MICROMOT glue gun HKP 220
Quick and reliable gluing of metal, wood, plastic (including Plexiglass), glass, ceramics, stoneware, cardboard, leather, polystyrene foams and textiles.
MICROMOT glue gun HKP 220
Quick View
MICROMOT mains adapter NG 5/E
With superior capacity of 5A. In compact NORYL casing (heat resistant – recommended for transformers).
MICROMOT mains adapter NG 5/E
Quick ViewMICROMOT mains adapter NG 5/E
With superior capacity of 5A. In compact NORYL casing (heat resistant - recommended for transformers).
MICROMOT mains adapter NG 2/E
NORYL casing (heat resistant – a necessity for transformer enclosures).
Characteristics:
- Polarised socket for MICROMOT plug.
- Red LED indicates readiness for use.
- PTC (Positive temperature coefficient) element prevents overload (and plugged in tool will not automatically restart). After cooling down the mains plug should be disconnected briefly to reset the adapter.
- With holes for storing bits.
- Foldable tool rest provides a secure place for keeping the MICROMOT tools at the ready.
- Variable speed control with feedback effect for adjusting bit speed to suit the job, as well as providing high torque at low speeds.
MICROMOT mains adapter NG/2 E
Quick View- Polarised socket for MICROMOT plug.
- Red LED indicates readiness for use.
- PTC (Positive temperature coefficient) element prevents overload (and plugged in tool will not automatically restart). After cooling down the mains plug should be disconnected briefly to reset the adapter.
- With holes for storing bits.
- Foldable tool rest provides a secure place for keeping the MICROMOT tools at the ready.
- Variable speed control with feedback effect for adjusting bit speed to suit the job, as well as providing high torque at low speeds.
MICROMOT tool holder
For stationary use of MICROMOT electrical precision tools with metal head in combination with a vise.
Especially suited for industrial drill/grinder IBS/E, belt sander BS/E, longneck angle grinder LHW, angle polisher WP/E, super jig saw STS/E and delta sander OZI/E. Made of glass-fibre reinforced POLYAMIDE.
MICROMOT tool holder
Quick ViewMICROMOT tool holder
For stationary use of MICROMOT electrical precision tools with metal head in combination with a vise.
Especially suited for industrial drill/grinder IBS/E, belt sander BS/E, longneck angle grinder LHW, angle polisher WP/E, super jig saw STS/E and delta sander OZI/E. Made of glass-fibre reinforced POLYAMIDE.
Mill and drill head PF 230
Includes column (35 x 400mm), mounting bracket and fastening screws (the PD 230/E and PD 250/E already have a plane-milled surface). The lathe’s top slide is replaced with the table (supplied) of 110 x 70mm, with 3 T-slots 12 x 6 x 5mm. The lathe now functions as a compound table, with X-Y travel being longitudinally and cross-wise respectively. The mill/drill head is identical to the MICRO miller FF 230.
Included: 3 Collets 6, 8 , 10mm
Mill and drill head PF 230
Quick View
Mill/ Drill MICROMOT 60/EF
The 60/EF with quick-action chuck. Practical for use with different shaft diameters. Slim, easily handled and light. Ideal for working steel, precious metals, glass, ceramics, plastics and precious stones.
Mill/ Drill MICROMOT 60/EF
Quick View
Mill/drill system BFW 40/E
Mill/drill system BFW 40/E, with controller for speeds of 900 – 6,000rpm.
Characteristics:
- The triple ball bearing armature provides direct drive (no gearing).
- Die-cast aluminium head with spindle neck of 43mm (European standard).
- Large, easy to use switch with emergency function. Chart indicates optimum speeds for milling and drilling of various materials.
- The motor operates at 40V, supplied from the power pack/ controller. At this level, the control characteristics are ideal and yield high torque, even at lower speeds. (The compound table, drill stand and step clamps are not included.)
Mill/drill system BFW 40/E
Quick ViewMill/drill system BFW 40/E
Mill/drill system BFW 40/E, with controller for speeds of 900 - 6,000rpm.
Characteristics:
- The triple ball bearing armature provides direct drive (no gearing).
- Die-cast aluminium head with spindle neck of 43mm (European standard).
- Large, easy to use switch with emergency function. Chart indicates optimum speeds for milling and drilling of various materials.
- The motor operates at 40V, supplied from the power pack/ controller. At this level, the control characteristics are ideal and yield high torque, even at lower speeds. (The compound table, drill stand and step clamps are not included.)
Mill/drill unit BFB 2000
For standard drills with 43mm spindle neck.
Characteristics:
- Head tilts through 90°, thus offering a multitude of capabilities: Diagonal drilling, versatile milling without need of special milling bits, milling of diagonal slots.
- Fine feed selectable allowing fine head feed for milling. With dial and depth scale.
- Geared rack and pinion feed for effortless drilling.
- 45mm diameter drill column, 500mm long. Approx. 140mm throat (column outside to tool centre). 65mm stroke.
- Plane-milled, solid base plate approx. 200 x 200mm with two continuous MICROMOT standard T-slots (12 x 6 x 5mm).
- Easy clamping of all common drills with standard 43mm spindle collar.
- Weight approx. 6.5kg.
Mill/drill unit BFB 2000
Quick ViewMill/drill unit BFB 2000
For standard drills with 43mm spindle neck.
Characteristics:
- Head tilts through 90°, thus offering a multitude of capabilities: Diagonal drilling, versatile milling without need of special milling bits, milling of diagonal slots.
- Fine feed selectable allowing fine head feed for milling. With dial and depth scale.
- Geared rack and pinion feed for effortless drilling.
- 45mm diameter drill column, 500mm long. Approx. 140mm throat (column outside to tool centre). 65mm stroke.
- Plane-milled, solid base plate approx. 200 x 200mm with two continuous MICROMOT standard T-slots (12 x 6 x 5mm).
- Easy clamping of all common drills with standard 43mm spindle collar.
- Weight approx. 6.5kg.
Miller FF 500/BL
With variable speed pre-selection from 200 – 4,000rpm and high precision (accuracy 0.05mm). With digital speed indication.
Characteristics:
- The sophisticated control via rotor position and speed sensors guarantees high torque for use of large milling cutters in the lower speed range.
- Solid column with dovetail guides. Milling head can be rotated to the left and right by 90° (with graduation).
- The clampable spindle sleeve is prepared for mounting of the fine feed adapter.
- Tool holder using multiple range collets type ER 20: One each of 6 – 8 – 10 and 12mm are included.
- Height adjustment of milling head via hand wheel.
- Solid plane-milled steel compound table with 3 continuous MICROMOT standard T-slots (12 x 6 x 5mm).
- All 3 hand wheels with graduated scale ring (1 rev. = 2mm).
Miller FF 500/BL
Quick ViewMiller FF 500/BL
With variable speed pre-selection from 200 - 4,000rpm and high precision (accuracy 0.05mm). With digital speed indication.
Characteristics:
- The sophisticated control via rotor position and speed sensors guarantees high torque for use of large milling cutters in the lower speed range.
- Solid column with dovetail guides. Milling head can be rotated to the left and right by 90° (with graduation).
- The clampable spindle sleeve is prepared for mounting of the fine feed adapter.
- Tool holder using multiple range collets type ER 20: One each of 6 - 8 - 10 and 12mm are included.
- Height adjustment of milling head via hand wheel.
- Solid plane-milled steel compound table with 3 continuous MICROMOT standard T-slots (12 x 6 x 5mm).
- All 3 hand wheels with graduated scale ring (1 rev. = 2mm).
Miller FF 500/BL CNC-Ready
With recirculating ball spindles and powerful step motors at all 3 axes.
Interesting for users who already own a control unit or would like to purchase one from another provider on the market.
Three standard plugs (SUB-D 9POLE) are available to connect the control unit. The mechanical construction of the miller is identical to the miller FF 500/BL-CNC.
Miller FF 500/BL CNC-Ready
Quick ViewMiller FF 500/BL CNC-Ready
With recirculating ball spindles and powerful step motors at all 3 axes.
Interesting for users who already own a control unit or would like to purchase one from another provider on the market.
Three standard plugs (SUB-D 9POLE) are available to connect the control unit. The mechanical construction of the miller is identical to the miller FF 500/BL-CNC.
Miller FF 500/BL-CNC
Characteristics:
- With brushless direct drive: Quiet and vibration-free with high precision (accuracy 0.05mm).
- Variable speed pre-selection from 200 – 4,000rpm with digit speed display.
- With double roller bearing recirculating ball spindles at all 3 axes and 3 powerful step motors for driving compound table and milling head.
- Large travel distances: X-axis: approx. 290mm, Y-axis: approx. 100mm, Z-axis: approx. 200mm.
- Stable column with dovetail slideway.
- Including user-friendly software. Runs under WINDOWS® (see description below).
- Thanks to CNC control of 3 tool axes machining of steel and non-ferrous metals is possible in all dimensions. This also applies to larger work pieces!
- Axes drive with recirculating ball spindles (no backlash) and powerful step motors.
- Otherwise the mechanical design is almost identical to the miller FF 500/BL: Solid, flat-milled compound table in steel with 3 continuous T-slots for size 8 standard T-nuts. Base of vibration-damping cast steel. Stable column with dovetail slideway. Milling head can be pivoted to the left and right by 90°, with powerful, quiet and shock-free running condenser motor.
- Poly V-belt drive for 6 spindle speeds (180 – 2,500/min).
- Additional sleeve feed (30mm) using drilling lever with scale ring (1 graduation line = 1mm). Work piece fixing using steel collets.
- Complete with CNC control unit, CNC programme software, all connecting cables, one each multiple range standard type ER 20 collets 6 – 8 – 10 and 12mm and detailed manual.
Miller FF 500/BL-CNC
Quick ViewMiller FF 500/BL-CNC
Characteristics:
- With brushless direct drive: Quiet and vibration-free with high precision (accuracy 0.05mm).
- Variable speed pre-selection from 200 - 4,000rpm with digit speed display.
- With double roller bearing recirculating ball spindles at all 3 axes and 3 powerful step motors for driving compound table and milling head.
- Large travel distances: X-axis: approx. 290mm, Y-axis: approx. 100mm, Z-axis: approx. 200mm.
- Stable column with dovetail slideway.
- Including user-friendly software. Runs under WINDOWS® (see description below).
- Thanks to CNC control of 3 tool axes machining of steel and non-ferrous metals is possible in all dimensions. This also applies to larger work pieces!
- Axes drive with recirculating ball spindles (no backlash) and powerful step motors.
- Otherwise the mechanical design is almost identical to the miller FF 500/BL: Solid, flat-milled compound table in steel with 3 continuous T-slots for size 8 standard T-nuts. Base of vibration-damping cast steel. Stable column with dovetail slideway. Milling head can be pivoted to the left and right by 90°, with powerful, quiet and shock-free running condenser motor.
- Poly V-belt drive for 6 spindle speeds (180 - 2,500/min).
- Additional sleeve feed (30mm) using drilling lever with scale ring (1 graduation line = 1mm). Work piece fixing using steel collets.
- Complete with CNC control unit, CNC programme software, all connecting cables, one each multiple range standard type ER 20 collets 6 - 8 - 10 and 12mm and detailed manual.
Tungsten carbide milling drill bits (spear drill bits)
For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.
Diameter: 1mm
Useful Length: 6mm
Milling Bit Tungsten Carbide 1mm x 6mm
Quick ViewTungsten carbide milling drill bits (spear drill bits)
For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.
Diameter: 1mm
Useful Length: 6mm
Tungsten carbide milling drill bits (spear drill bits)
For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.
Diameter: 2mm
Useful Length: 8mm
Milling Bit Tungsten Carbide 2mm x 8mm
Quick ViewTungsten carbide milling drill bits (spear drill bits)
For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.
Diameter: 2mm
Useful Length: 8mm
Tungsten carbide milling drill bits (spear drill bits)
For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.
Diameter: 3mm
Useful Length: 12mm
Milling Bit Tungsten Carbide 3mm x 12mm
Quick ViewTungsten carbide milling drill bits (spear drill bits)
For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.
Diameter: 3mm
Useful Length: 12mm
Tungsten carbide milling drill bits (spear drill bits)
For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.
Diameter: 5mm
Milling Bit Tungsten Carbide 5mm
Quick ViewTungsten carbide milling drill bits (spear drill bits)
For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.
Diameter: 5mm
Tungsten carbide milling drill bits (spear drill bits)
For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.
Milling Bits Tungsten Carbide Set (3 Pieces)
Quick ViewTungsten carbide milling drill bits (spear drill bits)
For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.
Tungsten Carbide Milling Bits
Made of wear-resistant highly compressed fine-granular tungsten. Used for vibration-free milling of high accuracy dimensions. It is advisable to secure workpieces well, avoiding accidents. For milling steel, cast steel, non-ferrous metals, plastics and extremely hard materials. May be used for technical work, for engraving and milling of PC cards. Shafts Ø 3.0 or 2.35mm. Here also we recommend the use of MICROMOT Steel Collets
Milling Bits Tungsten Carbide Set 2,3mm
Quick View
Selected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling
Set Includes: 1 x Ø5mm Triangle Milling Bit , 1 x Ø5mm Sphere Milling Bit, 1 x Ø5mm Flat Milling Bit
Note: Recommended to be used with MICROMOT Steel Collets
Milling Bits Wolfram Vanadium Set (3 Pieces)
Quick ViewSelected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling
Set Includes: 1 x Ø5mm Triangle Milling Bit , 1 x Ø5mm Sphere Milling Bit, 1 x Ø5mm Flat Milling Bit
Note: Recommended to be used with MICROMOT Steel Collets
Selected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling
Recomended to be used with MICROMOT Steel Collets
Milling Bits Wolfram Vanadium Set (5 Pieces)
Quick ViewSelected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling
Recomended to be used with MICROMOT Steel Collets
Selected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling
Diameter: 10mm
Recomended to be used with MICROMOT Steel Collets
Milling Bits Wolfram Vanadium Set 10mm
Quick ViewSelected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling
Diameter: 10mm
Recomended to be used with MICROMOT Steel Collets
Selected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling
Diameter: 3mm
Recomended to be used with MICROMOT Steel Collets
Milling Bits Wolfram Vanadium Set 3mm
Quick ViewSelected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling
Diameter: 3mm
Recomended to be used with MICROMOT Steel Collets
Selected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling
Diameter: 4mm
Recomended to be used with MICROMOT Steel Collets
Milling Bits Wolfram Vanadium Set 4mm
Quick ViewSelected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling
Diameter: 4mm
Recomended to be used with MICROMOT Steel Collets
Selected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling
Diameter: 6mm
Recomended to be used with MICROMOT Steel Collets
Milling Bits Wolfram Vanadium Set 6mm
Quick ViewSelected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling
Diameter: 6mm
Recomended to be used with MICROMOT Steel Collets
Selected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling
Diameter: 6mm
Recomended to be used with MICROMOT Steel Collets
Milling Bits Wolfram Vanadium Set 6mm
Quick ViewSelected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling
Diameter: 6mm
Recomended to be used with MICROMOT Steel Collets
Selected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling.
Diameter: 8mm
Recomended to be used with MICROMOT Steel Collets
Milling Bits Wolfram Vanadium Set 8mm
Quick ViewSelected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling.
Diameter: 8mm
Recomended to be used with MICROMOT Steel Collets
- Powerful 1000W motor for strong performance in all applications
- Excellent and compact design with a total length of 276 mm and a weight of 2.1 kg
- Soft start for better cutting control.
Milwaukee Angle Grinder AG10-125EK 1000W
Quick View- Powerful 1000W motor for strong performance in all applications
- Excellent and compact design with a total length of 276 mm and a weight of 2.1 kg
- Soft start for better cutting control.
- Powerful 2200W motor with epoxy resin coating for extended lifespan
- Exceptionally compact design with a total length of 485 mm and weight of 5.2 kg
- Spark-resistant guard for added durability
For Angle Grinder Tools Explore our range of Power Tool Accessories:
Milwaukee Angle Grinder AG22-230 2200W
Quick View- Powerful 2200W motor with epoxy resin coating for extended lifespan
- Exceptionally compact design with a total length of 485 mm and weight of 5.2 kg
- Spark-resistant guard for added durability
For Angle Grinder Tools Explore our range of Power Tool Accessories:
- Powerful, PROTECTOR-MOTOR 2400W coated with epoxy resin
- Ergonomically designed for better user comfort
- Soft start for improved cutting control
For Angle Grinder Tools Explore our range of Power Tool Accessories:
Milwaukee Angle Grinder AG24-230 2400W
Quick View- Powerful, PROTECTOR-MOTOR 2400W coated with epoxy resin
- Ergonomically designed for better user comfort
- Soft start for improved cutting control
For Angle Grinder Tools Explore our range of Power Tool Accessories:
- Powerful 1250W PROTECTOR-MOTOR with epoxy resin insulation coating
- Soft start for better cutting control.
- Protection against restart in case of power outage
Milwaukee Angle Grinder AGV 13-125 XSPDE 1200W
Quick View- Powerful 1250W PROTECTOR-MOTOR with epoxy resin insulation coating
- Soft start for better cutting control.
- Protection against restart in case of power outage
- Powerful, 2600W PROTECTOR-MOTOR coated with epoxy resin
- Soft start for better cutting control
- Lower vibration in its category with only 2.5 m/s²
For Angle Grinder Tools Explore our range of Power Tool Accessories:
Milwaukee Angle Grinder AGV 26-230 GE 2600W
Quick View- Powerful, 2600W PROTECTOR-MOTOR coated with epoxy resin
- Soft start for better cutting control
- Lower vibration in its category with only 2.5 m/s²
For Angle Grinder Tools Explore our range of Power Tool Accessories:
Milwaukee Battery 12V – 2Ah M12B2
Milwaukee Battery 12V - 2Ah M12B2
Quick View
Milwaukee Battery 12V – 3Ah M12B3
Milwaukee Battery 12V - 3Ah M12B3
Quick View
Milwaukee Battery 12V – 4Ah M12B4
Milwaukee Battery 12V - 4Ah M12B4
Quick View
Milwaukee Battery 12V – 6Ah M12B6
Milwaukee Battery 12V - 6Ah M12B6
Quick View
Milwaukeee Battery 18V – 3Ah M18HB3
Milwaukee Battery 18V - 3Ah M18HB3 (High Output)
Quick View
Milwaukee Battery 18V – 4Ah M18B4
Milwaukee Battery 18V - 4Ah M18B4
Quick View
Milwaukeee Battery 18V – 5Ah M18B5
Milwaukee Battery 18V - 5Ah M18B5
Quick View
Milwaukee Charger 12-18V M12-18C
Milwaukee Charger 12-18V M12-18C
Quick View
Milwaukee Charger and Batteries Set 12V 1 x 2Ah M12NRG201
Milwaukee Charger and Batteries Set 12V 1 x 2Ah M12NRG201
Quick View
Milwaukee Charger and Batteries Set 12V 2 x 2Ah M12NRG202