PD 230/E, PD 250/E and PD 400 HSS boring tool Set (6 pieces)
One each cutter for 60 degree (metric) and 55 degree (Whitworth) inside threads, 1.3mm – 2.65mm and 4mm. Shaft of Ø 6mm. Length 95mm. The cutters are held by a tool holder (9 x 9mm) that mounts to the tool post of either PD 230/E, PD 250/E or PD 400. Comes in wooden box with sliding lid.
PD 230/E, PD 250/E and PD 400 HSS boring tool Set (6 pieces)
Quick ViewPD 230/E, PD 250/E and PD 400 HSS boring tool Set (6 pieces)
One each cutter for 60 degree (metric) and 55 degree (Whitworth) inside threads, 1.3mm - 2.65mm and 4mm. Shaft of Ø 6mm. Length 95mm. The cutters are held by a tool holder (9 x 9mm) that mounts to the tool post of either PD 230/E, PD 250/E or PD 400. Comes in wooden box with sliding lid.
To be used with the quick change tool post for PD 250/E.
PD 250/E Additional quick change tool holder (separately)
Quick View
PD 250/E 4-Jaw Chuck with Independent Jaws
For clamping angular and asymmetrically shaped work pieces. Capacity up to 80mm. Chuck Ø 75mm.
PD 250/E 4-Jaw Chuck with Independent Jaws
Quick ViewPD 250/E 4-Jaw Chuck with Independent Jaws
For clamping angular and asymmetrically shaped work pieces. Capacity up to 80mm. Chuck Ø 75mm.
Precision V-blocks. Used to clamp various work pieces.
Made from hardened steel, precision ground in pairs. Four different depths of prism incisions V, all at 90°. Size 50 x 30 x 30mm. The solid clamp and knurled knob ensure superb securing of the workpiece. Supplied in a wooden box with sliding lid.
PD 250/E and PD 400 Precision V-blocks
Quick View
PD 250/E and PD 400 Tungsten disposable tips (not depicted)
For the holders as described above.
PD 250/E and PD 400 Tungsten disposable tips (not depicted)
Quick ViewPD 250/E and PD 400 Tungsten disposable tips (not depicted)
For the holders as described above.
Centre turning attachment. For highest accuracy with high rotational precision.
This includes: 1 face plate, 2 fixed centres (MK 2 and MK 1/short) and 1 drive dog. Packed in a wooden box.
PD 250/E Centre turning attachment
Quick ViewCentre turning attachment. For highest accuracy with high rotational precision.
This includes: 1 face plate, 2 fixed centres (MK 2 and MK 1/short) and 1 drive dog. Packed in a wooden box.
PD 250/E Chip collecting tray with splash guard
Made from 1.5mm thick sheet metal, powder coated. Bevelled edges at the front and back allow slight clean-ing. Mounting hole and raised base to secure lathe are pre-drilled. L 550 x W 240 x H 160mm. The depicted lathe is not included in the offer.
PD 250/E Chip collecting tray with splash guard
Quick ViewPD 250/E Chip collecting tray with splash guard
Made from 1.5mm thick sheet metal, powder coated. Bevelled edges at the front and back allow slight clean-ing. Mounting hole and raised base to secure lathe are pre-drilled. L 550 x W 240 x H 160mm. The depicted lathe is not included in the offer.
Collet set with ER 20 collets: For extreme true concentric accuracy. 2 – 10mm.
For high precision machining of round parts. The collet set is mounted instead of the lathe chuck. With 8 collets (2 – 2.5 – 3 – 4 – 5 – 6 – 8 and 10mm). Packed in a wooden box.
PD 250/E Collets
Quick ViewCollet set with ER 20 collets: For extreme true concentric accuracy. 2 - 10mm.
For high precision machining of round parts. The collet set is mounted instead of the lathe chuck. With 8 collets (2 - 2.5 - 3 - 4 - 5 - 6 - 8 and 10mm). Packed in a wooden box.
PD 230/E and PD 250/E Cutter set with tungsten inserts
Three holders (90mm long): for roughing out; for longitudinal work; for 90mm boring bar, holes from 12mm.
Standard tungsten inserts, 55°, plated (commercially available version). Three additional inserts securing screw and key TX 8 are included. 8 x 8mm.
PD 250/E Cutter set with tungsten inserts
Quick ViewPD 230/E and PD 250/E Cutter set with tungsten inserts
Three holders (90mm long): for roughing out; for longitudinal work; for 90mm boring bar, holes from 12mm.
Standard tungsten inserts, 55°, plated (commercially available version). Three additional inserts securing screw and key TX 8 are included. 8 x 8mm.
PD 230/E and PD 250/E Five Piece Set
One each roughing out, parting, finishing cut, left and right cutter. Comes in wooden box with sliding lid. 8 x 8 x 80mm
PD 250/E Five Piece Set
Quick ViewPD 230/E and PD 250/E Five Piece Set
One each roughing out, parting, finishing cut, left and right cutter. Comes in wooden box with sliding lid. 8 x 8 x 80mm
PD 250/E Fixed steady for longer work pieces
Especially for boring. Also required if the tailstock cannot be used to ”counter”. Up to Ø 40mm.
PD 250/E Fixed steady for longer work pieces
Quick View
Used in the PD 250/E quickchange system. Used to part stock and cut slots. The 12 x 3 x 85mm HSS tool contains cobalt.
PD 250/E Parting Tool for the Tool Holder
Quick ViewUsed in the PD 250/E quickchange system. Used to part stock and cut slots. The 12 x 3 x 85mm HSS tool contains cobalt.
PD 250/E Parting Tool Holder
Quick ViewUsed in the PD 250/E quickchange system. Used to part stock and cut slots. The 12 x 3 x 85mm HSS tool contains cobalt.
Professional gear chuck with MK 1
For the tailstock of the PD 250/E. Capacity up to 10mm.
PD 250/E Professional gear chuck with MK 1
Quick ViewProfessional gear chuck with MK 1
For the tailstock of the PD 250/E. Capacity up to 10mm.
PD 250/E Quick change tool post
Easy to use. For quick tool change and easy height adjustment. Includes 2 tool holder elements.
PD 250/E Quick change tool post
Quick View
PD 250/E Self-centering 3-jaw chuck
Suitable for PD 250/E and the dividing attachment. Identical to PD/250 E chuck but with 3 jaws instead of 4. High quality clamping fixture as per DIN 8386, Class 1, concentricity accuracy 0.04mm. Capacity through reversing jaws from 2 – 90mm.
PD 250/E Self-centering 3-jaw chuck
Quick View
PD 250/E Three piece thread cutting set
One cutter for external thread (ground to 60°, metric) one for internal thread, one general cutting. Comes in wooden box with sliding lid. 8 x 8 x 80mm.
PD 250/E Three piece thread cutting set
Quick ViewPD 250/E Three piece thread cutting set
One cutter for external thread (ground to 60°, metric) one for internal thread, one general cutting. Comes in wooden box with sliding lid. 8 x 8 x 80mm.
PD 400 Self-centering 3-jaw chuck
Identical to the lathe chuck of lathe PD 400. Capacity through reversing chucks 3 – 100mm.
PD 400 3-jaw chuck Self-centering
Quick ViewPD 400 Self-centering 3-jaw chuck
Identical to the lathe chuck of lathe PD 400. Capacity through reversing chucks 3 - 100mm.
PD 400 4 Jaw Chuck with Independent Jaws
Used to mount irregularly and asymmetrically shaped objects. Each jaw is adjusted individually and centering is thus achieved manually. Hardened, reversible jaws. Chuck diameter 100mm
PD 400 4 Jaw Chuck Independent Jaws
Quick ViewPD 400 4 Jaw Chuck with Independent Jaws
Used to mount irregularly and asymmetrically shaped objects. Each jaw is adjusted individually and centering is thus achieved manually. Hardened, reversible jaws. Chuck diameter 100mm
PD 400 4 Jaw Chuck with Independent Jaws
Used to mount irregularly and asymmetrically shaped objects. Each jaw is adjusted individually and centering is thus achieved manually. Hardened, reversible jaws. Chuck diameter 100mm.
PD 400 4 Jaw Chuck with Independent Jaws
Quick ViewPD 400 4 Jaw Chuck with Independent Jaws
Used to mount irregularly and asymmetrically shaped objects. Each jaw is adjusted individually and centering is thus achieved manually. Hardened, reversible jaws. Chuck diameter 100mm.
To be used with the quick change tool post for PD 250/E.
PD 400 Additional quick change tool holder (separately)
Quick ViewTo be used with the quick change tool post for PD 250/E.
PD 400 Center Turning Accessory
Ideal when turning with highest possible accuracy. Supplied with 2 dead centres (MK2 and MK3), drive/ face plate with 30mm bore as well as reducing bushes 30/20mm and 30/15mm. A threaded drive pin screws into the headstock flange and the drive plate
PD 400 Center Turning Accessory
Quick ViewPD 400 Center Turning Accessory
Ideal when turning with highest possible accuracy. Supplied with 2 dead centres (MK2 and MK3), drive/ face plate with 30mm bore as well as reducing bushes 30/20mm and 30/15mm. A threaded drive pin screws into the headstock flange and the drive plate
PD 400 Collet attachment with collets
For accurate use on round components. One hardened collet each hardened collet 2 – 3 – 4 – 5 – 6 – 8 – 10 – 12 and 14mm are included. Concentric accuracy better than 0.02mm, much better than a chuck. One soft collet for making a custom size yourself. The included collet attachment is mounted in the place of the headstock chuck. Supplied in a wooden box.
PD 400 Collet attachment with collets
Quick ViewPD 400 Collet attachment with collets
For accurate use on round components. One hardened collet each hardened collet 2 - 3 - 4 - 5 - 6 - 8 - 10 - 12 and 14mm are included. Concentric accuracy better than 0.02mm, much better than a chuck. One soft collet for making a custom size yourself. The included collet attachment is mounted in the place of the headstock chuck. Supplied in a wooden box.
PD 400 Collet Attachment with Collets
For accurate use on round components. One hardened collet each hardened collet 2 – 3 – 4 – 5 – 6 – 8 – 10 – 12 and 14mm are included. Concentric accuracy better than 0.02mm, much better than a chuck. One soft collet for making a custom size yourself. The included collet attachment is mounted in the place of the headstock chuck. Supplied in a wooden box.
PD 400 Collet Attachment with Collets
Quick ViewPD 400 Collet Attachment with Collets
For accurate use on round components. One hardened collet each hardened collet 2 - 3 - 4 - 5 - 6 - 8 - 10 - 12 and 14mm are included. Concentric accuracy better than 0.02mm, much better than a chuck. One soft collet for making a custom size yourself. The included collet attachment is mounted in the place of the headstock chuck. Supplied in a wooden box.
Cutter set with tungsten inserts
Three holders (90mm long):
for roughing out;
for longitudinal work;
for 90mm boring bar, holes from 12mm.
Standard tungsten inserts, 55°, plated (commercially available version). Three additional inserts securing screw and key TX 8 are included. 10 x 10mm.
PD 400 Cutter set with tungsten inserts
Quick ViewCutter set with tungsten inserts
Three holders (90mm long):for roughing out;for longitudinal work;for 90mm boring bar, holes from 12mm.
Standard tungsten inserts, 55°, plated (commercially available version). Three additional inserts securing screw and key TX 8 are included. 10 x 10mm.
PD 400 Faceplate and clamps
Is fitted instead of the standard chuck. Ideal for clamping larger and asymmetrically shaped work pieces. Ø 125 mm. 2 continuous T-slots. With clamping jaws.
PD 400 Faceplate and clamps
Quick ViewPD 400 Faceplate and clamps
Is fitted instead of the standard chuck. Ideal for clamping larger and asymmetrically shaped work pieces. Ø 125 mm. 2 continuous T-slots. With clamping jaws.
PD 400 Five Piece Set
One each roughing out, parting, finishing cut, left and right cutter. Comes in wooden box with sliding lid. 10 x 10 x 80mm.
PD 400 Five Piece Set
Quick ViewPD 400 Five Piece Set
One each roughing out, parting, finishing cut, left and right cutter. Comes in wooden box with sliding lid. 10 x 10 x 80mm.
PD 400 Fixed steady to support longer pieces
Used on the PD 400 when turning long, slender work pieces. Fitted directly to the bed-ways and is used when the tailstock support is inadequate. Maximum Ø 50mm.
PD 400 Fixed steady to support longer pieces
Quick ViewPD 400 Fixed steady to support longer pieces
Used on the PD 400 when turning long, slender work pieces. Fitted directly to the bed-ways and is used when the tailstock support is inadequate. Maximum Ø 50mm.
PD 400 Gear Tooth Chuck
Industrial quality, however not as accurate as the collets. With 10mm adapter which fits into the 10mm collet. Includes the chuck key.
PD 400 Gear Tooth Chuck
Quick ViewPD 400 Gear Tooth Chuck
Industrial quality, however not as accurate as the collets. With 10mm adapter which fits into the 10mm collet. Includes the chuck key.
Splash guard and chip collecting tray for lathe PD 400
Made from 1.5mm steel plate, powder coated. A welded cover protects the motor. Mounting holes and raised base to secure the lathe are pre-drilled. Seeping through of coolant is impossible. Length 800 x width 270 x height 290mm.
PD 400 Splash guard and chip collecting tray
Quick ViewSplash guard and chip collecting tray for lathe PD 400
Made from 1.5mm steel plate, powder coated. A welded cover protects the motor. Mounting holes and raised base to secure the lathe are pre-drilled. Seeping through of coolant is impossible. Length 800 x width 270 x height 290mm.
PD 400 Three piece thread cutting set
One cutter for external thread (ground to 60°, metric) one for internal thread, one general cutting. Comes in wooden box with sliding lid. 10 x 10 x 80mm.
PD 400 Three piece thread cutting set
Quick ViewPD 400 Three piece thread cutting set
One cutter for external thread (ground to 60°, metric) one for internal thread, one general cutting. Comes in wooden box with sliding lid. 10 x 10 x 80mm.
Including two holders. Provides quick tool changes with easy height adjustment. For turning tools 10 x 10mm.
PD 400 Tool Post
Quick View
Travelling steady for PD 400
Fitted to the carriage of the lathe. Indispensable when turning long, slender work pieces. Maximum Ø 50mm.
PD 400 Traveling Steady
Quick ViewTravelling steady for PD 400
Fitted to the carriage of the lathe. Indispensable when turning long, slender work pieces. Maximum Ø 50mm.
Pen-Sander PS 13
Superfine sander with linear (not rotary) sanding motion. Ideal for working on surfaces in recesses, slots and small corners.
Pen-Sander PS 13
Quick View
Microfibre polishing wheel, 15-ply (100mm)
Very soft. For shine polishing of precious and non-precious metals as well as plastic. Especially suitable for spots difficult to access which cannot be reached with rigid discs. Use only with polishing paste or polishing emulsion.
PM/100 Microfibre Polishing Wheel
Quick ViewMicrofibre polishing wheel, 15-ply (100mm)
Very soft. For shine polishing of precious and non-precious metals as well as plastic. Especially suitable for spots difficult to access which cannot be reached with rigid discs. Use only with polishing paste or polishing emulsion.
PM/100 Muslin Polishing Wheel - Felt Cloth
Quick View
PM/100 Muslin Polishing Wheel - Soft
Quick View
Muslin polishing wheel, stiff (100 x 15mm)
Impregnated and especially stiff. For preliminary and shine polishing of gold, silver, platinum, copper, brass, stainless steel and plastic. Use only with polishing paste or polishing emulsion.
PM/100 Muslin polishing wheel - Stiff
Quick ViewMuslin polishing wheel, stiff (100 x 15mm)
Impregnated and especially stiff. For preliminary and shine polishing of gold, silver, platinum, copper, brass, stainless steel and plastic. Use only with polishing paste or polishing emulsion.
Universal polishing bar (80g) made from polishing compound and wax
Particularly suitable for polishing and high shine polishing of precious and nonprecious metals as well as plastic. Also for freshening tarnished aluminium, copper or brass.
PM/100 Polishing Paste
Quick ViewUniversal polishing bar (80g) made from polishing compound and wax
Particularly suitable for polishing and high shine polishing of precious and nonprecious metals as well as plastic. Also for freshening tarnished aluminium, copper or brass.
- Protection against restarting in case of power failure
- Elastic protective gearbox cover provides comfort and protection
- Variable speed selection for optimal speed
Polisher Dewalt DWP849X 1250W
Quick View- Protection against restarting in case of power failure
- Elastic protective gearbox cover provides comfort and protection
- Variable speed selection for optimal speed