Three jaw chuck for the lathe DB 250
Used for concentric clamping. Made from steel and offering 1.5 to 20mm and 12 to 50mm when reversing the jaws. The chuck has a M16 x 1 thread for fitting directly to the DB 250 headstock spindle.
DB 250 Three jaw chuck
Quick View
Delta sander OZI/E
Small yet efficient: For grinding surfaces in very tight spots, e.g. corners, sides and inaccessible areas. With hook and loop fastening for quick abrasive change.
Delta sander OZI/E
Quick ViewSmall yet efficient: For grinding surfaces in very tight spots, e.g. corners, sides and inaccessible areas. With hook and loop fastening for quick abrasive change. 
Diamond cutting discs
Only 0.6 thick. For cutting and sanding of porcelain, ceramics, glass fibre boards, plastic and non-ferrous metals. Shaft of Ø 2.35mm.
Diameter: 20mm
Diamond Cutting Discs 20mm
Quick ViewDiamond cutting discs
Only 0.6 thick. For cutting and sanding of porcelain, ceramics, glass fibre boards, plastic and non-ferrous metals. Shaft of Ø 2.35mm.
Diameter: 20mm
Diamond-coated cutting discs with cooling holes
For cutting, grinding and deburring. Same application as described on the left. Less heating up due to cooling holes. No burn marks! Shaft Ø 2.35mm.
Diamond Cutting Discs 20mm with Cooling Holes
Quick ViewDiamond-coated cutting discs with cooling holes
For cutting, grinding and deburring. Same application as described on the left. Less heating up due to cooling holes. No burn marks! Shaft Ø 2.35mm.
Diamond cutting discs
Only 0.6 thick. For cutting and sanding of porcelain, ceramics, glass fibre boards, plastic and non-ferrous metals. Shaft of Ø 2.35mm.
Diameter: 38mm
Diamond Cutting Discs 38mm
Quick ViewDiamond cutting discs
Only 0.6 thick. For cutting and sanding of porcelain, ceramics, glass fibre boards, plastic and non-ferrous metals. Shaft of Ø 2.35mm.
Diameter: 38mm
Diamond-coated cutting discs with cooling holes
For cutting, grinding and deburring. Same application as described on the left. Less heating up due to cooling holes. No burn marks! Shaft Ø 2.35mm.
Diamond Cutting Discs 38mm with Cooling Holes
Quick ViewDiamond-coated cutting discs with cooling holes
For cutting, grinding and deburring. Same application as described on the left. Less heating up due to cooling holes. No burn marks! Shaft Ø 2.35mm.
Diamond grinding bits
With consistently even coating of diamond dust. Bodies and shafts made from stainless steel. Used for grinding, engraving and chiselling steel (even chrome-cobalt alloy), glass, ceramics, porcelain and plastics. All shafts Ø 2.35mm.
Diameter: 1.8mm
Useful Length: 5mm
Diamond Grinding Bits (1,8mm x 5mm)
Quick ViewDiamond grinding bits
With consistently even coating of diamond dust. Bodies and shafts made from stainless steel. Used for grinding, engraving and chiselling steel (even chrome-cobalt alloy), glass, ceramics, porcelain and plastics. All shafts Ø 2.35mm.
Diameter: 1.8mm
Useful Length: 5mm
Diamond grinding bits
With consistently even coating of diamond dust. Bodies and shafts made from stainless steel. Used for grinding, engraving and chiselling steel (even chrome-cobalt alloy), glass, ceramics, porcelain and plastics. All shafts Ø 2.35mm.
Diameter: 5mm
Diamond Grinding Bits 5mm
Quick ViewDiamond grinding bits
With consistently even coating of diamond dust. Bodies and shafts made from stainless steel. Used for grinding, engraving and chiselling steel (even chrome-cobalt alloy), glass, ceramics, porcelain and plastics. All shafts Ø 2.35mm.
Diameter: 5mm
Ball-shaped diamond-coated grinding bits for glass and stone
For drilling and machining of glass and types of stone reaching to granite. Recommended for use on drill presses with a speed of 2,000rpm with the addition of coolant. Shaft Ø 2,35mm.
Diameter: 1.2mm
Diamond Grinding Bits Set 1,2mm
Quick ViewBall-shaped diamond-coated grinding bits for glass and stone
For drilling and machining of glass and types of stone reaching to granite. Recommended for use on drill presses with a speed of 2,000rpm with the addition of coolant. Shaft Ø 2,35mm.
Diameter: 1.2mm
Diamond grinding bits
With consistently even coating of diamond dust. Bodies and shafts made from stainless steel. Used for grinding, engraving and chiselling steel (even chrome-cobalt alloy), glass, ceramics, porcelain and plastics. All shafts Ø 2.35mm.
Diameter: 1.8mm
Diamond Grinding Bits Set 1,8mm
Quick ViewWith consistently even coating of diamond dust. Bodies and shafts made from stainless steel. Used for grinding, engraving and chiselling steel (even chrome-cobalt alloy), glass, ceramics, porcelain and plastics. All shafts Ø 2.35mm.
Diameter: 1.8mm
Diamond grinding bits
With consistently even coating of diamond dust. Bodies and shafts made from stainless steel. Used for grinding, engraving and chiselling steel (even chrome-cobalt alloy), glass, ceramics, porcelain and plastics. All shafts Ø 2.35mm.
Diameter: 5mm
Diamond Grinding Bits Set 1mm
Quick ViewDiamond grinding bits
With consistently even coating of diamond dust. Bodies and shafts made from stainless steel. Used for grinding, engraving and chiselling steel (even chrome-cobalt alloy), glass, ceramics, porcelain and plastics. All shafts Ø 2.35mm.
Diameter: 5mm
Ball-shaped diamond-coated grinding bits for glass and stone
For drilling and machining of glass and types of stone reaching to granite. Recommended for use on drill presses with a speed of 2,000rpm with the addition of coolant. Shaft Ø 2,35mm.
Diameter: 2.2mm
Diamond Grinding Bits Set 2,2mm
Quick ViewBall-shaped diamond-coated grinding bits for glass and stone
For drilling and machining of glass and types of stone reaching to granite. Recommended for use on drill presses with a speed of 2,000rpm with the addition of coolant. Shaft Ø 2,35mm.
Diameter: 2.2mm
Ball-shaped diamond-coated grinding bits for glass and stone
For drilling and machining of glass and types of stone reaching to granite. Recommended for use on drill presses with a speed of 2,000rpm with the addition of coolant. Shaft Ø 2,35mm.
Diameter: 3.2mm
Diamond Grinding Bits Set 3,2mm
Quick ViewBall-shaped diamond-coated grinding bits for glass and stone
For drilling and machining of glass and types of stone reaching to granite. Recommended for use on drill presses with a speed of 2,000rpm with the addition of coolant. Shaft Ø 2,35mm.
Diameter: 3.2mm
For drilling holes in (semi) precious stones, etc. Shaft Ø 2.35mm.
Set Includes: 1 x Diamond Twist Drill Bit Ø0.8mm x 5mm, 1 x Diamond Twist Drill Bit Ø1.2mm x 5mm
Diamond Twist Drills Set 0,8mm x 5mm, 1,2mm x 5mm
Quick ViewFor drilling holes in (semi) precious stones, etc. Shaft Ø 2.35mm.
Set Includes: 1 x Diamond Twist Drill Bit Ø0.8mm x 5mm, 1 x Diamond Twist Drill Bit Ø1.2mm x 5mm
Die holder for round dies.
For threads M 3 – 4 – 5 – 6 – 8 and 10. With holder Ø 10mm for mounting in the tailstock drill chuck of the lathe. The holder is held by hand while cutting the threads. Neatly packed in wooden box with sliding lid.
Die holder for round dies
Quick ViewDie holder for round dies.
For threads M 3 - 4 - 5 - 6 - 8 and 10. With holder Ø 10mm for mounting in the tailstock drill chuck of the lathe. The holder is held by hand while cutting the threads. Neatly packed in wooden box with sliding lid.
Disc sander TG 125/E
For all wood types, steel, non-ferrous metals, precious metals, plastics (also Plexiglas and glass-fibre reinforced plastics).
Disc sander TG 125/E
Quick View
Disc sander TSG 250/E
Sands long edges, end sections, radii, mitres, and, by turning the workpiece over – accurate flat surfaces at right angles. Used on soft and hard woods, non-ferrous metals, steel, plastics (perspex and PC cards), cork and rubber. A simple chart indicates the recommended speeds on different materials.
Disc sander TSG 250/E
Quick View
HSS twist drill bit set with centring pin in storage case
6-piece set. Ø 1.5 – 2.0 – 2.5 – 3.0 – 3.5 – 4.0mm. For precision tapping of wood and plastics; also non-ferrous metal, steel and stainless steel sheets. Titanium coating reduces friction and increases service life. Shaft Ø 3mm, 6-piece set.
Drill Bits HSS Set (10 Pieces)
Quick ViewHSS twist drill bit set with centring pin in storage case
6-piece set. Ø 1.5 - 2.0 - 2.5 - 3.0 - 3.5 - 4.0mm. For precision tapping of wood and plastics; also non-ferrous metal, steel and stainless steel sheets. Titanium coating reduces friction and increases service life. Shaft Ø 3mm, 6-piece set.
HSS twist drill bits in storage case
10-piece set. Similar to DIN 338. Ø 0.3 – 0.5 – 0.8 – 1 – 1.2 – 1.5 – 2 – 2.5 – 3 – 3.2mm. For drilling non-ferrous metal, steel and stainless steel. In labelled cassette with fold back and stand function. For clamping we recommend our 3-jaw drill chuck.
Drill Bits HSS Set (6 Pieces)
Quick ViewHSS twist drill bits in storage case
10-piece set. Similar to DIN 338. Ø 0.3 - 0.5 - 0.8 - 1 - 1.2 - 1.5 - 2 - 2.5 - 3 - 3.2mm. For drilling non-ferrous metal, steel and stainless steel. In labelled cassette with fold back and stand function. For clamping we recommend our 3-jaw drill chuck.
Selected steel quality. Purpose-made stable construction with high concentricity. Shaft and bit are manufactured from a one-piece blank. High hardness for optimum life expectancy and elasticity. For drilling metal, non-ferrous metals, plastic, PC cards and wood. Work speeds: soft materials approx. 8,000rpm, hard materials approx. 3,000rpm. Ø shanks 2.35mm.
Diameter: 0.5mm
Useful Length: 6mm
Drill Bits HSS Set 0,5mm x 6mm
Quick ViewSelected steel quality. Purpose-made stable construction with high concentricity. Shaft and bit are manufactured from a one-piece blank. High hardness for optimum life expectancy and elasticity. For drilling metal, non-ferrous metals, plastic, PC cards and wood. Work speeds: soft materials approx. 8,000rpm, hard materials approx. 3,000rpm. Ø shanks 2.35mm.
Diameter: 0.5mm
Useful Length: 6mm
Selected steel quality. Purpose-made stable construction with high concentricity. Shaft and bit are manufactured from a one-piece blank. High hardness for optimum life expectancy and elasticity. For drilling metal, non-ferrous metals, plastic, PC cards and wood. Work speeds: soft materials approx. 8,000rpm, hard materials approx. 3,000rpm. Ø shanks 2.35mm.
Diameter: 0.8mm
Useful Length: 6mm
Drill Bits HSS Set 0,8mm x 6mm
Quick ViewSelected steel quality. Purpose-made stable construction with high concentricity. Shaft and bit are manufactured from a one-piece blank. High hardness for optimum life expectancy and elasticity. For drilling metal, non-ferrous metals, plastic, PC cards and wood. Work speeds: soft materials approx. 8,000rpm, hard materials approx. 3,000rpm. Ø shanks 2.35mm.
Diameter: 0.8mm
Useful Length: 6mm
Selected steel quality. Purpose-made stable construction with high concentricity. Shaft and bit are manufactured from a one-piece blank. High hardness for optimum life expectancy and elasticity. For drilling metal, non-ferrous metals, plastic, PC cards and wood. Work speeds: soft materials approx. 8,000rpm, hard materials approx. 3,000rpm. Ø shanks 2.35mm.
Diameter: 1.2mm
Useful Length: 8mm
Drill Bits HSS Set 1,2mm x 8mm
Quick ViewSelected steel quality. Purpose-made stable construction with high concentricity. Shaft and bit are manufactured from a one-piece blank. High hardness for optimum life expectancy and elasticity. For drilling metal, non-ferrous metals, plastic, PC cards and wood. Work speeds: soft materials approx. 8,000rpm, hard materials approx. 3,000rpm. Ø shanks 2.35mm.
Diameter: 1.2mm
Useful Length: 8mm
Selected steel quality. Purpose-made stable construction with high concentricity. Shaft and bit are manufactured from a one-piece blank. High hardness for optimum life expectancy and elasticity. For drilling metal, non-ferrous metals, plastic, PC cards and wood. Work speeds: soft materials approx. 8,000rpm, hard materials approx. 3,000rpm. Ø shanks 2.35mm.
Diameter: 1.6mm
Useful Length: 8mm
Drill Bits HSS Set 1,6mm x 8mm
Quick ViewSelected steel quality. Purpose-made stable construction with high concentricity. Shaft and bit are manufactured from a one-piece blank. High hardness for optimum life expectancy and elasticity. For drilling metal, non-ferrous metals, plastic, PC cards and wood. Work speeds: soft materials approx. 8,000rpm, hard materials approx. 3,000rpm. Ø shanks 2.35mm.
Diameter: 1.6mm
Useful Length: 8mm
Selected steel quality. Purpose-made stable construction with high concentricity. Shaft and bit are manufactured from a one-piece blank. High hardness for optimum life expectancy and elasticity. For drilling metal, non-ferrous metals, plastic, PC cards and wood. Work speeds: soft materials approx. 8,000rpm, hard materials approx. 3,000rpm. Ø shanks 2.35mm.
Diameter: 1mm
Useful Length: 8mm
Drill Bits HSS Set 1mm x 8mm
Quick View
Tungsten carbide drill bits
Made of wear-resistant tungsten carbide. For drilling glass, semiprecious stones, porcelain, ceramics, marble and other hard stones. The hard stones are subdivided according to the degree of hardness from 1 – 10. Tungsten carbide can be used up to hardness degree 6. Drilling hard stones with a hardness degree of more than 6 calls for the use of diamond tools. Shaft Ø 3.0mm. With ideal cutting angle of 6°.
Diameter: 1.5mm
Length: 8mm
Drill Bits Tungsten Carbide Set 1,5mm x 8mm
Quick ViewMade of wear-resistant tungsten carbide. For drilling glass, semiprecious stones, porcelain, ceramics, marble and other hard stones. The hard stones are subdivided according to the degree of hardness from 1 - 10. Tungsten carbide can be used up to hardness degree 6. Drilling hard stones with a hardness degree of more than 6 calls for the use of diamond tools. Shaft Ø 3.0mm. With ideal cutting angle of 6°.
Diameter: 1.5mm Length: 8mm
Tungsten carbide drill bits
Made of wear-resistant tungsten carbide. For drilling glass, semiprecious stones, porcelain, ceramics, marble and other hard stones. The hard stones are subdivided according to the degree of hardness from 1 – 10. Tungsten carbide can be used up to hardness degree 6. Drilling hard stones with a hardness degree of more than 6 calls for the use of diamond tools. Shaft Ø 3.0mm. With ideal cutting angle of 6°.
Diameter: 1mm
Length: 8mm
Drill Bits Tungsten Carbide Set 1mm x 8mm
Quick ViewTungsten carbide drill bits
Made of wear-resistant tungsten carbide. For drilling glass, semiprecious stones, porcelain, ceramics, marble and other hard stones. The hard stones are subdivided according to the degree of hardness from 1 - 10. Tungsten carbide can be used up to hardness degree 6. Drilling hard stones with a hardness degree of more than 6 calls for the use of diamond tools. Shaft Ø 3.0mm. With ideal cutting angle of 6°.
Diameter: 1mm
Length: 8mm
Tungsten carbide drill bits
Made of wear-resistant tungsten carbide. For drilling glass, semiprecious stones, porcelain, ceramics, marble and other hard stones. The hard stones are subdivided according to the degree of hardness from 1 – 10. Tungsten carbide can be used up to hardness degree 6. Drilling hard stones with a hardness degree of more than 6 calls for the use of diamond tools. Shaft Ø 3.0mm. With ideal cutting angle of 6°.
Diameter: 2mm
Length: 8mm
Drill Bits Tungsten Carbide Set 2mm x 8mm
Quick ViewTungsten carbide drill bits
Made of wear-resistant tungsten carbide. For drilling glass, semiprecious stones, porcelain, ceramics, marble and other hard stones. The hard stones are subdivided according to the degree of hardness from 1 - 10. Tungsten carbide can be used up to hardness degree 6. Drilling hard stones with a hardness degree of more than 6 calls for the use of diamond tools. Shaft Ø 3.0mm. With ideal cutting angle of 6°.
Diameter: 2mm
Length: 8mm
Drill sharpener BSG 220
Easy sharpening of drill bits from 3 to 13mm diameter, standard angle of 118°. The sharpening operation is controlled exactly by means of the movable carriage.
Drill Sharpener BSG 220
Quick ViewEasy sharpening of drill bits from 3 to 13mm diameter, standard angle of 118°. The sharpening operation is controlled exactly by means of the movable carriage.
Drilling device BV 2000
An accurate device for parallel drilling, thread-cutting and milling. Made of high-precision aluminium die-casting. With 20mm MICROMOT collar.
Drilling device BV 2000
Quick ViewDrilling device BV 2000
An accurate device for parallel drilling, thread-cutting and milling. Made of high-precision aluminium die-casting. With 20mm MICROMOT collar.
Coarse Toothed Blades (No. 9: 14 teeth per 25mm)
Super-Cut” scroll saw blades. High quality steel for extended use and prolonged cutting capacity. Standard version without pin. Hard and soft woods, plastic, Perspex and soft non-ferrous metal.
DS 460 and DS 230/E Coarse-toothed blades (12 Pieces)
Quick ViewCoarse Toothed Blades (No. 9: 14 teeth per 25mm)
Super-Cut" scroll saw blades. High quality steel for extended use and prolonged cutting capacity. Standard version without pin. Hard and soft woods, plastic, Perspex and soft non-ferrous metal.
Fine Toothed Blades (No. 3: 41 teeth per 25mm)
Super-Cut” scroll saw blades. High quality steel for extended use and prolonged cutting capacity. Standard version without pin. Hard materials such as steel and PERTINAX.
DS 460 and DS 230/E Fine-toothed blade (12 Pieces)
Quick ViewFine Toothed Blades (No. 3: 41 teeth per 25mm)
Super-Cut" scroll saw blades. High quality steel for extended use and prolonged cutting capacity. Standard version without pin. Hard materials such as steel and PERTINAX.
Very fine-toothed blades (No. 1: 50 teeth per 25mm)
Super-Cut” scroll saw blades. High quality steel for extended use and prolonged cutting capacity. Standard version without pin. Hard and soft woods, plastic, Perspex and soft non-ferrous metal.
DS 460 and DS 230/E Fine-toothed blades (12 Pieces)
Quick ViewVery fine-toothed blades (No. 1: 50 teeth per 25mm)
Super-Cut" scroll saw blades. High quality steel for extended use and prolonged cutting capacity. Standard version without pin. Hard and soft woods, plastic, Perspex and soft non-ferrous metal.
Standard Toothed Blades (No. 5: 17 teeth per 25mm)
Super-Cut” scroll saw blades. High quality steel for extended use and prolonged cutting capacity. Standard version without pin. Hard and soft woods, plastic, Perspex and soft non-ferrous metal.
DS 460 and DS 230/E Standard-toothed blade (12 Pieces)
Quick ViewStandard Toothed Blades (No. 5: 17 teeth per 25mm)
Super-Cut" scroll saw blades. High quality steel for extended use and prolonged cutting capacity. Standard version without pin. Hard and soft woods, plastic, Perspex and soft non-ferrous metal.
Standard Toothed Blades (No. 5: 36 teeth per 25mm)
Super-Cut” scroll saw blades. High quality steel for extended use and prolonged cutting capacity. Standard version without pin. Hard materials such as steel and PERTINAX.
DS 460 and DS 230/E Standard-toothed blades (12 Pieces)
Quick ViewStandard Toothed Blades (No. 5: 36 teeth per 25mm)
Super-Cut" scroll saw blades. High quality steel for extended use and prolonged cutting capacity. Standard version without pin. Hard materials such as steel and PERTINAX.
Fine Toothed Blades (No. 3: 20 teeth per 25mm)
Super-Cut” scroll saw blades. High quality steel for extended use and prolonged cutting capacity. Standard version without pin. Hard materials such as steel and pertinax.
DS 460 and DS 230/E Very Fine-toothed blades (12 Pieces)
Quick ViewFine Toothed Blades (No. 3: 20 teeth per 25mm)
Super-Cut" scroll saw blades. High quality steel for extended use and prolonged cutting capacity. Standard version without pin. Hard materials such as steel and pertinax.
DS 460 Blade Holders
For clamping regular saw blades with high clamping force: for true alignment of the saw arm. Set of 2 pieces
DS 460 Blade Holders
Quick View
These blades cut all directions and obviate the turning of the workpiece (advantageous, especially with bigger workpieces). A 1.5mm hole is required. Ideal for plastic, hard and soft woods.
DS 460 Spiral Blade with Plain Ends (12 Pieces)
Quick View
DS 460 Standard Coarse-toothed blades with Pins (10 TPI per 25mm)
For cutting soft and hard wood, plastics as well as other soft materials and especially thicker work pieces.
DS 460 Standard Coarse-toothed blades with Pins (12 Pieces)
Quick ViewDS 460 Standard Coarse-toothed blades with Pins (10 TPI per 25mm)
For cutting soft and hard wood, plastics as well as other soft materials and especially thicker work pieces.
DS 460 Standard Fine-toothed blades with Pins (25 TPI per 25mm)
For cutting soft and hard wood, plastics as well as other soft materials and especially thicker work pieces.
DS 460 Standard Fine-toothed blades with Pins (12 Pieces)
Quick ViewDS 460 Standard Fine-toothed blades with Pins (25 TPI per 25mm)
For cutting soft and hard wood, plastics as well as other soft materials and especially thicker work pieces.
DS 460 Standard Normal-toothed blades with Pins (18 TPI per 25mm)
For cutting soft and hard wood, plastics as well as other soft materials and especially thicker work pieces.
DS 460 Standard Normal-toothed blades with Pins (12 Pieces)
Quick ViewDS 460 Standard Normal-toothed blades with Pins (18 TPI per 25mm)
For cutting soft and hard wood, plastics as well as other soft materials and especially thicker work pieces.