Rasp cutter with wolfram carbide burrs ( 8.0mm x 12mm)
Rasp cutters 4,0mm x 19mm
Quick ViewRasp cutter with wolfram carbide burrs ( 8.0mm x 12mm)
Rasp cutter with wolfram carbide burrs ( 8.0mm x 12mm)
Rasp cutters 7,5mm x 12mm
Quick ViewRasp cutter with wolfram carbide burrs ( 8.0mm x 12mm)
Rasp cutters 8,0mm x 12mm
Quick ViewRouter base OFV
For MICROMOT units with standard 20mm collar. For slotting, milling grooves and milling edges.
Router base OFV
Quick ViewRouter base OFV
For MICROMOT units with standard 20mm collar. For slotting, milling grooves and milling edges.
For wood and fibreboard: HSS wood router cutters
Router Bits - Angle cutter 45°
Quick ViewFor wood and fibreboard: HSS wood router cutters
Router Bits - Combi cutter 6,5/2,5mm
Quick ViewFor wood and fibreboard: HSS wood router cutters
Router Bits - Core box bit R 3,2mm
Quick ViewFor wood and fibreboard: HSS wood router cutters
Router Bits - Edge cutter with pin 5,0mm
Quick ViewFor wood and fibreboard: HSS wood router cutters
Router Bits - Rebating cutter 6,4mm
Quick ViewFor wood and fibreboard: HSS wood router cutters
Router Bits - Rounding over cutter Ø 6,4mm
Quick ViewFor wood and fibreboard: HSS wood router cutters
Router Bits - Slot cutter Ø 3,2mm
Quick ViewFor wood and fibreboard: HSS wood router cutters
Router Bits - Slot cutter Ø 4,8mm
Quick ViewFor wood and fibreboard: HSS wood router cutters
Router Bits - Slot cutter Ø 6,5mm
Quick ViewFor wood and fibreboard: HSS wood router cutters
Router Bits - V-slot cutter Ø 6,5mm
Quick View10-piece HSS wood router cutter set
Included:
– Slot cutter Ø 3.2 – 4.8 and 6.5,
– Rounding over cutter Ø 6.4,
– V-slot cutter Ø 6.5,
– Combi cutter 6.5/2.5,
– Core box bit R 3.2,
– Rebating cutter 6.4,
– Edge cutter with pin 5, angle cutter 45
Router Bits Set (10 Pieces)
Quick ViewIncluded:
- Slot cutter Ø 3.2 - 4.8 and 6.5,
- Rounding over cutter Ø 6.4, - V-slot cutter Ø 6.5, - Combi cutter 6.5/2.5, - Core box bit R 3.2, - Rebating cutter 6.4, - Edge cutter with pin 5, angle cutter 45Sanding Caps
Made of standard corundum. For sanding, smoothing and polishing of malleable cast iron, grey cast iron, stainless steel, steel, non-ferrous metals, wood and plastic. Can also be used for chamfering. For Steel use high, for wood medium and plastic low rotational speed.
Sanding Caps Set 120G (10 Pieces)
Quick ViewSanding Caps
Made of standard corundum For sanding, smoothing and polishing of malleable cast iron, grey cast iron, stainless steel, steel, non-ferrous metals, wood and plastic. Can also be used for chamfering. For Steel use high, for wood medium and plastic low rotational speed.
Included:
– 1 Arbor
– 10 x 120 grit
Sanding Caps Set 120G with Arbor (10 Pieces)
Quick ViewSanding Caps
Made of standard corundum For sanding, smoothing and polishing of malleable cast iron, grey cast iron, stainless steel, steel, non-ferrous metals, wood and plastic. Can also be used for chamfering. For Steel use high, for wood medium and plastic low rotational speed.
Included:
- 1 Arbor
- 10 x 120 grit
Sanding Caps
Made of standard corundum. For sanding, smoothing and polishing of malleable cast iron, grey cast iron, stainless steel, steel, non-ferrous metals, wood and plastic. Can also be used for chamfering. For Steel use high, for wood medium and plastic low rotational speed.
Sanding Caps Set 150G (10 Pieces)
Quick ViewSanding Caps
Made of standard corundum For sanding, smoothing and polishing of malleable cast iron, grey cast iron, stainless steel, steel, non-ferrous metals, wood and plastic. Can also be used for chamfering. For Steel use high, for wood medium and plastic low rotational speed.
Included:
– 1 Arbor
– 10 x 150grit
Sanding Caps Set 150G with Arbor (10 Pieces)
Quick ViewSanding Caps
Made of standard corundum For sanding, smoothing and polishing of malleable cast iron, grey cast iron, stainless steel, steel, non-ferrous metals, wood and plastic. Can also be used for chamfering. For Steel use high, for wood medium and plastic low rotational speed.
Included:
- 1 Arbor
- 10 x 150grit
Sanding Discs
Made of standard corundum.areas. For sanding, smoothing and polishing of malleable cast iron, grey cast iron, stainless steel, steel, non-ferrous metals, wood and plastic. Can also be used for chamfering. For Steel use high, for wood medium and plastic low rotational speed.
Included:
– 5 Sanding Discs 120 grit
– 5 Sanding Discs 150grit
Sanding Dics Set 120G and 150G
Quick ViewSanding Discs
Made of standard corundum.areas. For sanding, smoothing and polishing of malleable cast iron, grey cast iron, stainless steel, steel, non-ferrous metals, wood and plastic. Can also be used for chamfering. For Steel use high, for wood medium and plastic low rotational speed.
Included:
- 5 Sanding Discs 120 grit
- 5 Sanding Discs 150grit
Sanding Discs
Made of standard corundum.areas. For sanding, smoothing and polishing of malleable cast iron, grey cast iron, stainless steel, steel, non-ferrous metals, wood and plastic. Can also be used for chamfering. For Steel use high, for wood medium and plastic low rotational speed.
Included:
– 1 Arbor
– 5 Sanding Discs 120 grit
– 5 Sanding Discs 150grit
Sanding Dics Set 120G and 150G with Arbor
Quick ViewSanding Discs
Made of standard corundum.areas. For sanding, smoothing and polishing of malleable cast iron, grey cast iron, stainless steel, steel, non-ferrous metals, wood and plastic. Can also be used for chamfering. For Steel use high, for wood medium and plastic low rotational speed.
Included:
- 1 Arbor
- 5 Sanding Discs 120 grit
- 5 Sanding Discs 150grit
Sanding Discs
Made of standard corundum.areas. For sanding, smoothing and polishing of malleable cast iron, grey cast iron, stainless steel, steel, non-ferrous metals, wood and plastic. Can also be used for chamfering. For Steel use high, for wood medium and plastic low rotational speed.
Included:
– 5 Sanding Discs 80 grit
– 5 Sanding Discs 150grit
Sanding Dics Set 80G and 150G (10 Pieces)
Quick ViewSanding Discs
Made of standard corundum.areas. For sanding, smoothing and polishing of malleable cast iron, grey cast iron, stainless steel, steel, non-ferrous metals, wood and plastic. Can also be used for chamfering. For Steel use high, for wood medium and plastic low rotational speed.
Included:
- 5 Sanding Discs 80 grit
- 5 Sanding Discs 150grit
Sanding Discs
Made of standard corundum.areas. For sanding, smoothing and polishing of malleable cast iron, grey cast iron, stainless steel, steel, non-ferrous metals, wood and plastic. Can also be used for chamfering. For Steel use high, for wood medium and plastic low rotational speed.
Included:
– 1 Arbor
– 10 x 150grit
Sanding Dics Set with 80G and 150G Arbor (10 Pieces)
Quick ViewSanding Discs
Made of standard corundum.areas. For sanding, smoothing and polishing of malleable cast iron, grey cast iron, stainless steel, steel, non-ferrous metals, wood and plastic. Can also be used for chamfering. For Steel use high, for wood medium and plastic low rotational speed.
Included:
- 1 Arbor
- 10 x 150grit
Silicon carbide. With 12.7mm bore. Soft compound for very hard materials.
SP/E and BSG 220 Spare discs - Corundum
Quick ViewCorundum (grade N). With 12.7mm bore.
SP/E and BSG 220 Spare discs - Silicon Carbide
Quick ViewCorundum (grade N). With 12.7mm bore.
Polishing set
Steel wire brush for de-rusting and cleaning steel and non-ferrous metals. Brass wire brush to polish non-ferrous metals and precious metals. Felt wheel is used on painted surfaces and the chamois and cotton wheels provide a high gloss finish on non-ferrous metals and precious metals.
SP/E Polishing Set
Quick ViewPolishing set
Steel wire brush for de-rusting and cleaning steel and non-ferrous metals. Brass wire brush to polish non-ferrous metals and precious metals. Felt wheel is used on painted surfaces and the chamois and cotton wheels provide a high gloss finish on non-ferrous metals and precious metals.
Pack of 2 pieces HSS Jig saw blades. Tooth pitch of 1.06mm, with teeth set and ground. Usable on metals, non-ferrous metals, aluminium and softer alloys, fibreglass, Plexiglass and insulating materials. Fits STS/E and STS 12/E.
STS/E and STS 12/E Jig saw blades made of HSS
Quick ViewPack of 2 pieces Jig saw blades made of special steel. Pitch of 1.5mm, teeth ground and set. Usable on hard and soft woods, plywood, fibreglass reinforced sheets as well as soft plastics.
STS/E and STS 12/E Jig saw Blades made of Special Steel
Quick ViewSelf-adhesive white corundum sanding discs for TG 125/E
Industrial quality. For sanding soft and hard woods, chipboards, fibre boards, non-ferrous metals, steel, plastics, cork, rubber and minerals. Ø 125mm. One quadratic silicone film for storage and reuse of used sanding discs is included.
T2G 250/E Sanding Discs 80 Grit (5 Pieces)
Quick ViewSelf-adhesive white corundum sanding discs for TG 125/E
Industrial quality. For sanding soft and hard woods, chipboards, fibre boards, non-ferrous metals, steel, plastics, cork, rubber and minerals. Ø 125mm. One quadratic silicone film for storage and reuse of used sanding discs is included.
Chuck
For drill shank sizes 0.5 to 6.5mm. Max. speed 10,000rpm. Industrial quality with extra high speed accuracy. With 3/8″ thread for MICROMOT bench drill TBM 220.
TBM 220 Chuck
Quick ViewChuck
For drill shank sizes 0.5 to 6.5mm. Max. speed 10,000rpm. Industrial quality with extra high speed accuracy. With 3/8" thread for MICROMOT bench drill TBM 220.
Self-adhesive white corundum sanding discs for TG 125/E
Industrial quality. For sanding soft and hard woods, chipboards, fibre boards, non-ferrous metals, steel, plastics, cork, rubber and minerals. Ø 125mm. One quadratic silicone film for storage and reuse of used sanding discs is included.
TG 125/E Sanding Discs 150 Grit (5 Pieces)
Quick ViewSelf-adhesive white corundum sanding discs for TG 125/E
Industrial quality. For sanding soft and hard woods, chipboards, fibre boards, non-ferrous metals, steel, plastics, cork, rubber and minerals. Ø 125mm. One quadratic silicone film for storage and reuse of used sanding discs is included.
Self-adhesive white corundum sanding discs for TG 125/E
Industrial quality. For sanding soft and hard woods, chipboards, fibre boards, non-ferrous metals, steel, plastics, cork, rubber and minerals. Ø 125mm. One quadratic silicone film for storage and reuse of used sanding discs is included.
TG 125/E Sanding Discs 240 Grit (5 Pieces)
Quick ViewSelf-adhesive white corundum sanding discs for TG 125/E
Industrial quality. For sanding soft and hard woods, chipboards, fibre boards, non-ferrous metals, steel, plastics, cork, rubber and minerals. Ø 125mm. One quadratic silicone film for storage and reuse of used sanding discs is included.
Self-adhesive white corundum sanding discs for TG 125/E
Industrial quality. For sanding soft and hard woods, chipboards, fibre boards, non-ferrous metals, steel, plastics, cork, rubber and minerals. Ø 125mm. One quadratic silicone film for storage and reuse of used sanding discs is included.
TG 125/E Sanding Discs 80 Grit (5 Pieces)
Quick ViewSelf-adhesive white corundum sanding discs for TG 125/E
Industrial quality. For sanding soft and hard woods, chipboards, fibre boards, non-ferrous metals, steel, plastics, cork, rubber and minerals. Ø 125mm. One quadratic silicone film for storage and reuse of used sanding discs is included.
or THERMOCUT 650, THERMOCUT 230/E and other similar hot wire cutters. Made of NiCr 8020. Spool of 30m x 0.2mm.
THERMOCUT Replacement cutting wire
Quick ViewThree-jaw steel drill chuck
For use with MICROMOT rotary tools Precision drill grinder FBS 12/EF, Precision drill/grinder FBS 240/E, MICROMOT 60/EF and Flexishaft 110/BF. Advantageous when working with different shafts. Capacity: 0.3 – 3.2mm.
Three-jaw steel drill chuck
Quick ViewThree-jaw steel drill chuck
For use with MICROMOT rotary tools Precision drill grinder FBS 12/EF, Precision drill/grinder FBS 240/E, MICROMOT 60/EF and Flexishaft 110/BF. Advantageous when working with different shafts. Capacity: 0.3 - 3.2mm.
Self-adhesive white corundum sanding discs for TG 125/E
Industrial quality. For sanding soft and hard woods, chipboards, fibre boards, non-ferrous metals, steel, plastics, cork, rubber and minerals. Ø 125mm. One quadratic silicone film for storage and reuse of used sanding discs is included.
TSG 250/E Sanding Discs 150 Grit (5 Pieces)
Quick ViewSelf-adhesive white corundum sanding discs for TG 125/E
Industrial quality. For sanding soft and hard woods, chipboards, fibre boards, non-ferrous metals, steel, plastics, cork, rubber and minerals. Ø 125mm. One quadratic silicone film for storage and reuse of used sanding discs is included.
Self-adhesive white corundum sanding discs for TG 125/E
Industrial quality. For sanding soft and hard woods, chipboards, fibre boards, non-ferrous metals, steel, plastics, cork, rubber and minerals. Ø 125mm. One quadratic silicone film for storage and reuse of used sanding discs is included.
TSG 250/E Sanding Discs 240 Grit (5 Pieces)
Quick ViewSelf-adhesive white corundum sanding discs for TG 125/E
Industrial quality. For sanding soft and hard woods, chipboards, fibre boards, non-ferrous metals, steel, plastics, cork, rubber and minerals. Ø 125mm. One quadratic silicone film for storage and reuse of used sanding discs is included.
Tungsten Carbide Rasp Cutter
For cutting and milling Tiles, stoneware, wood and plastics
Diameter: 3.2mm
Useful Length: 25mm
Tungsten Carbide Rasp Cutter (3,2mm x 25mm)
Quick ViewUniversal holder UHZ
With ball joint. To be rotated and swivelled in all directions. 20mm collar for MICROMOT drilling and milling devices.
Universal holder UHZ
Quick ViewUniversal holder UHZ
With ball joint. To be rotated and swivelled in all directions. 20mm collar for MICROMOT drilling and milling devices.
PRIMUS 100
Width of jaws 100mm. Jaw opening 75mm. Distance from long slot centre to long slot centre 135mm. Long slots 105 x 15mm. Weight 5.0kg. Other details as for the PRIMUS 75.
Vice Primus 100
Quick ViewPRIMUS 100
Width of jaws 100mm. Jaw opening 75mm. Distance from long slot centre to long slot centre 135mm. Long slots 105 x 15mm. Weight 5.0kg. Other details as for the PRIMUS 75.