(+357) 25325087 ilikodomiki@cytanet.com.cy 30 Kolonakiou, 4103,Agios Athanasios, Limassol (+357) 25325060 65 Ilia Kannaourou, 4187, Ypsonas, Limassol

Showing 1–40 of 206 results

Sort by
Show

Brass Brushes

Ideal for working on brass, brass alloys, copper, precious metals, semiprecious stones, plastic and wood. For cleaning of electronic components and circuit boards. Shaft of Ø 2.35mm.

Diameter: 13mm

Brushes Brass Set 13mm

Quick View
0 Reviews
4,90 

Brass Brushes

Ideal for working on brass, brass alloys, copper, precious metals, semiprecious stones, plastic and wood. For cleaning of electronic components and circuit boards. Shaft of Ø 2.35mm.

Diameter: 13mm

Brass Brushes

Ideal for working on brass, brass alloys, copper, precious metals, semiprecious stones, plastic and wood. For cleaning of electronic components and circuit boards. Shaft of Ø 2.35mm.

Diameter: 8mm

Brushes Brass Set 8mm

Quick View
0 Reviews
3,21 

Brass Brushes

Ideal for working on brass, brass alloys, copper, precious metals, semiprecious stones, plastic and wood. For cleaning of electronic components and circuit boards. Shaft of Ø 2.35mm.

Diameter: 8mm

Steel brushes

High quality components for best operation. For cleaning, removing rust, sanding, frosting, roughening, rounding-off, etc. of metal, cast iron, plastic, stone and wood. Shaft of Ø 2.35mm.

Diameter: 13mm

Brushes Steel Set 13mm

Quick View
0 Reviews
4,90 

Steel brushes

High quality components for best operation. For cleaning, removing rust, sanding, frosting, roughening, rounding-off, etc. of metal, cast iron, plastic, stone and wood. Shaft of Ø 2.35mm.

Diameter: 13mm

Steel brushes

High quality components for best operation. For cleaning, removing rust, sanding, frosting, roughening, rounding-off, etc. of metal, cast iron, plastic, stone and wood. Shaft of Ø 2.35mm.

Diameter: 8mm

Brushes Steel Set 8mm

Quick View
0 Reviews
3,30 

Steel brushes

High quality components for best operation. For cleaning, removing rust, sanding, frosting, roughening, rounding-off, etc. of metal, cast iron, plastic, stone and wood. Shaft of Ø 2.35mm.

Diameter: 8mm

Replacement belts for BS/E

Corundum on tear-resistant, woven backing. Sands metal, nonferrous metals, wood and plastics efficiently. 10 x 330mm.

BS/E Replacement Belts 120 Grit (5 Pieces)

Quick View
0 Reviews
4,50 
Replacement belts for BS/E Corundum on tear-resistant, woven backing. Sands metal, nonferrous metals, wood and plastics efficiently. 10 x 330mm.

Replacement belts for BS/E

Corundum on tear-resistant, woven backing. Sands metal, nonferrous metals, wood and plastics efficiently. 10 x 330mm.

BS/E Replacement Belts 180 Grit (5 Pieces)

Quick View
0 Reviews
4,30 

Replacement belts for BS/E

Corundum on tear-resistant, woven backing. Sands metal, nonferrous metals, wood and plastics efficiently. 10 x 330mm.

Replacement belts for BS/E

Corundum on tear-resistant, woven backing. Sands metal, nonferrous metals, wood and plastics efficiently. 10 x 330mm.

BS/E Replacement Belts 60 Grit (5 Pieces)

Quick View
0 Reviews
4,50 

Replacement belts for BS/E

Corundum on tear-resistant, woven backing. Sands metal, nonferrous metals, wood and plastics efficiently. 10 x 330mm.

BS/E Replacement Belts Silicon carbide 180 Grit (5 Pieces)

Identical with the foregoing item, but with burrs made from silicon carbide for grinding and de-burring of glass and ceramics. Also suitable for grinding brass, steel and cast iron.

BS/E Replacement Belts Silicon carbide 180 Grit (5 Pieces)

Quick View
0 Reviews
5,50 

BS/E Replacement Belts Silicon carbide 180 Grit (5 Pieces)

Identical with the foregoing item, but with burrs made from silicon carbide for grinding and de-burring of glass and ceramics. Also suitable for grinding brass, steel and cast iron.

Pack of 5 pieces Grinding bands made from high-quality corundum (aluminium oxide). Mounted on a high-performance support. For the sanding of metal, non-ferrous metals, wood and plastics. Size: 40 x 260mm.

BSS/S Sanding bands 150 Grit (5 Pieces)

Quick View
0 Reviews
7,76 

Pack of 5 pieces Grinding bands made from high-quality corundum (aluminium oxide). Mounted on a high-performance support. For the sanding of metal, non-ferrous metals, wood and plastics. Size: 40 x 260mm.

Pack of 5 pieces Grinding bands made from high-quality corundum (aluminium oxide). Mounted on a high-performance support. For the sanding of metal, non-ferrous metals, wood and plastics. Size: 40 x 260mm.

BSS/S Sanding bands 240 Grit (5 Pieces)

Quick View
0 Reviews
7,76 

Pack of 5 pieces Grinding bands made from high-quality corundum (aluminium oxide). Mounted on a high-performance support. For the sanding of metal, non-ferrous metals, wood and plastics. Size: 40 x 260mm.

Pack of 5 pieces Grinding bands made from high-quality corundum (aluminium oxide). Mounted on a high-performance support. For the sanding of metal, non-ferrous metals, wood and plastics. Size: 40 x 260mm.

BSS/S Sanding bands 80 Grit (5 Pieces)

Quick View
0 Reviews
7,76 
Pack of 5 pieces Grinding bands made from high-quality corundum (aluminium oxide). Mounted on a high-performance support. For the sanding of metal, non-ferrous metals, wood and plastics. Size: 40 x 260mm.

Compact workshop vacuum cleaner CW-matic

The clever solution for a clean working environment: with direct connection for electric tools from 25 – 2,000W. The vacuum cleaner runs as long as the machine runs. Follow-up time of 5 seconds after switching off the power tool.

Compact workshop vacuum cleaner CW-matic

Quick View
0 Reviews
Compact workshop vacuum cleaner CW-matic The clever solution for a clean working environment: with direct connection for electric tools from 25 - 2,000W. The vacuum cleaner runs as long as the machine runs. Follow-up time of 5 seconds after switching off the power tool.

Tungsten carbide cutting disc

Thickness approx. 2mm. For cutting and profiling wood, CFK, GRP, rubber, silicone. Cooling holes reduce heating up. Shaft Ø 2.35.

Cut-off Wheels 20mm

Quick View
0 Reviews

Tungsten carbide cutting disc

Thickness approx. 2mm. For cutting and profiling wood, CFK, GRP, rubber, silicone. Cooling holes reduce heating up. Shaft Ø 2.35.

Cutting blades made of spring steel

0.1mm thick. For plastic, wood and non-ferrous metal. Shaft Ø 2.35mm. For freehand work, we recommend using the Protective Device.

Set Includes: 1 x Cutting Blade Ø16mm, 1 x Cutting Blade Ø19mm, 1 x Cutting Blade Ø22mm   

Cutting Blades Set ( 3 Pieces)

Quick View
0 Reviews
5,10 

Cutting blades made of spring steel

0.1mm thick. For plastic, wood and non-ferrous metal. Shaft Ø 2.35mm. For freehand work, we recommend using the Protective Device.

Set Includes: 1 x Cutting Blade Ø16mm, 1 x Cutting Blade Ø19mm, 1 x Cutting Blade Ø22mm   

Corundum cutting discs

Discs made of a special compound of diameter 22 or 38 x 0.7mm. Used to part alloys and metals, stainless steels and non-ferrous metals. Can also be used for cutting wood and plastic. Shaft of Ø 2.35.

Cutting Discs Set 22mm (50 Pieces)

Quick View
0 Reviews

Corundum cutting discs

Discs made of a special compound of diameter 22 or 38 x 0.7mm. Used to part alloys and metals, stainless steels and non-ferrous metals. Can also be used for cutting wood and plastic. Shaft of Ø 2.35.

Aluminium oxide cutting discs with reinforcement

The cutting discs are available in Ø 22 x 0.8mm and Ø 38 x 1.0mm. Nearly unbreakable, making them usable to remove stock. Will cut alloyed, standard and stainless steels, non-ferrous metals and even wood and plastic. Arbor shaft of Ø 2.35mm.

Cutting Discs Set 22mm (50 Pieces)

Quick View
0 Reviews
15,70 

Aluminium oxide cutting discs with reinforcement

The cutting discs are available in Ø 22 x 0.8mm and Ø 38 x 1.0mm. Nearly unbreakable, making them usable to remove stock. Will cut alloyed, standard and stainless steels, non-ferrous metals and even wood and plastic. Arbor shaft of Ø 2.35mm.

Aluminium oxide cutting discs with reinforcement

The cutting discs are available in Ø 22 x 0.8mm and Ø 38 x 1.0mm. Nearly unbreakable, making them usable to remove stock. Will cut alloyed, standard and stainless steels, non-ferrous metals and even wood and plastic. Arbor shaft of Ø 2.35mm.

Cutting Discs Set 22mm with Arbor (10 Pieces)

Quick View
0 Reviews
5,25 

Aluminium oxide cutting discs with reinforcement

The cutting discs are available in Ø 22 x 0.8mm and Ø 38 x 1.0mm. Nearly unbreakable, making them usable to remove stock. Will cut alloyed, standard and stainless steels, non-ferrous metals and even wood and plastic. Arbor shaft of Ø 2.35mm.

Corundum cutting discs

Discs made of a special compound of diameter 22 or 38 x 0.7mm. Used to part alloys and metals, stainless steels and non-ferrous metals. Can also be used for cutting wood and plastic. Shaft of Ø 2.35.

Cutting Discs Set 22mm with Arbor (10 Pieces)

Quick View
0 Reviews
3,50 

Corundum cutting discs

Discs made of a special compound of diameter 22 or 38 x 0.7mm. Used to part alloys and metals, stainless steels and non-ferrous metals. Can also be used for cutting wood and plastic. Shaft of Ø 2.35.

Corundum cutting discs

Discs made of a special compound of diameter 22 or 38 x 0.7mm. Used to part alloys and metals, stainless steels and non-ferrous metals. Can also be used for cutting wood and plastic. Shaft of Ø 2.35.

Cutting Discs Set 38mm (25 Pieces)

Quick View
0 Reviews

Corundum cutting discs

Discs made of a special compound of diameter 22 or 38 x 0.7mm. Used to part alloys and metals, stainless steels and non-ferrous metals. Can also be used for cutting wood and plastic. Shaft of Ø 2.35.

Corundum cutting discs

Discs made of a special compound of diameter 22 or 38 x 0.7mm. Used to part alloys and metals, stainless steels and non-ferrous metals. Can also be used for cutting wood and plastic. Shaft of Ø 2.35.

Cutting Discs Set 38mm with Arbor (5 Pieces)

Quick View
0 Reviews
3,65 

Corundum cutting discs

Discs made of a special compound of diameter 22 or 38 x 0.7mm. Used to part alloys and metals, stainless steels and non-ferrous metals. Can also be used for cutting wood and plastic. Shaft of Ø 2.35.

Aluminium oxide cutting discs with reinforcement

The cutting discs are available in Ø 22 x 0.8mm and Ø 38 x 1.0mm. Nearly unbreakable, making them usable to remove stock. Will cut alloyed, standard and stainless steels, non-ferrous metals and even wood and plastic. Arbor shaft of Ø 2.35mm.

Cutting Discs Set 38mm with Arbor (5 Pieces)

Quick View
0 Reviews
7,00 

Aluminium oxide cutting discs with reinforcement

The cutting discs are available in Ø 22 x 0.8mm and Ø 38 x 1.0mm. Nearly unbreakable, making them usable to remove stock. Will cut alloyed, standard and stainless steels, non-ferrous metals and even wood and plastic. Arbor shaft of Ø 2.35mm.

For additional filter function. Must be removed when vacuuming liquids.

Including: 5 pieces

CW-matic Fine dust paper filter

Quick View
0 Reviews
17,30 
For additional filter function. Must be removed when vacuuming liquids. Including: 5 pieces

Made of POLYPROPYLENE. Can be cleaned dry or wet.

CW-matic Fluted filter for

Quick View
0 Reviews
22,35 
Made of POLYPROPYLENE. Can be cleaned dry or wet.

Drill chuck with sliding sleeve for the tailstock of the DB 250

Clamps up to 5mm. Is inserted on the spot of the rotating back centre. The feed movement results from sliding the complete tailstock.

DB 250 Drill chuck with sliding sleeve

Quick View
0 Reviews
17,07 

Drill chuck with sliding sleeve for the tailstock of the DB 250

Clamps up to 5mm. Is inserted on the spot of the rotating back centre. The feed movement results from sliding the complete tailstock.

Five piece HSS chisel set

A high quality set with the most frequently used turning tools :beading tool, gouges 3mm and 6.4mm, parting tool and scraper. Neatly packed in a wooden box.

DB 250 Five piece HSS chisel set

Quick View
0 Reviews
Five piece HSS chisel set A high quality set with the most frequently used turning tools :beading tool, gouges 3mm and 6.4mm, parting tool and scraper. Neatly packed in a wooden box.

Independent four jaw chuck for the DB 250

With individually adjustable jaws. Used to clamp asymmetrical pieces such as rectangles. The reversible jaws clamp from 1.5 – 35mm (inside) and from 14 – 67mm (outside). The DB 250 headstock spindle of thread M16 x 1 screws directly into the chuck.

DB 250 Independent four jaw chuck

Quick View
0 Reviews
38,30 
Independent four jaw chuck for the DB 250 With individually adjustable jaws. Used to clamp asymmetrical pieces such as rectangles. The reversible jaws clamp from 1.5 - 35mm (inside) and from 14 - 67mm (outside). The DB 250 headstock spindle of thread M16 x 1 screws directly into the chuck.

Three jaw chuck for the lathe DB 250

Used for concentric clamping. Made from steel and offering 1.5 to 20mm and 12 to 50mm when reversing the jaws. The chuck has a M16 x 1 thread for fitting directly to the DB 250 headstock spindle.

DB 250 Three jaw chuck

Quick View
0 Reviews
59,76 
Three jaw chuck for the lathe DB 250 Used for concentric clamping. Made from steel and offering 1.5 to 20mm and 12 to 50mm when reversing the jaws. The chuck has a M16 x 1 thread for fitting directly to the DB 250 headstock spindle.

Diamond cutting discs

Only 0.6 thick. For cutting and sanding of porcelain, ceramics, glass fibre boards, plastic and non-ferrous metals. Shaft of Ø 2.35mm.

Diameter: 20mm

Diamond Cutting Discs 20mm

Quick View
0 Reviews
9,95 

Diamond cutting discs

Only 0.6 thick. For cutting and sanding of porcelain, ceramics, glass fibre boards, plastic and non-ferrous metals. Shaft of Ø 2.35mm.

Diameter: 20mm

Diamond-coated cutting discs with cooling holes

For cutting, grinding and deburring. Same application as described on the left. Less heating up due to cooling holes. No burn marks! Shaft Ø 2.35mm.

Diamond Cutting Discs 20mm with Cooling Holes

Quick View
0 Reviews
13,00 

Diamond-coated cutting discs with cooling holes

For cutting, grinding and deburring. Same application as described on the left. Less heating up due to cooling holes. No burn marks! Shaft Ø 2.35mm.

Diamond cutting discs

Only 0.6 thick. For cutting and sanding of porcelain, ceramics, glass fibre boards, plastic and non-ferrous metals. Shaft of Ø 2.35mm.

Diameter: 38mm

Diamond Cutting Discs 38mm

Quick View
0 Reviews
8,15 

Diamond cutting discs

Only 0.6 thick. For cutting and sanding of porcelain, ceramics, glass fibre boards, plastic and non-ferrous metals. Shaft of Ø 2.35mm.

Diameter: 38mm

Diamond-coated cutting discs with cooling holes

For cutting, grinding and deburring. Same application as described on the left. Less heating up due to cooling holes. No burn marks! Shaft Ø 2.35mm.

Diamond Cutting Discs 38mm with Cooling Holes

Quick View
0 Reviews
10,00 

Diamond-coated cutting discs with cooling holes

For cutting, grinding and deburring. Same application as described on the left. Less heating up due to cooling holes. No burn marks! Shaft Ø 2.35mm.

Diamond grinding bits

With consistently even coating of diamond dust. Bodies and shafts made from stainless steel. Used for grinding, engraving and chiselling steel (even chrome-cobalt alloy), glass, ceramics, porcelain and plastics. All shafts Ø 2.35mm.

Diameter: 1.8mm
Useful Length: 5mm

Diamond Grinding Bits (1,8mm x 5mm)

Quick View
0 Reviews
2,75 

Diamond grinding bits

With consistently even coating of diamond dust. Bodies and shafts made from stainless steel. Used for grinding, engraving and chiselling steel (even chrome-cobalt alloy), glass, ceramics, porcelain and plastics. All shafts Ø 2.35mm.

Diameter: 1.8mm
Useful Length: 5mm

Diamond grinding bits

With consistently even coating of diamond dust. Bodies and shafts made from stainless steel. Used for grinding, engraving and chiselling steel (even chrome-cobalt alloy), glass, ceramics, porcelain and plastics. All shafts Ø 2.35mm.

Diameter: 5mm

Diamond Grinding Bits 5mm

Quick View
0 Reviews
5,44 

Diamond grinding bits

With consistently even coating of diamond dust. Bodies and shafts made from stainless steel. Used for grinding, engraving and chiselling steel (even chrome-cobalt alloy), glass, ceramics, porcelain and plastics. All shafts Ø 2.35mm.

Diameter: 5mm

Ball-shaped diamond-coated grinding bits for glass and stone

For drilling and machining of glass and types of stone reaching to granite. Recommended for use on drill presses with a speed of 2,000rpm with the addition of coolant. Shaft Ø 2,35mm.

Diameter: 1.2mm

Diamond Grinding Bits Set 1,2mm

Quick View
0 Reviews

Ball-shaped diamond-coated grinding bits for glass and stone

For drilling and machining of glass and types of stone reaching to granite. Recommended for use on drill presses with a speed of 2,000rpm with the addition of coolant. Shaft Ø 2,35mm.

Diameter: 1.2mm

Diamond grinding bits

With consistently even coating of diamond dust. Bodies and shafts made from stainless steel. Used for grinding, engraving and chiselling steel (even chrome-cobalt alloy), glass, ceramics, porcelain and plastics. All shafts Ø 2.35mm.

Diameter: 1.8mm

Diamond Grinding Bits Set 1,8mm

Quick View
0 Reviews
4,35 
Diamond grinding bits

With consistently even coating of diamond dust. Bodies and shafts made from stainless steel. Used for grinding, engraving and chiselling steel (even chrome-cobalt alloy), glass, ceramics, porcelain and plastics. All shafts Ø 2.35mm.

Diameter: 1.8mm

Diamond grinding bits

With consistently even coating of diamond dust. Bodies and shafts made from stainless steel. Used for grinding, engraving and chiselling steel (even chrome-cobalt alloy), glass, ceramics, porcelain and plastics. All shafts Ø 2.35mm.

Diameter: 5mm

Diamond Grinding Bits Set 1mm

Quick View
0 Reviews
4,22 

Diamond grinding bits

With consistently even coating of diamond dust. Bodies and shafts made from stainless steel. Used for grinding, engraving and chiselling steel (even chrome-cobalt alloy), glass, ceramics, porcelain and plastics. All shafts Ø 2.35mm.

Diameter: 5mm

Ball-shaped diamond-coated grinding bits for glass and stone

For drilling and machining of glass and types of stone reaching to granite. Recommended for use on drill presses with a speed of 2,000rpm with the addition of coolant. Shaft Ø 2,35mm.

Diameter: 2.2mm

Diamond Grinding Bits Set 2,2mm

Quick View
0 Reviews
4,85 

Ball-shaped diamond-coated grinding bits for glass and stone

For drilling and machining of glass and types of stone reaching to granite. Recommended for use on drill presses with a speed of 2,000rpm with the addition of coolant. Shaft Ø 2,35mm.

Diameter: 2.2mm

Ball-shaped diamond-coated grinding bits for glass and stone

For drilling and machining of glass and types of stone reaching to granite. Recommended for use on drill presses with a speed of 2,000rpm with the addition of coolant. Shaft Ø 2,35mm.

Diameter: 3.2mm

Diamond Grinding Bits Set 3,2mm

Quick View
0 Reviews
4,50 

Ball-shaped diamond-coated grinding bits for glass and stone

For drilling and machining of glass and types of stone reaching to granite. Recommended for use on drill presses with a speed of 2,000rpm with the addition of coolant. Shaft Ø 2,35mm.

Diameter: 3.2mm

For drilling holes in (semi) precious stones, etc. Shaft Ø 2.35mm.

Set Includes: 1 x Diamond Twist Drill Bit Ø0.8mm x 5mm, 1 x Diamond Twist Drill Bit Ø1.2mm x 5mm

Diamond Twist Drills Set 0,8mm x 5mm, 1,2mm x 5mm

Quick View
0 Reviews
11,85 

For drilling holes in (semi) precious stones, etc. Shaft Ø 2.35mm.

Set Includes: 1 x Diamond Twist Drill Bit Ø0.8mm x 5mm, 1 x Diamond Twist Drill Bit Ø1.2mm x 5mm

HSS twist drill bit set with centring pin in storage case

6-piece set. Ø 1.5 – 2.0 – 2.5 – 3.0 – 3.5 – 4.0mm. For precision tapping of wood and plastics; also non-ferrous metal, steel and stainless steel sheets. Titanium coating reduces friction and increases service life. Shaft Ø 3mm, 6-piece set.

Drill Bits HSS Set (10 Pieces)

Quick View
0 Reviews

HSS twist drill bit set with centring pin in storage case

6-piece set. Ø 1.5 - 2.0 - 2.5 - 3.0 - 3.5 - 4.0mm. For precision tapping of wood and plastics; also non-ferrous metal, steel and stainless steel sheets. Titanium coating reduces friction and increases service life. Shaft Ø 3mm, 6-piece set.

Back to Top
X
Product has been added to your cart