shafts of Ø 2.35 or 3mm ensure maximum concentricity.
Grinding rule: Soft materials = hard grinding bits; hard materials = soft grinding bits!
High quality corundum grinding bits
Bits and sets of fine, high quality materials of consistent hardness. Various shapes for the widest possible range of applications. For grinding and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel. Accurately dimensioned shafts of Ø 2.35 or 3mm ensure maximum concentricity.
Grinding Points Set 22mm
Quick ViewHigh quality corundum grinding bits
Bits and sets of fine, high quality materials of consistent hardness. Various shapes for the widest possible range of applications. For grinding and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel. Accurately dimensioned shafts of Ø 2.35 or 3mm ensure maximum concentricity.
Silicon carbide grinding bits
Fine particles of consistent hardness for engraving and frosting of glass, ceramics and stellites. Also for grinding tungsten carbide, chilled cast iron and other hard steel alloys. Shafts Ø 2.35mm.
Grinding Points Set 22mm (10 Pieces)
Quick ViewSilicon carbide grinding bits
Fine particles of consistent hardness for engraving and frosting of glass, ceramics and stellites. Also for grinding tungsten carbide, chilled cast iron and other hard steel alloys. Shafts Ø 2.35mm.
Silicon carbide grinding bits
Fine particles of consistent hardness for engraving and frosting of glass, ceramics and stellites. Also for grinding tungsten carbide, chilled cast iron and other hard steel alloys. Shafts Ø 2.35mm.
Grinding Points Set 2mm x 7mm
Quick ViewSilicon carbide grinding bits
Fine particles of consistent hardness for engraving and frosting of glass, ceramics and stellites. Also for grinding tungsten carbide, chilled cast iron and other hard steel alloys. Shafts Ø 2.35mm.
High quality corundum grinding bits
Bits and sets of fine, high quality materials of consistent hardness. Various shapes for the widest possible range of applications. For grinding and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel. Accurately dimensioned shafts of Ø 2.35 or 3mm ensure maximum concentricity.
Grinding rule: Soft materials = hard grinding bits; hard materials = soft grinding bits!
Grinding Points Set 5mm
Quick ViewHigh quality corundum grinding bits
Bits and sets of fine, high quality materials of consistent hardness. Various shapes for the widest possible range of applications. For grinding and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel. Accurately dimensioned shafts of Ø 2.35 or 3mm ensure maximum concentricity.
Grinding rule: Soft materials = hard grinding bits; hard materials = soft grinding bits!
High quality corundum grinding bits
Bits and sets of fine, high quality materials of consistent hardness. Various shapes for the widest possible range of applications. For grinding and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel. Accurately dimensioned shafts of Ø 2.35 or 3mm ensure maximum concentricity.
Grinding rule: Soft materials = hard grinding bits; hard materials = soft grinding bits!
Grinding Points Set 6mm
Quick ViewHigh quality corundum grinding bits
Bits and sets of fine, high quality materials of consistent hardness. Various shapes for the widest possible range of applications. For grinding and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel. Accurately dimensioned shafts of Ø 2.35 or 3mm ensure maximum concentricity.
Grinding rule: Soft materials = hard grinding bits; hard materials = soft grinding bits!
High quality corundum grinding bits
Bits and sets of fine, high quality materials of consistent hardness. Various shapes for the widest possible range of applications. For grinding and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel. Accurately dimensioned shafts of Ø 2.35 or 3mm ensure maximum concentricity.
Grinding rule: Soft materials = hard grinding bits; hard materials = soft grinding bits!
Grinding Points Set 7mm
Quick ViewHigh quality corundum grinding bits
Bits and sets of fine, high quality materials of consistent hardness. Various shapes for the widest possible range of applications. For grinding and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel. Accurately dimensioned shafts of Ø 2.35 or 3mm ensure maximum concentricity.
Grinding rule: Soft materials = hard grinding bits; hard materials = soft grinding bits!
High quality corundum grinding bits
Bits and sets of fine, high quality materials of consistent hardness. Various shapes for the widest possible range of applications. For grinding and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel. Accurately dimensioned shafts of Ø 2.35 or 3mm ensure maximum concentricity.
Grinding rule: Soft materials = hard grinding bits; hard materials = soft grinding bits!
Grinding Points Set 8mm
Quick ViewHigh quality corundum grinding bits
Bits and sets of fine, high quality materials of consistent hardness. Various shapes for the widest possible range of applications. For grinding and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel. Accurately dimensioned shafts of Ø 2.35 or 3mm ensure maximum concentricity.
Grinding rule: Soft materials = hard grinding bits; hard materials = soft grinding bits!
High quality corundum grinding bits
Bits and sets of fine, high quality materials of consistent hardness. Various shapes for the widest possible range of applications. For grinding and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel. Accurately dimensioned shafts of Ø 2.35 or 3mm ensure maximum concentricity.
Grinding rule: Soft materials = hard grinding bits; hard materials = soft grinding bits!
Grinding Points Set 9mm
Quick ViewHigh quality corundum grinding bits
Bits and sets of fine, high quality materials of consistent hardness. Various shapes for the widest possible range of applications. For grinding and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel. Accurately dimensioned shafts of Ø 2.35 or 3mm ensure maximum concentricity.
Grinding rule: Soft materials = hard grinding bits; hard materials = soft grinding bits!
Draper D56361 710W
Hammer Drill Draper D56361 710W
Quick View
Draper D56369 750W
Hammer Drill Draper D56369 750W
Quick View
Ingco ID11008 1100W
Hammer Drill Ingco ID11008 1100W
Quick View
Ingco ID6538-2 650W
Hammer Drill Ingco ID6538-2 650W
Quick ViewIngco ID8508-2 850W
Hammer Drill Ingco ID8508-2 850W
Quick View
- Strong Corded Dewalt heat Gun with 2000W Motor
- Durable heat gun designed for professional, continuous operation.
Heat Gun Dewalt D26414 2000W
Quick View- Strong Corded Dewalt heat Gun with 2000W Motor
- Durable heat gun designed for professional, continuous operation.
Ingco HG200028 2000W
Heat Gun Ingco HG200028 2000W
Quick ViewIngco HG200028 2000W
Ingco HG200028-1 2000W
Heat Gun Ingco HG200028-1 2000W
Quick ViewIngco HG200028-1 2000W