Polishing set
Steel wire brush for de-rusting and cleaning steel and non-ferrous metals. Brass wire brush to polish non-ferrous metals and precious metals. Felt wheel is used on painted surfaces and the chamois and cotton wheels provide a high gloss finish on non-ferrous metals and precious metals.
SP/E Polishing Set
Quick ViewPolishing set
Steel wire brush for de-rusting and cleaning steel and non-ferrous metals. Brass wire brush to polish non-ferrous metals and precious metals. Felt wheel is used on painted surfaces and the chamois and cotton wheels provide a high gloss finish on non-ferrous metals and precious metals.
- Powerful, robust V-belt compressor for demanding use
- Belt drive for low speeds and particularly quiet running
- Oil-lubricated piston compressor
Stanley B345/10/100 100lt - 3Hp
Quick View- Powerful, robust V-belt compressor for demanding use
- Belt drive for low speeds and particularly quiet running
- Oil-lubricated piston compressor
- Powerful, robust compressor for simple, commercial use
- Oil-lubricated Piston Condenser
- For single phase alternating current
Stanley D211/8/24 24lt - 2Hp
Quick View- Powerful, robust compressor for simple, commercial use
- Oil-lubricated Piston Condenser
- For single phase alternating current
- Powerful, robust compressor for simple, commercial use
- Oil-lubricated Piston Condenser
- For single phase alternating current
Stanley D211/8/50 50lt - 2Hp
Quick View- Powerful, robust compressor for simple, commercial use
- Oil-lubricated Piston Condenser
- For single phase alternating current
- Handy 6 liter compressor with powerful motor for universal use
- Ideal for stapling, nailing, blowing out, filling tires and working with caulking guns, grease guns and riveting pliers
Stanley DN200/8/6 6lt - 1.5Hp
Quick View- Handy 6 liter compressor with powerful motor for universal use
- Ideal for stapling, nailing, blowing out, filling tires and working with caulking guns, grease guns and riveting pliers
- Steel Extension Tube (Pair)
Steel Extension Tube Draper (Pair)
Quick View- Steel Extension Tube (Pair)
Pack of 2 pieces HSS Jig saw blades. Tooth pitch of 1.06mm, with teeth set and ground. Usable on metals, non-ferrous metals, aluminium and softer alloys, fibreglass, Plexiglass and insulating materials. Fits STS/E and STS 12/E.
STS/E and STS 12/E Jig saw blades made of HSS
Quick View
Pack of 2 pieces Jig saw blades made of special steel. Pitch of 1.5mm, teeth ground and set. Usable on hard and soft woods, plywood, fibreglass reinforced sheets as well as soft plastics.
STS/E and STS 12/E Jig saw Blades made of Special Steel
Quick View
Super jig saw STS/E
This unit offers fantastic and precise cutting capacity.
Precision equipment for cutting! Super Jig saw STS/E offers fantastic and precise cutting capacity.
Super jig saw STS/E
Quick View
Surface planer AH 80
Supporting construction all made of die-cast aluminium with CNC-machined fits. Pre-condition for vibration-free, clean planing of soft and hard woods.
Surface planer AH 80
Quick View
Self-adhesive white corundum sanding discs for TG 125/E
Industrial quality. For sanding soft and hard woods, chipboards, fibre boards, non-ferrous metals, steel, plastics, cork, rubber and minerals. Ø 125mm. One quadratic silicone film for storage and reuse of used sanding discs is included.
T2G 250/E Sanding Discs 80 Grit (5 Pieces)
Quick ViewSelf-adhesive white corundum sanding discs for TG 125/E
Industrial quality. For sanding soft and hard woods, chipboards, fibre boards, non-ferrous metals, steel, plastics, cork, rubber and minerals. Ø 125mm. One quadratic silicone film for storage and reuse of used sanding discs is included.
Table saw FET
For precise, straight cuts without refinishing! For fine mechanics, model building, mould construction, toy manufacture, architects, model carpenters and fitters. With set-screw for fine adjustment of the longitudinal stop by 1/10mm. Height adjustable tungsten-tipped saw blade, tilting through 45°.
Table saw FET
Quick View
Chuck
For drill shank sizes 0.5 to 6.5mm. Max. speed 10,000rpm. Industrial quality with extra high speed accuracy. With 3/8″ thread for MICROMOT bench drill TBM 220.
TBM 220 Chuck
Quick ViewChuck
For drill shank sizes 0.5 to 6.5mm. Max. speed 10,000rpm. Industrial quality with extra high speed accuracy. With 3/8" thread for MICROMOT bench drill TBM 220.
Classic telescopic calibrated scale for construction site use. Total length 5m. 5 sections. Durable lightweight aluminum construction. Graduation in cm & mm.
Telescopic Graduated Scale Stanley
Quick ViewSelf-adhesive white corundum sanding discs for TG 125/E
Industrial quality. For sanding soft and hard woods, chipboards, fibre boards, non-ferrous metals, steel, plastics, cork, rubber and minerals. Ø 125mm. One quadratic silicone film for storage and reuse of used sanding discs is included.
TG 125/E Sanding Discs 150 Grit (5 Pieces)
Quick ViewSelf-adhesive white corundum sanding discs for TG 125/E
Industrial quality. For sanding soft and hard woods, chipboards, fibre boards, non-ferrous metals, steel, plastics, cork, rubber and minerals. Ø 125mm. One quadratic silicone film for storage and reuse of used sanding discs is included.
Self-adhesive white corundum sanding discs for TG 125/E
Industrial quality. For sanding soft and hard woods, chipboards, fibre boards, non-ferrous metals, steel, plastics, cork, rubber and minerals. Ø 125mm. One quadratic silicone film for storage and reuse of used sanding discs is included.
TG 125/E Sanding Discs 240 Grit (5 Pieces)
Quick ViewSelf-adhesive white corundum sanding discs for TG 125/E
Industrial quality. For sanding soft and hard woods, chipboards, fibre boards, non-ferrous metals, steel, plastics, cork, rubber and minerals. Ø 125mm. One quadratic silicone film for storage and reuse of used sanding discs is included.
Self-adhesive white corundum sanding discs for TG 125/E
Industrial quality. For sanding soft and hard woods, chipboards, fibre boards, non-ferrous metals, steel, plastics, cork, rubber and minerals. Ø 125mm. One quadratic silicone film for storage and reuse of used sanding discs is included.
TG 125/E Sanding Discs 80 Grit (5 Pieces)
Quick ViewSelf-adhesive white corundum sanding discs for TG 125/E
Industrial quality. For sanding soft and hard woods, chipboards, fibre boards, non-ferrous metals, steel, plastics, cork, rubber and minerals. Ø 125mm. One quadratic silicone film for storage and reuse of used sanding discs is included.
or THERMOCUT 650, THERMOCUT 230/E and other similar hot wire cutters. Made of NiCr 8020. Spool of 30m x 0.2mm.
THERMOCUT Replacement cutting wire
Quick View
Thicknesser DH 40
Load bearing components are all made of die-cast aluminium, with milled seats for bearings and spindles.
Thicknesser DH 40
Quick View
Three-jaw steel drill chuck
For use with MICROMOT rotary tools Precision drill grinder FBS 12/EF, Precision drill/grinder FBS 240/E, MICROMOT 60/EF and Flexishaft 110/BF. Advantageous when working with different shafts. Capacity: 0.3 – 3.2mm.
Three-jaw steel drill chuck
Quick ViewThree-jaw steel drill chuck
For use with MICROMOT rotary tools Precision drill grinder FBS 12/EF, Precision drill/grinder FBS 240/E, MICROMOT 60/EF and Flexishaft 110/BF. Advantageous when working with different shafts. Capacity: 0.3 - 3.2mm.
- Pistol-grip with dial
- Suitable for use with motor vehicles, cycles, dinghies, etc
- Clip-on connector
- Maximum inflation pressure 8 BAR (115psi)
- Dial reads 0 – 12bar and 0 – 170psi (for guidance only).
Tire Inflator Draper Pistol Grip
Quick View- Pistol-grip with dial
- Suitable for use with motor vehicles, cycles, dinghies, etc
- Clip-on connector
- Maximum inflation pressure 8 BAR (115psi)
- Dial reads 0 - 12bar and 0 - 170psi (for guidance only).
- Pistol-grip tyre inflator fitted with a clip-on connector that’s compatible with most vehicles including; cars, commercial vehicles, motorbikes and trailers
- The easy to read 65mm analogue gauge is attached with a heavy duty rubber cover for increased protection
- Maximum inflation pressure 12 bar (170psi)
Tire Inflator Draper Pistol-Grip
Quick View- Pistol-grip tyre inflator fitted with a clip-on connector that's compatible with most vehicles including; cars, commercial vehicles, motorbikes and trailers
- The easy to read 65mm analogue gauge is attached with a heavy duty rubber cover for increased protection
- Maximum inflation pressure 12 bar (170psi)
Self-adhesive white corundum sanding discs for TG 125/E
Industrial quality. For sanding soft and hard woods, chipboards, fibre boards, non-ferrous metals, steel, plastics, cork, rubber and minerals. Ø 125mm. One quadratic silicone film for storage and reuse of used sanding discs is included.
TSG 250/E Sanding Discs 150 Grit (5 Pieces)
Quick ViewSelf-adhesive white corundum sanding discs for TG 125/E
Industrial quality. For sanding soft and hard woods, chipboards, fibre boards, non-ferrous metals, steel, plastics, cork, rubber and minerals. Ø 125mm. One quadratic silicone film for storage and reuse of used sanding discs is included.
Self-adhesive white corundum sanding discs for TG 125/E
Industrial quality. For sanding soft and hard woods, chipboards, fibre boards, non-ferrous metals, steel, plastics, cork, rubber and minerals. Ø 125mm. One quadratic silicone film for storage and reuse of used sanding discs is included.
TSG 250/E Sanding Discs 240 Grit (5 Pieces)
Quick ViewSelf-adhesive white corundum sanding discs for TG 125/E
Industrial quality. For sanding soft and hard woods, chipboards, fibre boards, non-ferrous metals, steel, plastics, cork, rubber and minerals. Ø 125mm. One quadratic silicone film for storage and reuse of used sanding discs is included.
For the tool Holders
Tungsten Carbide Inserts (10 Pieces)
Quick View
Tungsten Carbide Rasp Cutter
For cutting and milling Tiles, stoneware, wood and plastics
Diameter: 3.2mm
Useful Length: 25mm
Tungsten Carbide Rasp Cutter (3,2mm x 25mm)
Quick View
Universal holder UHZ
With ball joint. To be rotated and swivelled in all directions. 20mm collar for MICROMOT drilling and milling devices.
Universal holder UHZ
Quick ViewUniversal holder UHZ
With ball joint. To be rotated and swivelled in all directions. 20mm collar for MICROMOT drilling and milling devices.
- Extension Tube for WDV10, WDV15A and WDV20ASS
Vacuum Extension Tube Draper for WDV10, WDV15A and WDV20ASS
Quick View- Extension Tube for WDV10, WDV15A and WDV20ASS
- Spare hose for wet and dry vacuums.
Vacuum Hose Draper
Quick View- Spare hose for wet and dry vacuums.
PRIMUS 100
Width of jaws 100mm. Jaw opening 75mm. Distance from long slot centre to long slot centre 135mm. Long slots 105 x 15mm. Weight 5.0kg. Other details as for the PRIMUS 75.
Vice Primus 100
Quick ViewPRIMUS 100
Width of jaws 100mm. Jaw opening 75mm. Distance from long slot centre to long slot centre 135mm. Long slots 105 x 15mm. Weight 5.0kg. Other details as for the PRIMUS 75.
Vice Primus 75
Base body made of special cast iron with CNC-machined guides. Interchangeable gripping jaws. Flat-milled working surface. Spindles with rolled trapezoid thread for ease of operation even during high axial load. Width of jaws 75mm. Jaw opening 65mm. Distance from long slot centre to long slot centre 100mm. Long slots 80 x 11mm. Weight 2.5kg.
Vice Primus 75
Quick ViewVice Primus 75
Base body made of special cast iron with CNC-machined guides. Interchangeable gripping jaws. Flat-milled working surface. Spindles with rolled trapezoid thread for ease of operation even during high axial load. Width of jaws 75mm. Jaw opening 65mm. Distance from long slot centre to long slot centre 100mm. Long slots 80 x 11mm. Weight 2.5kg.
- Multi-purpose machine suitable for experienced and DIY users alike
- Continuous regulation of welding current, Direct fit earth clamp and electrode holder
- Supplied with face mask and combined chipping hammer/wire brush.
Welding Machine Draper D53082 100A
Quick View- Multi-purpose machine suitable for experienced and DIY users alike
- Continuous regulation of welding current, Direct fit earth clamp and electrode holder
- Supplied with face mask and combined chipping hammer/wire brush.
It ensures professional welding up to 10mm in steel, cast iron and stainless steel. With inverter technology. It can be used with all types of electrodes.
Welding Machine Gysmi 160P
Quick View
Welding Machine Gysmi E163
Quick View
It is designed for welding multiple types of electrodes up to 5mm with the best possible quality.
Welding Machine Gysmi E200 FV
Quick View
The EASYMIG 160 is a semi-automatic welding machine combining MIG/MAG, flux-cored wire and MMA welding processes. Thanks to its user-friendly interface and digital display screen, the voltage and wire-feed speed settings are quick and easy to set and adjust. Its ultra-light design makes it extremely easy to move around the worksite. The EASYMIG 160 is recommended for welding steel, stainless steel and aluminium.
Welding Machine Gysmi Easymig 160
Quick View
Single phase inverter welding machine for MMA welding. Built with the latest IGBT inverter technology, it features excellent welding and arc stability.
Welding Machine Gysmi Gysarc 160
Quick View
Single phase MIG/MAG 160A welding machine. Product on wheels, ideal for both professional and DIY use. Features a “SMART” Control panel enabling easy set up even for the non-professional user.
Welding Machine Gysmi Smartmig 162
Quick View
Brass Wheels
Ideal for working on brass, brass alloys, copper, precious metals, semiprecious stones, plastic and wood. For cleaning of electronic components and circuit boards. Shaft of Ø 2.35mm.
Diameter: 22mm
Wheels Brass Set 22mm (5 Pieces)
Quick ViewBrass Wheels
Ideal for working on brass, brass alloys, copper, precious metals, semiprecious stones, plastic and wood. For cleaning of electronic components and circuit boards. Shaft of Ø 2.35mm.
Diameter: 22mm
Steel Wheels
High quality components for best operation. For cleaning, removing rust, sanding, frosting, roughening, rounding-off, etc. of metal, cast iron, plastic, stone and wood. Shaft of Ø 2.35mm.
Diameter: 22mm
Wheels Steel Set 22mm (5 Pieces)
Quick ViewHigh quality components for best operation. For cleaning, removing rust, sanding, frosting, roughening, rounding-off, etc. of metal, cast iron, plastic, stone and wood. Shaft of Ø 2.35mm.
Diameter: 22mm