MBS 240/E Band Bimetal Saw Blades
Carrier belt of alloyed tempering steel, sawing teeth of wear-resistant high-speed steel. Varying teeth 10 – 14 TPI. Ideal for cutting all standard steel qualities, non-ferrous metals and stainless steel.
MBS 240/E Standard Saw Blades - Fine Toothed
Quick ViewMBS 240/E Band Bimetal Saw Blades
Carrier belt of alloyed tempering steel, sawing teeth of wear-resistant high-speed steel. Varying teeth 10 - 14 TPI. Ideal for cutting all standard steel qualities, non-ferrous metals and stainless steel.
For machining circular work pieces, manufacturing off-set holes and milled out portions, milling key surfaces, four-sided, sixsided materials, etc.
Absolute accurate division due to nonius at the base body. With reversed chuck jaws: Capacity inside 1.5 to 32mm, outside 12 to 65mm. Bore of 11mm (for processing longer spindles in a vertical position).
With fastening bores for horizontal and vertical mounting and suitable slot nuts and fastening screws for mounting to the MICRO miller MF 70 and the MICRO compound table KT 70.
Size: 72 x 64 x 38mm. In wooden box with sliding lid.
MF 70 and KT 70 Dividing head
Quick ViewFor machining circular work pieces, manufacturing off-set holes and milled out portions, milling key surfaces, four-sided, sixsided materials, etc.
Absolute accurate division due to nonius at the base body. With reversed chuck jaws: Capacity inside 1.5 to 32mm, outside 12 to 65mm. Bore of 11mm (for processing longer spindles in a vertical position).
With fastening bores for horizontal and vertical mounting and suitable slot nuts and fastening screws for mounting to the MICRO miller MF 70 and the MICRO compound table KT 70.
Size: 72 x 64 x 38mm. In wooden box with sliding lid.
With two flute cutters and fishtail profile (cutting to the centre). Enables lowering into non-bored work pieces. For grey-cast iron, hardened cast iron, steel, cast steel, brass, aluminium, glass, plastic and carbon fibre. One piece each 1 – 2 and 3mm. Shaft diameter 3mm.
MF 70 Tungsten milling cutters
Quick ViewWith two flute cutters and fishtail profile (cutting to the centre). Enables lowering into non-bored work pieces. For grey-cast iron, hardened cast iron, steel, cast steel, brass, aluminium, glass, plastic and carbon fibre. One piece each 1 - 2 and 3mm. Shaft diameter 3mm.
Of solid aluminium (surface-compacted). With two step motors for the axes X (transverse) and Y (lengthwise). Table size and travel distances, see description of MF 70/CNC-ready above.
MF 70/CNC-Ready Micro Compound Table
Quick View
MICRO bandsaw MBS 240/E
Solid, ribbed die-cast aluminium housing (no tubular or sheet metal construction).
MICRO Bandsaw MBS 240/E
Quick View
MICRO compound table KT 70
Made of solid aluminium with surface treatment and fitted with adjustable dovetail gibs and three T-slots of the MICROMOT standard (12 x 6 x 5mm).
MICRO Compound table KT 70
Quick ViewMICRO compound table KT 70
Made of solid aluminium with surface treatment and fitted with adjustable dovetail gibs and three T-slots of the MICROMOT standard (12 x 6 x 5mm).
MICRO cutter MIC
For cutting wood, plastics, glass fibre reinforced plastic, paper, cardboard, foils and similar materials. With 0.5mm cutting width.
MICRO cutter MIC
Quick View
MICRO Heat gun MH 550
For shrinking sleeves (many devices available on the market are simply too large) and many more kinds of other applications. Small, robust and powerful. Complete with 3 additional nozzles.
MICRO Heat gun MH 550
Quick View
MICRO miller FF 230
The headstock swivels through 360°, indicated on a scale.
MICRO miller FF 230
Quick View
MICRO shaper MP 400
For chamfering, cutting grooves, slots, recesses, radii and other profiles. For crafting picture frames and for separating. Also enables exact manufacturing of edges and longitudinal cuts (for model building, e.g. for doors, flaps and housing parts).
MICRO Shaper MP 400
Quick View
MICRO woodturning lathe DB 250
Turning in miniature is a pleasing hobby. One can make glasses, cups, saucers, vases and columns for a doll house. In model trains, one can make lighting masts, windows, tanks. Limbs for marionettes and hundreds of classical miniature turning tasks may be carried out with ease.
MICRO woodturning lathe DB 250
Quick View
MICROFLAM gas soldering set MGS
For working with open flame or with catalyst unit in combination with adapters. For soldering, hot-cutting, woodburning and shrinking of sleeves.
MICROFLAM gas soldering set MGS
Quick ViewMICROFLAM gas soldering set MGS
For working with open flame or with catalyst unit in combination with adapters. For soldering, hot-cutting, woodburning and shrinking of sleeves.
MICROFLAME burner MFB/E
Used for soldering, de-soldering, brazing, heating of work pieces, tinning. Also for use in cooking and pastry making.
MICROFLAME burner MFB/E
Quick ViewMICROFLAME burner MFB/E
Used for soldering, de-soldering, brazing, heating of work pieces, tinning. Also for use in cooking and pastry making.
MICROMOT 230/E
For drilling, milling, grinding, polishing, brushing, cutting, and engraving. The extremely slim housing (of glass-fibre reinforced POLYAMIDE) with a soft component grip area enables the unit to be handled with two fingers (pen grip).
MICROMOT 230/E
Quick View
MICROMOT 60/E with mains adapter and 34bits
Complete set with MICROMOT drill/grinder 50/E, mains adapter and 34 bits and cutters of dental quality. The best set for electronic hobbyists, model-builders, mechanics, jewelers, opticians, artists, chiropodists, dental technicians, tool and casting makers, etc.
MICROMOT 60/E with mains adapter and 34bits
Quick View
MICROMOT drill stand MB 200
Head with dovetail guides can be tilted through 90° (scale ring available). Enables bevelled drilling and versatile milling operations.
MICROMOT drill stand MB 200
Quick ViewMICROMOT drill/grinder 60/E
With a diameter of only 35mm and its low weight (230g) it offers convenient handling second to none in its class. The balanced motor effortlessly drives the ground ball bearing spindle allowing for a quiet run with a pleasant sound.
MICROMOT drill/grinder 60/E
Quick ViewMICROMOT drill/grinder 60/E
With a diameter of only 35mm and its low weight (230g) it offers convenient handling second to none in its class. The balanced motor effortlessly drives the ground ball bearing spindle allowing for a quiet run with a pleasant sound.
MICROMOT Flexishaft 110/BF
With 0.3 to 3.2mm quick-action chuck. Dual ball-bearinged milled steel shaft with tool holder for MICROMOT steel collets.
MICROMOT Flexishaft 110/BF
Quick ViewMICROMOT Flexishaft 110/BF
With 0.3 to 3.2mm quick-action chuck. Dual ball-bearinged milled steel shaft with tool holder for MICROMOT steel collets.
MICROMOT Flexishaft 110/P
Dual ball-bearinged milled steel shaft with tool holder for MICROMOT steel collets. Ball-bearinged shaft end on machine.
MICROMOT Flexishaft 110/P
Quick ViewMICROMOT Flexishaft 110/P
Dual ball-bearinged milled steel shaft with tool holder for MICROMOT steel collets. Ball-bearinged shaft end on machine.
MICROMOT glue gun HKP 220
Quick and reliable gluing of metal, wood, plastic (including Plexiglass), glass, ceramics, stoneware, cardboard, leather, polystyrene foams and textiles.
MICROMOT glue gun HKP 220
Quick View
MICROMOT mains adapter NG 5/E
With superior capacity of 5A. In compact NORYL casing (heat resistant – recommended for transformers).
MICROMOT mains adapter NG 5/E
Quick ViewMICROMOT mains adapter NG 5/E
With superior capacity of 5A. In compact NORYL casing (heat resistant - recommended for transformers).
MICROMOT mains adapter NG 2/E
NORYL casing (heat resistant – a necessity for transformer enclosures).
Characteristics:
- Polarised socket for MICROMOT plug.
- Red LED indicates readiness for use.
- PTC (Positive temperature coefficient) element prevents overload (and plugged in tool will not automatically restart). After cooling down the mains plug should be disconnected briefly to reset the adapter.
- With holes for storing bits.
- Foldable tool rest provides a secure place for keeping the MICROMOT tools at the ready.
- Variable speed control with feedback effect for adjusting bit speed to suit the job, as well as providing high torque at low speeds.
MICROMOT mains adapter NG/2 E
Quick View- Polarised socket for MICROMOT plug.
- Red LED indicates readiness for use.
- PTC (Positive temperature coefficient) element prevents overload (and plugged in tool will not automatically restart). After cooling down the mains plug should be disconnected briefly to reset the adapter.
- With holes for storing bits.
- Foldable tool rest provides a secure place for keeping the MICROMOT tools at the ready.
- Variable speed control with feedback effect for adjusting bit speed to suit the job, as well as providing high torque at low speeds.
MICROMOT tool holder
For stationary use of MICROMOT electrical precision tools with metal head in combination with a vise.
Especially suited for industrial drill/grinder IBS/E, belt sander BS/E, longneck angle grinder LHW, angle polisher WP/E, super jig saw STS/E and delta sander OZI/E. Made of glass-fibre reinforced POLYAMIDE.
MICROMOT tool holder
Quick ViewMICROMOT tool holder
For stationary use of MICROMOT electrical precision tools with metal head in combination with a vise.
Especially suited for industrial drill/grinder IBS/E, belt sander BS/E, longneck angle grinder LHW, angle polisher WP/E, super jig saw STS/E and delta sander OZI/E. Made of glass-fibre reinforced POLYAMIDE.
Mill and drill head PF 230
Includes column (35 x 400mm), mounting bracket and fastening screws (the PD 230/E and PD 250/E already have a plane-milled surface). The lathe’s top slide is replaced with the table (supplied) of 110 x 70mm, with 3 T-slots 12 x 6 x 5mm. The lathe now functions as a compound table, with X-Y travel being longitudinally and cross-wise respectively. The mill/drill head is identical to the MICRO miller FF 230.
Included: 3 Collets 6, 8 , 10mm
Mill and drill head PF 230
Quick View
Mill/ Drill MICROMOT 60/EF
The 60/EF with quick-action chuck. Practical for use with different shaft diameters. Slim, easily handled and light. Ideal for working steel, precious metals, glass, ceramics, plastics and precious stones.
Mill/ Drill MICROMOT 60/EF
Quick View
Mill/drill system BFW 40/E
Mill/drill system BFW 40/E, with controller for speeds of 900 – 6,000rpm.
Characteristics:
- The triple ball bearing armature provides direct drive (no gearing).
- Die-cast aluminium head with spindle neck of 43mm (European standard).
- Large, easy to use switch with emergency function. Chart indicates optimum speeds for milling and drilling of various materials.
- The motor operates at 40V, supplied from the power pack/ controller. At this level, the control characteristics are ideal and yield high torque, even at lower speeds. (The compound table, drill stand and step clamps are not included.)
Mill/drill system BFW 40/E
Quick ViewMill/drill system BFW 40/E
Mill/drill system BFW 40/E, with controller for speeds of 900 - 6,000rpm.
Characteristics:
- The triple ball bearing armature provides direct drive (no gearing).
- Die-cast aluminium head with spindle neck of 43mm (European standard).
- Large, easy to use switch with emergency function. Chart indicates optimum speeds for milling and drilling of various materials.
- The motor operates at 40V, supplied from the power pack/ controller. At this level, the control characteristics are ideal and yield high torque, even at lower speeds. (The compound table, drill stand and step clamps are not included.)
Mill/drill unit BFB 2000
For standard drills with 43mm spindle neck.
Characteristics:
- Head tilts through 90°, thus offering a multitude of capabilities: Diagonal drilling, versatile milling without need of special milling bits, milling of diagonal slots.
- Fine feed selectable allowing fine head feed for milling. With dial and depth scale.
- Geared rack and pinion feed for effortless drilling.
- 45mm diameter drill column, 500mm long. Approx. 140mm throat (column outside to tool centre). 65mm stroke.
- Plane-milled, solid base plate approx. 200 x 200mm with two continuous MICROMOT standard T-slots (12 x 6 x 5mm).
- Easy clamping of all common drills with standard 43mm spindle collar.
- Weight approx. 6.5kg.
Mill/drill unit BFB 2000
Quick ViewMill/drill unit BFB 2000
For standard drills with 43mm spindle neck.
Characteristics:
- Head tilts through 90°, thus offering a multitude of capabilities: Diagonal drilling, versatile milling without need of special milling bits, milling of diagonal slots.
- Fine feed selectable allowing fine head feed for milling. With dial and depth scale.
- Geared rack and pinion feed for effortless drilling.
- 45mm diameter drill column, 500mm long. Approx. 140mm throat (column outside to tool centre). 65mm stroke.
- Plane-milled, solid base plate approx. 200 x 200mm with two continuous MICROMOT standard T-slots (12 x 6 x 5mm).
- Easy clamping of all common drills with standard 43mm spindle collar.
- Weight approx. 6.5kg.
Miller FF 500/BL
With variable speed pre-selection from 200 – 4,000rpm and high precision (accuracy 0.05mm). With digital speed indication.
Characteristics:
- The sophisticated control via rotor position and speed sensors guarantees high torque for use of large milling cutters in the lower speed range.
- Solid column with dovetail guides. Milling head can be rotated to the left and right by 90° (with graduation).
- The clampable spindle sleeve is prepared for mounting of the fine feed adapter.
- Tool holder using multiple range collets type ER 20: One each of 6 – 8 – 10 and 12mm are included.
- Height adjustment of milling head via hand wheel.
- Solid plane-milled steel compound table with 3 continuous MICROMOT standard T-slots (12 x 6 x 5mm).
- All 3 hand wheels with graduated scale ring (1 rev. = 2mm).
Miller FF 500/BL
Quick ViewMiller FF 500/BL
With variable speed pre-selection from 200 - 4,000rpm and high precision (accuracy 0.05mm). With digital speed indication.
Characteristics:
- The sophisticated control via rotor position and speed sensors guarantees high torque for use of large milling cutters in the lower speed range.
- Solid column with dovetail guides. Milling head can be rotated to the left and right by 90° (with graduation).
- The clampable spindle sleeve is prepared for mounting of the fine feed adapter.
- Tool holder using multiple range collets type ER 20: One each of 6 - 8 - 10 and 12mm are included.
- Height adjustment of milling head via hand wheel.
- Solid plane-milled steel compound table with 3 continuous MICROMOT standard T-slots (12 x 6 x 5mm).
- All 3 hand wheels with graduated scale ring (1 rev. = 2mm).
Miller FF 500/BL CNC-Ready
With recirculating ball spindles and powerful step motors at all 3 axes.
Interesting for users who already own a control unit or would like to purchase one from another provider on the market.
Three standard plugs (SUB-D 9POLE) are available to connect the control unit. The mechanical construction of the miller is identical to the miller FF 500/BL-CNC.
Miller FF 500/BL CNC-Ready
Quick ViewMiller FF 500/BL CNC-Ready
With recirculating ball spindles and powerful step motors at all 3 axes.
Interesting for users who already own a control unit or would like to purchase one from another provider on the market.
Three standard plugs (SUB-D 9POLE) are available to connect the control unit. The mechanical construction of the miller is identical to the miller FF 500/BL-CNC.
Miller FF 500/BL-CNC
Characteristics:
- With brushless direct drive: Quiet and vibration-free with high precision (accuracy 0.05mm).
- Variable speed pre-selection from 200 – 4,000rpm with digit speed display.
- With double roller bearing recirculating ball spindles at all 3 axes and 3 powerful step motors for driving compound table and milling head.
- Large travel distances: X-axis: approx. 290mm, Y-axis: approx. 100mm, Z-axis: approx. 200mm.
- Stable column with dovetail slideway.
- Including user-friendly software. Runs under WINDOWS® (see description below).
- Thanks to CNC control of 3 tool axes machining of steel and non-ferrous metals is possible in all dimensions. This also applies to larger work pieces!
- Axes drive with recirculating ball spindles (no backlash) and powerful step motors.
- Otherwise the mechanical design is almost identical to the miller FF 500/BL: Solid, flat-milled compound table in steel with 3 continuous T-slots for size 8 standard T-nuts. Base of vibration-damping cast steel. Stable column with dovetail slideway. Milling head can be pivoted to the left and right by 90°, with powerful, quiet and shock-free running condenser motor.
- Poly V-belt drive for 6 spindle speeds (180 – 2,500/min).
- Additional sleeve feed (30mm) using drilling lever with scale ring (1 graduation line = 1mm). Work piece fixing using steel collets.
- Complete with CNC control unit, CNC programme software, all connecting cables, one each multiple range standard type ER 20 collets 6 – 8 – 10 and 12mm and detailed manual.
Miller FF 500/BL-CNC
Quick ViewMiller FF 500/BL-CNC
Characteristics:
- With brushless direct drive: Quiet and vibration-free with high precision (accuracy 0.05mm).
- Variable speed pre-selection from 200 - 4,000rpm with digit speed display.
- With double roller bearing recirculating ball spindles at all 3 axes and 3 powerful step motors for driving compound table and milling head.
- Large travel distances: X-axis: approx. 290mm, Y-axis: approx. 100mm, Z-axis: approx. 200mm.
- Stable column with dovetail slideway.
- Including user-friendly software. Runs under WINDOWS® (see description below).
- Thanks to CNC control of 3 tool axes machining of steel and non-ferrous metals is possible in all dimensions. This also applies to larger work pieces!
- Axes drive with recirculating ball spindles (no backlash) and powerful step motors.
- Otherwise the mechanical design is almost identical to the miller FF 500/BL: Solid, flat-milled compound table in steel with 3 continuous T-slots for size 8 standard T-nuts. Base of vibration-damping cast steel. Stable column with dovetail slideway. Milling head can be pivoted to the left and right by 90°, with powerful, quiet and shock-free running condenser motor.
- Poly V-belt drive for 6 spindle speeds (180 - 2,500/min).
- Additional sleeve feed (30mm) using drilling lever with scale ring (1 graduation line = 1mm). Work piece fixing using steel collets.
- Complete with CNC control unit, CNC programme software, all connecting cables, one each multiple range standard type ER 20 collets 6 - 8 - 10 and 12mm and detailed manual.
Tungsten carbide milling drill bits (spear drill bits)
For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.
Diameter: 1mm
Useful Length: 6mm
Milling Bit Tungsten Carbide 1mm x 6mm
Quick ViewTungsten carbide milling drill bits (spear drill bits)
For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.
Diameter: 1mm
Useful Length: 6mm
Tungsten carbide milling drill bits (spear drill bits)
For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.
Diameter: 2mm
Useful Length: 8mm
Milling Bit Tungsten Carbide 2mm x 8mm
Quick ViewTungsten carbide milling drill bits (spear drill bits)
For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.
Diameter: 2mm
Useful Length: 8mm
Tungsten carbide milling drill bits (spear drill bits)
For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.
Diameter: 3mm
Useful Length: 12mm
Milling Bit Tungsten Carbide 3mm x 12mm
Quick ViewTungsten carbide milling drill bits (spear drill bits)
For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.
Diameter: 3mm
Useful Length: 12mm
Tungsten carbide milling drill bits (spear drill bits)
For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.
Diameter: 5mm
Milling Bit Tungsten Carbide 5mm
Quick ViewTungsten carbide milling drill bits (spear drill bits)
For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.
Diameter: 5mm
Tungsten carbide milling drill bits (spear drill bits)
For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.
Milling Bits Tungsten Carbide Set (3 Pieces)
Quick ViewTungsten carbide milling drill bits (spear drill bits)
For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.
Tungsten Carbide Milling Bits
Made of wear-resistant highly compressed fine-granular tungsten. Used for vibration-free milling of high accuracy dimensions. It is advisable to secure workpieces well, avoiding accidents. For milling steel, cast steel, non-ferrous metals, plastics and extremely hard materials. May be used for technical work, for engraving and milling of PC cards. Shafts Ø 3.0 or 2.35mm. Here also we recommend the use of MICROMOT Steel Collets
Milling Bits Tungsten Carbide Set 2,3mm
Quick View
Selected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling
Set Includes: 1 x Ø5mm Triangle Milling Bit , 1 x Ø5mm Sphere Milling Bit, 1 x Ø5mm Flat Milling Bit
Note: Recommended to be used with MICROMOT Steel Collets
Milling Bits Wolfram Vanadium Set (3 Pieces)
Quick ViewSelected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling
Set Includes: 1 x Ø5mm Triangle Milling Bit , 1 x Ø5mm Sphere Milling Bit, 1 x Ø5mm Flat Milling Bit
Note: Recommended to be used with MICROMOT Steel Collets
Selected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling
Recomended to be used with MICROMOT Steel Collets
Milling Bits Wolfram Vanadium Set (5 Pieces)
Quick ViewSelected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling
Recomended to be used with MICROMOT Steel Collets
Selected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling
Diameter: 10mm
Recomended to be used with MICROMOT Steel Collets
Milling Bits Wolfram Vanadium Set 10mm
Quick ViewSelected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling
Diameter: 10mm
Recomended to be used with MICROMOT Steel Collets
Selected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling
Diameter: 3mm
Recomended to be used with MICROMOT Steel Collets
Milling Bits Wolfram Vanadium Set 3mm
Quick ViewSelected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling
Diameter: 3mm
Recomended to be used with MICROMOT Steel Collets