(+357) 25325087 ilikodomiki@cytanet.com.cy 30 Kolonakiou, 4103,Agios Athanasios, Limassol (+357) 25325060 65 Ilia Kannaourou, 4187, Ypsonas, Limassol

Showing 81–120 of 206 results

Sort by
Show

High quality corundum grinding bits

Bits and sets of fine, high quality materials of consistent hardness. Various shapes for the widest possible range of applications. For grinding and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel. Accurately dimensioned shafts of Ø 2.35 or 3mm ensure maximum concentricity.

Grinding rule: Soft materials = hard grinding bits; hard materials = soft grinding bits! 

Grinding Points Set 6mm

Quick View
0 Reviews
3,56 

High quality corundum grinding bits

Bits and sets of fine, high quality materials of consistent hardness. Various shapes for the widest possible range of applications. For grinding and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel. Accurately dimensioned shafts of Ø 2.35 or 3mm ensure maximum concentricity.

Grinding rule: Soft materials = hard grinding bits; hard materials = soft grinding bits! 

High quality corundum grinding bits

Bits and sets of fine, high quality materials of consistent hardness. Various shapes for the widest possible range of applications. For grinding and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel. Accurately dimensioned shafts of Ø 2.35 or 3mm ensure maximum concentricity.

Grinding rule: Soft materials = hard grinding bits; hard materials = soft grinding bits! 

Grinding Points Set 7mm

Quick View
0 Reviews

High quality corundum grinding bits

Bits and sets of fine, high quality materials of consistent hardness. Various shapes for the widest possible range of applications. For grinding and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel. Accurately dimensioned shafts of Ø 2.35 or 3mm ensure maximum concentricity.

Grinding rule: Soft materials = hard grinding bits; hard materials = soft grinding bits! 

High quality corundum grinding bits

Bits and sets of fine, high quality materials of consistent hardness. Various shapes for the widest possible range of applications. For grinding and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel. Accurately dimensioned shafts of Ø 2.35 or 3mm ensure maximum concentricity.

Grinding rule: Soft materials = hard grinding bits; hard materials = soft grinding bits! 

Grinding Points Set 8mm

Quick View
0 Reviews
2,50 

High quality corundum grinding bits

Bits and sets of fine, high quality materials of consistent hardness. Various shapes for the widest possible range of applications. For grinding and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel. Accurately dimensioned shafts of Ø 2.35 or 3mm ensure maximum concentricity.

Grinding rule: Soft materials = hard grinding bits; hard materials = soft grinding bits! 

High quality corundum grinding bits

Bits and sets of fine, high quality materials of consistent hardness. Various shapes for the widest possible range of applications. For grinding and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel. Accurately dimensioned shafts of Ø 2.35 or 3mm ensure maximum concentricity.

Grinding rule: Soft materials = hard grinding bits; hard materials = soft grinding bits! 

Grinding Points Set 9mm

Quick View
0 Reviews
2,35 

High quality corundum grinding bits

Bits and sets of fine, high quality materials of consistent hardness. Various shapes for the widest possible range of applications. For grinding and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel. Accurately dimensioned shafts of Ø 2.35 or 3mm ensure maximum concentricity.

Grinding rule: Soft materials = hard grinding bits; hard materials = soft grinding bits! 

Holder for bits and cutters

For the clean storage of micro drills, grinding bits, brushes and other rotating tools with shaft diameters of 2.35 – 3.2mm. Without bits and cutters. 2 pieces are included in the delivery.

Holder for bits and cutters

Quick View
0 Reviews

Holder for bits and cutters

For the clean storage of micro drills, grinding bits, brushes and other rotating tools with shaft diameters of 2.35 - 3.2mm. Without bits and cutters. 2 pieces are included in the delivery.

Replacement cutting discs

Made of ceramic compound: 50% aluminium oxide and 50% silicon carbide. Suitable for cutting steel, non-ferrous metal as well as small wood and ceramic bars.

KG/50 Replacement cutting discs

Quick View
0 Reviews
2,35 

Replacement cutting discs

Made of ceramic compound: 50% aluminium oxide and 50% silicon carbide. Suitable for cutting steel, non-ferrous metal as well as small wood and ceramic bars.

Circular saw blade Super Cut, 85mm, 80 teeth

85mm ”Super Cut ” crosscut saw blade for circular saws. Ø 85 x 0.5 x 10mm. 80 teeth. Use on hard and soft woods, plastics. For use with Proxxon table saws.

KGS 80 Cutting Disc 85mm 80 teeth

Quick View
0 Reviews
19,85 
Circular saw blade Super Cut, 85mm, 80 teeth 85mm ''Super Cut '' crosscut saw blade for circular saws. Ø 85 x 0.5 x 10mm. 80 teeth. Use on hard and soft woods, plastics. For use with Proxxon table saws.

KGS 80 Tungsten tipped Disc

Extremely clean cut edges thanks to high tooth count when cutting balsa, plywood, soft wood and glass reinforced plastic boards. Also for cutting hard wood, POLYCARBONATE, plastics and aluminium. Also for table saw FET.

KGS 80 Cutting Disc Tungsten

Quick View
0 Reviews
25,00 

KGS 80 Tungsten tipped Disc

Extremely clean cut edges thanks to high tooth count when cutting balsa, plywood, soft wood and glass reinforced plastic boards. Also for cutting hard wood, POLYCARBONATE, plastics and aluminium. Also for table saw FET.

KGS 80 Cutting disc with reinforcement

Corundum-bound and shatter-proof. For cutting alloyed and non-alloyed steel, stainless steel and non-ferrous metals. Also suitable for wood and plastics.

KGS 80 Cutting Disc with reinforcement

Quick View
0 Reviews
3,40 

KGS 80 Cutting disc with reinforcement

Corundum-bound and shatter-proof. For cutting alloyed and non-alloyed steel, stainless steel and non-ferrous metals. Also suitable for wood and plastics.

Crosscut ‘Super-Cut’ blade

58mm diameter (10mm bore). 80 alternately set teeth. Ideal for hard and soft wood as well as plastic and Pertinax. For fast, clean cuts. Teeth are individually set and sharpened. Superior cutting power!

KS 230 Crosscut 'Super-Cut' Blade

Quick View
0 Reviews
12,15 

Crosscut 'Super-Cut' blade

58mm diameter (10mm bore). 80 alternately set teeth. Ideal for hard and soft wood as well as plastic and Pertinax. For fast, clean cuts. Teeth are individually set and sharpened. Superior cutting power!

KS 230 Saw blade HSS

50mm diameter (10mm bore), 0.5mm thick. Alloy holding a high proportion of tungsten, vanadium and molybdenum for an even structure, high hardness and long lifetime. Fine-toothed. For very fine cuts in non-ferrous metals (aluminium, brass, copper). Also suitable for cutting compound materials like PC cards, and sawing wood and plastics.

KS 230 Saw blade HSS

Quick View
0 Reviews
10,20 

KS 230 Saw blade HSS

50mm diameter (10mm bore), 0.5mm thick. Alloy holding a high proportion of tungsten, vanadium and molybdenum for an even structure, high hardness and long lifetime. Fine-toothed. For very fine cuts in non-ferrous metals (aluminium, brass, copper). Also suitable for cutting compound materials like PC cards, and sawing wood and plastics.

KS 230 Saw Tungsten tipped saw blade

50mm Ø x 1.1mm (10mm bore). 20 teeth. For extremely clean cuts of balsa, plywood. Can also be used for cutting PC cards and POLYCARBONATE.

KS 230 Saw Tungsten tipped saw blade

Quick View
0 Reviews
14,00 

KS 230 Saw Tungsten tipped saw blade

50mm Ø x 1.1mm (10mm bore). 20 teeth. For extremely clean cuts of balsa, plywood. Can also be used for cutting PC cards and POLYCARBONATE.

Solid carbide saw blade

50mm diameter (10mm bore). 0.5mm thick. Fine toothed: ideal for cutting fibreglass sheets up to 3mm, non-ferrous metals, duro-plastics and other ‘difficult’ materials.

KS 230 Solid Carbide Saw Blade

Quick View
0 Reviews

Solid carbide saw blade

50mm diameter (10mm bore). 0.5mm thick. Fine toothed: ideal for cutting fibreglass sheets up to 3mm, non-ferrous metals, duro-plastics and other 'difficult' materials.

Step clamps made of steel

The step clamps set is supplied with the KT 70, but can also be ordered separately. Set consists of 2 stepped blocks and clamps, T-slot nuts of the MICROMOT standard, bolts. For work pieces up to 20mm thickness.

KT 70 Step clamps made of steel for 20mm

Quick View
0 Reviews
30,00 

Step clamps made of steel

The step clamps set is supplied with the KT 70, but can also be ordered separately. Set consists of 2 stepped blocks and clamps, T-slot nuts of the MICROMOT standard, bolts. For work pieces up to 20mm thickness.

Step clamps made of steel

The step clamps set is supplied with the KT 70, but can also be ordered separately. Set consists of 2 stepped blocks and clamps, T-slot nuts of the MICROMOT standard, bolts. For work pieces up to 20mm thickness.

KT 70 Step clamps made of steel for 30mm

Quick View
0 Reviews
Step clamps made of steel The step clamps set is supplied with the KT 70, but can also be ordered separately. Set consists of 2 stepped blocks and clamps, T-slot nuts of the MICROMOT standard, bolts. For work pieces up to 20mm thickness.

Self-adhesive type, for use with corundum bound sanding discs and sanding fleece. Ø 50mm.

LHW Backing Disc

Quick View
0 Reviews
5,65 

Self-adhesive type, for use with corundum bound sanding discs and sanding fleece. Ø 50mm.

With woven reinforcement, 50 x 1 x 10mm. For cutting steel, non-ferrous metals, plastic and wood. Ø 50mm.

LHW Corundum Bound Cutting Disc (5 Pieces)

Quick View
0 Reviews
5,90 

With woven reinforcement, 50 x 1 x 10mm. For cutting steel, non-ferrous metals, plastic and wood. Ø 50mm.

For grinding tempered cast iron, cast iron, stainless steel, non-ferrous metals, wood and plastic. Low wear-resistant. Ø 50mm.

LHW Corundum Fan Sander 100 Grit

Quick View
0 Reviews
5,80 

For grinding tempered cast iron, cast iron, stainless steel, non-ferrous metals, wood and plastic. Low wear-resistant. Ø 50mm.

Used for de-burring, grinding, sharpening and derusting steel and non-ferrous metals. Ø 50mm.

LHW Corundum Grinding Disc

Quick View
0 Reviews
3,66 

Used for de-burring, grinding, sharpening and derusting steel and non-ferrous metals. Ø 50mm.

Self-adhesive type, used on flat and convex surfaces. Ø 50 mm.

LHW Corundum Sanding Disc 150 Grit (12 Pieces)

Quick View
0 Reviews
4,60 
Self-adhesive type, used on flat and convex surfaces. Ø 50 mm.

Self-adhesive type, used on flat and convex surfaces. Ø 50 mm.

LHW Corundum Sanding Disc 80 Grit (12 Pieces)

Quick View
0 Reviews
4,60 
Self-adhesive type, used on flat and convex surfaces. Ø 50 mm.

For model-making, cleaning and smoothing of wood, plastics and glass-fibre reinforced objects. No expenditure of effort is needed, easy and precise handling. Not suitable for metal processing.

LHW Rasp plate

Quick View
0 Reviews

For model-making, cleaning and smoothing of wood, plastics and glass-fibre reinforced objects. No expenditure of effort is needed, easy and precise handling. Not suitable for metal processing.

Self-adhesive type, used for cleaning, matting and sanding of steel, stainless steel and non-ferrous metals. Also used for paint removal. Ø 50 mm.

LHW Sanding Fleece Fine (5 Pieces)

Quick View
0 Reviews
7,50 

Self-adhesive type, used for cleaning, matting and sanding of steel, stainless steel and non-ferrous metals. Also used for paint removal. Ø 50 mm.

Self-adhesive type, used for cleaning, matting and sanding of steel, stainless steel and non-ferrous metals. Also used for paint removal. Ø 50 mm.

LHW Sanding Fleece Medium (5 Pieces)

Quick View
0 Reviews
7,80 

Self-adhesive type, used for cleaning, matting and sanding of steel, stainless steel and non-ferrous metals. Also used for paint removal. Ø 50 mm.

Used on hard materials such as glass, stone, ceramics and even hardened steel. Ø 50mm.

LHW Silicon Carbide Grinding Disc 60 Grit

Quick View
0 Reviews
5,80 

Used on hard materials such as glass, stone, ceramics and even hardened steel. Ø 50mm.

Machine Vise MS 4

Made of die-cast zinc, the MS 4 is perfect for the TBM 220 bench drill machine and MB 200 drill stand.

Machine vice MS 4

Quick View
0 Reviews
20,40 

Machine Vise MS 4

Made of die-cast zinc, the MS 4 is perfect for the TBM 220 bench drill machine and MB 200 drill stand.

Diamond blade

For cutting stone, ceramics, glass or glass-fibre reinforced plastics. Only proper cooling of the diamond band will ensure optimally cut glass or ceramics and enable a long service life of the band. Sparingly coolant liquid can be applied with a brush.

MBS 240/E Diamond Blades

Quick View
0 Reviews
139,85 

Diamond blade

For cutting stone, ceramics, glass or glass-fibre reinforced plastics. Only proper cooling of the diamond band will ensure optimally cut glass or ceramics and enable a long service life of the band. Sparingly coolant liquid can be applied with a brush.

Extra narrow bandsaw blade (3.5mm) for tight radii

Of special tempered steel, with induction-hardened coarse teeth (14 TPI). Especially suited for aluminium and plastics.

MBS 240/E Extra Narrow Blades

Quick View
0 Reviews
20,00 

Extra narrow bandsaw blade (3.5mm) for tight radii

Of special tempered steel, with induction-hardened coarse teeth (14 TPI). Especially suited for aluminium and plastics.

Standard bandsaw blade

Of hardened Swedish steel. Fine-toothed (24 TPI). For steel and brass

MBS 240/E Extremely Narrow

Quick View
0 Reviews

Standard bandsaw blade

Of hardened Swedish steel. Fine-toothed (24 TPI). For steel and brass

Standard bandsaw blade

Of hardened Swedish steel. Fine-toothed (24 TPI). For steel and brass

MBS 240/E Standard Saw Blades - Coarse Toothed

Quick View
0 Reviews
15,40 

Standard bandsaw blade

Of hardened Swedish steel. Fine-toothed (24 TPI). For steel and brass

MBS 240/E Band Bimetal Saw Blades

Carrier belt of alloyed tempering steel, sawing teeth of wear-resistant high-speed steel. Varying teeth 10 – 14 TPI. Ideal for cutting all standard steel qualities, non-ferrous metals and stainless steel.

MBS 240/E Standard Saw Blades - Fine Toothed

Quick View
0 Reviews

MBS 240/E Band Bimetal Saw Blades

Carrier belt of alloyed tempering steel, sawing teeth of wear-resistant high-speed steel. Varying teeth 10 - 14 TPI. Ideal for cutting all standard steel qualities, non-ferrous metals and stainless steel.

With two flute cutters and fishtail profile (cutting to the centre). Enables lowering into non-bored work pieces. For grey-cast iron, hardened cast iron, steel, cast steel, brass, aluminium, glass, plastic and carbon fibre. One piece each 1 – 2 and 3mm. Shaft diameter 3mm.

MF 70 Tungsten milling cutters

Quick View
0 Reviews
26,00 

With two flute cutters and fishtail profile (cutting to the centre). Enables lowering into non-bored work pieces. For grey-cast iron, hardened cast iron, steel, cast steel, brass, aluminium, glass, plastic and carbon fibre. One piece each 1 - 2 and 3mm. Shaft diameter 3mm.

MICRO compound table KT 70

Made of solid aluminium with surface treatment and fitted with adjustable dovetail gibs and three T-slots of the MICROMOT standard (12 x 6 x 5mm).

MICRO Compound table KT 70

Quick View
0 Reviews
128,00 

MICRO compound table KT 70

Made of solid aluminium with surface treatment and fitted with adjustable dovetail gibs and three T-slots of the MICROMOT standard (12 x 6 x 5mm).

MICROMOT drill stand MB 200

Head with dovetail guides can be tilted through 90° (scale ring available). Enables bevelled drilling and versatile milling operations.

MICROMOT drill stand MB 200

Quick View
0 Reviews
127,00 
MICROMOT drill stand MB 200 Head with dovetail guides can be tilted through 90° (scale ring available). Enables bevelled drilling and versatile milling operations.

MICROMOT Flexishaft 110/BF

With 0.3 to 3.2mm quick-action chuck. Dual ball-bearinged milled steel shaft with tool holder for MICROMOT steel collets.

MICROMOT Flexishaft 110/BF

Quick View
0 Reviews
39,00 

MICROMOT Flexishaft 110/BF

With 0.3 to 3.2mm quick-action chuck. Dual ball-bearinged milled steel shaft with tool holder for MICROMOT steel collets.

MICROMOT Flexishaft 110/P

Dual ball-bearinged milled steel shaft with tool holder for MICROMOT steel collets. Ball-bearinged shaft end on machine.

MICROMOT Flexishaft 110/P

Quick View
0 Reviews
45,50 

MICROMOT Flexishaft 110/P

Dual ball-bearinged milled steel shaft with tool holder for MICROMOT steel collets. Ball-bearinged shaft end on machine.

MICROMOT tool holder

For stationary use of MICROMOT electrical precision tools with metal head in combination with a vise.

Especially suited for industrial drill/grinder IBS/E, belt sander BS/E, longneck angle grinder LHW, angle polisher WP/E, super jig saw STS/E and delta sander OZI/E. Made of glass-fibre reinforced POLYAMIDE.

MICROMOT tool holder

Quick View
0 Reviews
7,50 

MICROMOT tool holder

For stationary use of MICROMOT electrical precision tools with metal head in combination with a vise.

Especially suited for industrial drill/grinder IBS/E, belt sander BS/E, longneck angle grinder LHW, angle polisher WP/E, super jig saw STS/E and delta sander OZI/E. Made of glass-fibre reinforced POLYAMIDE.

Tungsten carbide milling drill bits (spear drill bits)

For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.

Diameter: 1mm
Useful Length: 6mm

Milling Bit Tungsten Carbide 1mm x 6mm

Quick View
0 Reviews
9,81 

Tungsten carbide milling drill bits (spear drill bits)

For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.

Diameter: 1mm
Useful Length: 6mm

Tungsten carbide milling drill bits (spear drill bits)

For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.

Diameter: 2mm
Useful Length: 8mm

Milling Bit Tungsten Carbide 2mm x 8mm

Quick View
0 Reviews
9,50 

Tungsten carbide milling drill bits (spear drill bits)

For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.

Diameter: 2mm
Useful Length: 8mm

Tungsten carbide milling drill bits (spear drill bits)

For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.

Diameter: 3mm
Useful Length: 12mm

Milling Bit Tungsten Carbide 3mm x 12mm

Quick View
0 Reviews
10,00 

Tungsten carbide milling drill bits (spear drill bits)

For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.

Diameter: 3mm
Useful Length: 12mm

Back to Top
X
Product has been added to your cart