Cutter set with tungsten inserts
Three holders (90mm long):for roughing out;
for longitudinal work;
for 90mm boring bar, holes from 12mm.
Standard tungsten inserts, 55°, plated (commercially available version). Three additional inserts securing screw and key TX 8 are included. 10 x 10mm.
PD 400 Cutter set with tungsten inserts
Quick ViewCutter set with tungsten inserts
Three holders (90mm long):for roughing out;
for longitudinal work;
for 90mm boring bar, holes from 12mm.
Standard tungsten inserts, 55°, plated (commercially available version). Three additional inserts securing screw and key TX 8 are included. 10 x 10mm.
PD 400 Faceplate and clamps
Is fitted instead of the standard chuck. Ideal for clamping larger and asymmetrically shaped work pieces. Ø 125 mm. 2 continuous T-slots. With clamping jaws.
PD 400 Faceplate and clamps
Quick ViewPD 400 Faceplate and clamps
Is fitted instead of the standard chuck. Ideal for clamping larger and asymmetrically shaped work pieces. Ø 125 mm. 2 continuous T-slots. With clamping jaws.
PD 400 Five Piece Set
One each roughing out, parting, finishing cut, left and right cutter. Comes in wooden box with sliding lid. 10 x 10 x 80mm.
PD 400 Five Piece Set
Quick ViewPD 400 Five Piece Set
One each roughing out, parting, finishing cut, left and right cutter. Comes in wooden box with sliding lid. 10 x 10 x 80mm.
PD 400 Fixed steady to support longer pieces
Used on the PD 400 when turning long, slender work pieces. Fitted directly to the bed-ways and is used when the tailstock support is inadequate. Maximum Ø 50mm.
PD 400 Fixed steady to support longer pieces
Quick ViewPD 400 Fixed steady to support longer pieces
Used on the PD 400 when turning long, slender work pieces. Fitted directly to the bed-ways and is used when the tailstock support is inadequate. Maximum Ø 50mm.
PD 400 Gear Tooth Chuck
Industrial quality, however not as accurate as the collets. With 10mm adapter which fits into the 10mm collet. Includes the chuck key.
PD 400 Gear Tooth Chuck
Quick ViewPD 400 Gear Tooth Chuck
Industrial quality, however not as accurate as the collets. With 10mm adapter which fits into the 10mm collet. Includes the chuck key.
Splash guard and chip collecting tray for lathe PD 400
Made from 1.5mm steel plate, powder coated. A welded cover protects the motor. Mounting holes and raised base to secure the lathe are pre-drilled. Seeping through of coolant is impossible. Length 800 x width 270 x height 290mm.
PD 400 Splash guard and chip collecting tray
Quick ViewSplash guard and chip collecting tray for lathe PD 400
Made from 1.5mm steel plate, powder coated. A welded cover protects the motor. Mounting holes and raised base to secure the lathe are pre-drilled. Seeping through of coolant is impossible. Length 800 x width 270 x height 290mm.
PD 400 Three piece thread cutting set
One cutter for external thread (ground to 60°, metric) one for internal thread, one general cutting. Comes in wooden box with sliding lid. 10 x 10 x 80mm.
PD 400 Three piece thread cutting set
Quick ViewPD 400 Three piece thread cutting set
One cutter for external thread (ground to 60°, metric) one for internal thread, one general cutting. Comes in wooden box with sliding lid. 10 x 10 x 80mm.
Including two holders. Provides quick tool changes with easy height adjustment. For turning tools 10 x 10mm.
PD 400 Tool Post
Quick ViewTravelling steady for PD 400
Fitted to the carriage of the lathe. Indispensable when turning long, slender work pieces. Maximum Ø 50mm.
PD 400 Traveling Steady
Quick ViewTravelling steady for PD 400
Fitted to the carriage of the lathe. Indispensable when turning long, slender work pieces. Maximum Ø 50mm.
Precision Lathe FD 150/E
2-stage belt drive and additional electronic control enables spindle speeds up to 5,000rpm. The right cutting speed for even the smallest pieces. For face turning, longitudinal turning, boring, taper turning, slicing and drilling. Complete with 3-jaw chuck and live centre. Centre distance 150mm. Swing 55mm. Height over cross slide 33mm.
Precision Lathe FD 150/E
Quick ViewPrecision Lathe FD 150/E
2-stage belt drive and additional electronic control enables spindle speeds up to 5,000rpm. The right cutting speed for even the smallest pieces. For face turning, longitudinal turning, boring, taper turning, slicing and drilling. Complete with 3-jaw chuck and live centre. Centre distance 150mm. Swing 55mm. Height over cross slide 33mm.Precision lathe PD 400
Centre distance 400mm. Swing 85mm. Height over cross slide 58mm. For machining steel, brass, aluminium and plastic. For face and straight turning, taper turning and thread cutting. With an extensive range of system accessories you can also drill, mill and slot.
Precision Lathe FD PD 400
Quick ViewPrecision lathe PD 250/E
For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening the mill/drill head PF 230.
Centre distance 250mm. Swing 70mm. Height over cross slide 43mm.
Precision Lathe PD 250/E
Quick ViewPrecision lathe PD 250/E
For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening the mill/drill head PF 230.
Centre distance 250mm. Swing 70mm. Height over cross slide 43mm.
Precision lathe PD 400/CNC
CNC control of Z-axis and X-axis. For facing and longitudinal turning, for turning balls, radii and any freely formed contours made of steel and non-ferrous metal
Precision Lathe PD 400/CNC
Quick ViewPrecision steel vice PM 60
Jaw width 60mm. Clamping capacity 42mm. Total length 100mm.
Precision steel vice PM 60
Quick ViewPrecision steel vice PM 60
Jaw width 60mm. Clamping capacity 42mm. Total length 100mm.
For the tool Holders
Tungsten Carbide Inserts (10 Pieces)
Quick ViewΜικρή και ευπαρουσίαστη: Η φρέζα υψηλής ακριβείας για τεχνικούς εργαστηρίου, οπτικούς, κοσμηματοπώλες, τεχνίτες ηλεκτρονικών/μοντελιστές. Η πιο ακριβής φρέζα εξαιριτικά ιδανική για κοπή με πολύ μικρούς κόφτες.
Διατρητικό μηχάνημα – φρέζα MICRO MF 70
Quick ViewΜικρή και ευπαρουσίαστη: Η φρέζα υψηλής ακριβείας για τεχνικούς εργαστηρίου, οπτικούς, κοσμηματοπώλες, τεχνίτες ηλεκτρονικών/μοντελιστές. Η πιο ακριβής φρέζα εξαιριτικά ιδανική για κοπή με πολύ μικρούς κόφτες.