(+357) 25325087 ilikodomiki@cytanet.com.cy 30 Kolonakiou, 4103,Agios Athanasios, Limassol (+357) 25325060 65 Ilia Kannaourou, 4187, Ypsonas, Limassol

Showing 161–200 of 331 results

Sort by
Show

MBS 240/E Band Bimetal Saw Blades

Carrier belt of alloyed tempering steel, sawing teeth of wear-resistant high-speed steel. Varying teeth 10 – 14 TPI. Ideal for cutting all standard steel qualities, non-ferrous metals and stainless steel.

MBS 240/E Standard Saw Blades - Fine Toothed

Quick View
0 Reviews

MBS 240/E Band Bimetal Saw Blades

Carrier belt of alloyed tempering steel, sawing teeth of wear-resistant high-speed steel. Varying teeth 10 - 14 TPI. Ideal for cutting all standard steel qualities, non-ferrous metals and stainless steel.

For machining circular work pieces, manufacturing off-set holes and milled out portions, milling key surfaces, four-sided, sixsided materials, etc.

Absolute accurate division due to nonius at the base body. With reversed chuck jaws: Capacity inside 1.5 to 32mm, outside 12 to 65mm. Bore of 11mm (for processing longer spindles in a vertical position).

With fastening bores for horizontal and vertical mounting and suitable slot nuts and fastening screws for mounting to the MICRO miller MF 70 and the MICRO compound table KT 70.

Size: 72 x 64 x 38mm. In wooden box with sliding lid.

Categories:

MF 70 and KT 70 Dividing head

Quick View
0 Reviews

For machining circular work pieces, manufacturing off-set holes and milled out portions, milling key surfaces, four-sided, sixsided materials, etc.

Absolute accurate division due to nonius at the base body. With reversed chuck jaws: Capacity inside 1.5 to 32mm, outside 12 to 65mm. Bore of 11mm (for processing longer spindles in a vertical position).

With fastening bores for horizontal and vertical mounting and suitable slot nuts and fastening screws for mounting to the MICRO miller MF 70 and the MICRO compound table KT 70.

Size: 72 x 64 x 38mm. In wooden box with sliding lid.

With two flute cutters and fishtail profile (cutting to the centre). Enables lowering into non-bored work pieces. For grey-cast iron, hardened cast iron, steel, cast steel, brass, aluminium, glass, plastic and carbon fibre. One piece each 1 – 2 and 3mm. Shaft diameter 3mm.

MF 70 Tungsten milling cutters

Quick View
0 Reviews
26,00 

With two flute cutters and fishtail profile (cutting to the centre). Enables lowering into non-bored work pieces. For grey-cast iron, hardened cast iron, steel, cast steel, brass, aluminium, glass, plastic and carbon fibre. One piece each 1 - 2 and 3mm. Shaft diameter 3mm.

Of solid aluminium (surface-compacted). With two step motors for the axes X (transverse) and Y (lengthwise). Table size and travel distances, see description of MF 70/CNC-ready above.

Categories:

MF 70/CNC-Ready Micro Compound Table

Quick View
0 Reviews
Of solid aluminium (surface-compacted). With two step motors for the axes X (transverse) and Y (lengthwise). Table size and travel distances, see description of MF 70/CNC-ready above.

MICRO bandsaw MBS 240/E

Solid, ribbed die-cast aluminium housing (no tubular or sheet metal construction).

MICRO Bandsaw MBS 240/E

Quick View
0 Reviews
476,00 
MICRO bandsaw MBS 240/E Solid, ribbed die-cast aluminium housing (no tubular or sheet metal construction).

MICRO compound table KT 70

Made of solid aluminium with surface treatment and fitted with adjustable dovetail gibs and three T-slots of the MICROMOT standard (12 x 6 x 5mm).

MICRO Compound table KT 70

Quick View
0 Reviews
128,00 

MICRO compound table KT 70

Made of solid aluminium with surface treatment and fitted with adjustable dovetail gibs and three T-slots of the MICROMOT standard (12 x 6 x 5mm).

MICRO cutter MIC

For cutting wood, plastics, glass fibre reinforced plastic, paper, cardboard, foils and similar materials. With 0.5mm cutting width.

 

MICRO cutter MIC

Quick View
0 Reviews
124,80 
MICRO cutter MIC For cutting wood, plastics, glass fibre reinforced plastic, paper, cardboard, foils and similar materials. With 0.5mm cutting width.  

MICRO Heat gun MH 550

For shrinking sleeves (many devices available on the market are simply too large) and many more kinds of other applications. Small, robust and powerful. Complete with 3 additional nozzles.

MICRO Heat gun MH 550

Quick View
0 Reviews
60,00 
MICRO Heat gun MH 550 For shrinking sleeves (many devices available on the market are simply too large) and many more kinds of other applications. Small, robust and powerful. Complete with 3 additional nozzles.

MICRO miller FF 230

The headstock swivels through 360°, indicated on a scale.

Categories:

MICRO miller FF 230

Quick View
0 Reviews
MICRO miller FF 230 The headstock swivels through 360°, indicated on a scale.

MICRO shaper MP 400

For chamfering, cutting grooves, slots, recesses, radii and other profiles. For crafting picture frames and for separating. Also enables exact manufacturing of edges and longitudinal cuts (for model building, e.g. for doors, flaps and housing parts).

 

MICRO Shaper MP 400

Quick View
0 Reviews
282,24 
MICRO shaper MP 400 For chamfering, cutting grooves, slots, recesses, radii and other profiles. For crafting picture frames and for separating. Also enables exact manufacturing of edges and longitudinal cuts (for model building, e.g. for doors, flaps and housing parts).  

MICRO woodturning lathe DB 250

Turning in miniature is a pleasing hobby. One can make glasses, cups, saucers, vases and columns for a doll house. In model trains, one can make lighting masts, windows, tanks. Limbs for marionettes and hundreds of classical miniature turning tasks may be carried out with ease.

MICRO woodturning lathe DB 250

Quick View
0 Reviews
220,00 
MICRO woodturning lathe DB 250 Turning in miniature is a pleasing hobby. One can make glasses, cups, saucers, vases and columns for a doll house. In model trains, one can make lighting masts, windows, tanks. Limbs for marionettes and hundreds of classical miniature turning tasks may be carried out with ease.

MICROFLAM gas soldering set MGS

For working with open flame or with catalyst unit in combination with adapters. For soldering, hot-cutting, woodburning and shrinking of sleeves.

MICROFLAM gas soldering set MGS

Quick View
0 Reviews
22,30 

MICROFLAM gas soldering set MGS

For working with open flame or with catalyst unit in combination with adapters. For soldering, hot-cutting, woodburning and shrinking of sleeves.

MICROFLAME burner MFB/E

Used for soldering, de-soldering, brazing, heating of work pieces, tinning. Also for use in cooking and pastry making.

MICROFLAME burner MFB/E

Quick View
0 Reviews
52,90 

MICROFLAME burner MFB/E

Used for soldering, de-soldering, brazing, heating of work pieces, tinning. Also for use in cooking and pastry making.

MICROMOT 230/E

For drilling, milling, grinding, polishing, brushing, cutting, and engraving. The extremely slim housing (of glass-fibre reinforced POLYAMIDE) with a soft component grip area enables the unit to be handled with two fingers (pen grip).

MICROMOT 230/E

Quick View
0 Reviews
103,00 
MICROMOT 230/E For drilling, milling, grinding, polishing, brushing, cutting, and engraving. The extremely slim housing (of glass-fibre reinforced POLYAMIDE) with a soft component grip area enables the unit to be handled with two fingers (pen grip).

MICROMOT 60/E with mains adapter and 34bits

Complete set with MICROMOT drill/grinder 50/E, mains adapter and 34 bits and cutters of dental quality. The best set for electronic hobbyists, model-builders, mechanics, jewelers, opticians, artists, chiropodists, dental technicians, tool and casting makers, etc.

MICROMOT 60/E with mains adapter and 34bits

Quick View
0 Reviews
106,50 
MICROMOT 60/E with mains adapter and 34bits Complete set with MICROMOT drill/grinder 50/E, mains adapter and 34 bits and cutters of dental quality. The best set for electronic hobbyists, model-builders, mechanics, jewelers, opticians, artists, chiropodists, dental technicians, tool and casting makers, etc.

MICROMOT drill stand MB 200

Head with dovetail guides can be tilted through 90° (scale ring available). Enables bevelled drilling and versatile milling operations.

MICROMOT drill stand MB 200

Quick View
0 Reviews
127,00 
MICROMOT drill stand MB 200 Head with dovetail guides can be tilted through 90° (scale ring available). Enables bevelled drilling and versatile milling operations.

MICROMOT drill/grinder 60/E

With a diameter of only 35mm and its low weight (230g) it offers convenient handling second to none in its class. The balanced motor effortlessly drives the ground ball bearing spindle allowing for a quiet run with a pleasant sound.

Categories:

MICROMOT drill/grinder 60/E

Quick View
0 Reviews

MICROMOT drill/grinder 60/E

With a diameter of only 35mm and its low weight (230g) it offers convenient handling second to none in its class. The balanced motor effortlessly drives the ground ball bearing spindle allowing for a quiet run with a pleasant sound.

MICROMOT Flexishaft 110/BF

With 0.3 to 3.2mm quick-action chuck. Dual ball-bearinged milled steel shaft with tool holder for MICROMOT steel collets.

MICROMOT Flexishaft 110/BF

Quick View
0 Reviews
39,00 

MICROMOT Flexishaft 110/BF

With 0.3 to 3.2mm quick-action chuck. Dual ball-bearinged milled steel shaft with tool holder for MICROMOT steel collets.

MICROMOT Flexishaft 110/P

Dual ball-bearinged milled steel shaft with tool holder for MICROMOT steel collets. Ball-bearinged shaft end on machine.

MICROMOT Flexishaft 110/P

Quick View
0 Reviews
45,50 

MICROMOT Flexishaft 110/P

Dual ball-bearinged milled steel shaft with tool holder for MICROMOT steel collets. Ball-bearinged shaft end on machine.

MICROMOT glue gun HKP 220

Quick and reliable gluing of metal, wood, plastic (including Plexiglass), glass, ceramics, stoneware, cardboard, leather, polystyrene foams and textiles.

MICROMOT glue gun HKP 220

Quick View
0 Reviews
24,70 
MICROMOT glue gun HKP 220 Quick and reliable gluing of metal, wood, plastic (including Plexiglass), glass, ceramics, stoneware, cardboard, leather, polystyrene foams and textiles.

MICROMOT mains adapter NG 5/E

With superior capacity of 5A. In compact NORYL casing (heat resistant – recommended for transformers).

MICROMOT mains adapter NG 5/E

Quick View
0 Reviews
86,50 

MICROMOT mains adapter NG 5/E

With superior capacity of 5A. In compact NORYL casing (heat resistant - recommended for transformers).

MICROMOT mains adapter NG 2/E

NORYL casing (heat resistant – a necessity for transformer enclosures).

Characteristics:

  • Polarised socket for MICROMOT plug.
  • Red LED indicates readiness for use.
  • PTC (Positive temperature coefficient) element prevents overload (and plugged in tool will not automatically restart). After cooling down the mains plug should be disconnected briefly to reset the adapter.
  • With holes for storing bits.
  • Foldable tool rest provides a secure place for keeping the MICROMOT tools at the ready.
  • Variable speed control with feedback effect for adjusting bit speed to suit the job, as well as providing high torque at low speeds.

MICROMOT mains adapter NG/2 E

Quick View
0 Reviews
46,50 
MICROMOT mains adapter NG 2/E NORYL casing (heat resistant - a necessity for transformer enclosures). Characteristics:
  • Polarised socket for MICROMOT plug.
  • Red LED indicates readiness for use.
  • PTC (Positive temperature coefficient) element prevents overload (and plugged in tool will not automatically restart). After cooling down the mains plug should be disconnected briefly to reset the adapter.
  • With holes for storing bits.
  • Foldable tool rest provides a secure place for keeping the MICROMOT tools at the ready.
  • Variable speed control with feedback effect for adjusting bit speed to suit the job, as well as providing high torque at low speeds.

MICROMOT tool holder

For stationary use of MICROMOT electrical precision tools with metal head in combination with a vise.

Especially suited for industrial drill/grinder IBS/E, belt sander BS/E, longneck angle grinder LHW, angle polisher WP/E, super jig saw STS/E and delta sander OZI/E. Made of glass-fibre reinforced POLYAMIDE.

MICROMOT tool holder

Quick View
0 Reviews
7,50 

MICROMOT tool holder

For stationary use of MICROMOT electrical precision tools with metal head in combination with a vise.

Especially suited for industrial drill/grinder IBS/E, belt sander BS/E, longneck angle grinder LHW, angle polisher WP/E, super jig saw STS/E and delta sander OZI/E. Made of glass-fibre reinforced POLYAMIDE.

Mill and drill head PF 230

Includes column (35 x 400mm), mounting bracket and fastening screws (the PD 230/E and PD 250/E already have a plane-milled surface).  The lathe’s top slide is replaced with the table (supplied) of 110 x 70mm, with 3 T-slots 12 x 6 x 5mm. The lathe now functions as a compound table, with X-Y travel being longitudinally and cross-wise respectively. The mill/drill head is identical to the MICRO miller FF 230.

Included: 3 Collets 6, 8 , 10mm

Categories:

Mill and drill head PF 230

Quick View
0 Reviews
Mill and drill head PF 230 Includes column (35 x 400mm), mounting bracket and fastening screws (the PD 230/E and PD 250/E already have a plane-milled surface).  The lathe’s top slide is replaced with the table (supplied) of 110 x 70mm, with 3 T-slots 12 x 6 x 5mm. The lathe now functions as a compound table, with X-Y travel being longitudinally and cross-wise respectively. The mill/drill head is identical to the MICRO miller FF 230. Included: 3 Collets 6, 8 , 10mm

Mill/ Drill MICROMOT 60/EF

The 60/EF with quick-action chuck. Practical for use with different shaft diameters. Slim, easily handled and light. Ideal for working steel, precious metals, glass, ceramics, plastics and precious stones.

Mill/ Drill MICROMOT 60/EF

Quick View
0 Reviews
42,90 
Mill/ Drill MICROMOT 60/EF The 60/EF with quick-action chuck. Practical for use with different shaft diameters. Slim, easily handled and light. Ideal for working steel, precious metals, glass, ceramics, plastics and precious stones.

Mill/drill system BFW 40/E

Mill/drill system BFW 40/E, with controller for speeds of 900 – 6,000rpm.

Characteristics:

  • The triple ball bearing armature provides direct drive (no gearing).
  • Die-cast aluminium head with spindle neck of 43mm (European standard).
  • Large, easy to use switch with emergency function. Chart indicates optimum speeds for milling and drilling of various materials.
  • The motor operates at 40V, supplied from the power pack/ controller. At this level, the control characteristics are ideal and yield high torque, even at lower speeds. (The compound table, drill stand and step clamps are not included.)
Categories:

Mill/drill system BFW 40/E

Quick View
0 Reviews

Mill/drill system BFW 40/E

Mill/drill system BFW 40/E, with controller for speeds of 900 - 6,000rpm.

Characteristics:

  • The triple ball bearing armature provides direct drive (no gearing).
  • Die-cast aluminium head with spindle neck of 43mm (European standard).
  • Large, easy to use switch with emergency function. Chart indicates optimum speeds for milling and drilling of various materials.
  • The motor operates at 40V, supplied from the power pack/ controller. At this level, the control characteristics are ideal and yield high torque, even at lower speeds. (The compound table, drill stand and step clamps are not included.)

Mill/drill unit BFB 2000

For standard drills with 43mm spindle neck.

Characteristics:

  • Head tilts through 90°, thus offering a multitude of capabilities: Diagonal drilling, versatile milling without need of special milling bits, milling of diagonal slots.
  • Fine feed selectable allowing fine head feed for milling. With dial and depth scale.
  • Geared rack and pinion feed for effortless drilling.
  • 45mm diameter drill column, 500mm long. Approx. 140mm throat (column outside to tool centre). 65mm stroke.
  • Plane-milled, solid base plate approx. 200 x 200mm with two continuous MICROMOT standard T-slots (12 x 6 x 5mm).
  • Easy clamping of all common drills with standard 43mm spindle collar.
  • Weight approx. 6.5kg.
Categories:

Mill/drill unit BFB 2000

Quick View
0 Reviews

Mill/drill unit BFB 2000

For standard drills with 43mm spindle neck.

Characteristics:

  • Head tilts through 90°, thus offering a multitude of capabilities: Diagonal drilling, versatile milling without need of special milling bits, milling of diagonal slots.
  • Fine feed selectable allowing fine head feed for milling. With dial and depth scale.
  • Geared rack and pinion feed for effortless drilling.
  • 45mm diameter drill column, 500mm long. Approx. 140mm throat (column outside to tool centre). 65mm stroke.
  • Plane-milled, solid base plate approx. 200 x 200mm with two continuous MICROMOT standard T-slots (12 x 6 x 5mm).
  • Easy clamping of all common drills with standard 43mm spindle collar.
  • Weight approx. 6.5kg.

Miller FF 500/BL

With variable speed pre-selection from 200 – 4,000rpm and high precision (accuracy 0.05mm). With digital speed indication.

Characteristics:

  • The sophisticated control via rotor position and speed sensors guarantees high torque for use of large milling cutters in the lower speed range.
  • Solid column with dovetail guides. Milling head can be rotated to the left and right by 90° (with graduation).
  • The clampable spindle sleeve is prepared for mounting of the fine feed adapter.
  • Tool holder using multiple range collets type ER 20: One each of 6 – 8 – 10 and 12mm are included.
  • Height adjustment of milling head via hand wheel.
  • Solid plane-milled steel compound table with 3 continuous MICROMOT standard T-slots (12 x 6 x 5mm).
  • All 3 hand wheels with graduated scale ring (1 rev. = 2mm).
Categories:

Miller FF 500/BL

Quick View
0 Reviews

Miller FF 500/BL

With variable speed pre-selection from 200 - 4,000rpm and high precision (accuracy 0.05mm). With digital speed indication.

Characteristics:

  • The sophisticated control via rotor position and speed sensors guarantees high torque for use of large milling cutters in the lower speed range.
  • Solid column with dovetail guides. Milling head can be rotated to the left and right by 90° (with graduation).
  • The clampable spindle sleeve is prepared for mounting of the fine feed adapter.
  • Tool holder using multiple range collets type ER 20: One each of 6 - 8 - 10 and 12mm are included.
  • Height adjustment of milling head via hand wheel.
  • Solid plane-milled steel compound table with 3 continuous MICROMOT standard T-slots (12 x 6 x 5mm).
  • All 3 hand wheels with graduated scale ring (1 rev. = 2mm).

Miller FF 500/BL CNC-Ready

With recirculating ball spindles and powerful step motors at all 3 axes.

Interesting for users who already own a control unit or would like to purchase one from another provider on the market.

Three standard plugs (SUB-D 9POLE) are available to connect the control unit. The mechanical construction of the miller is identical to the miller FF 500/BL-CNC.

Categories:

Miller FF 500/BL CNC-Ready

Quick View
0 Reviews

Miller FF 500/BL CNC-Ready

With recirculating ball spindles and powerful step motors at all 3 axes.

Interesting for users who already own a control unit or would like to purchase one from another provider on the market.

Three standard plugs (SUB-D 9POLE) are available to connect the control unit. The mechanical construction of the miller is identical to the miller FF 500/BL-CNC.

Miller FF 500/BL-CNC

Characteristics:

  • With brushless direct drive: Quiet and vibration-free with high precision (accuracy 0.05mm).
  • Variable speed pre-selection from 200 – 4,000rpm with digit speed display.
  • With double roller bearing recirculating ball spindles at all 3 axes and 3 powerful step motors for driving compound table and milling head.
  • Large travel distances: X-axis: approx. 290mm, Y-axis: approx. 100mm, Z-axis: approx. 200mm.
  • Stable column with dovetail slideway.
  • Including user-friendly software. Runs under WINDOWS® (see description below).
  • Thanks to CNC control of 3 tool axes machining of steel and non-ferrous metals is possible in all dimensions. This also applies to larger work pieces!
  • Axes drive with recirculating ball spindles (no backlash) and powerful step motors.
  • Otherwise the mechanical design is almost identical to the miller FF 500/BL: Solid, flat-milled compound table in steel with 3 continuous T-slots for size 8 standard T-nuts. Base of vibration-damping cast steel. Stable column with dovetail slideway. Milling head can be pivoted to the left and right by 90°, with powerful, quiet and shock-free running condenser motor.
  • Poly V-belt drive for 6 spindle speeds (180 – 2,500/min).
  • Additional sleeve feed (30mm) using drilling lever with scale ring (1 graduation line = 1mm). Work piece fixing using steel collets.
  • Complete with CNC control unit, CNC programme software, all connecting cables, one each multiple range standard type ER 20 collets 6 – 8 – 10 and 12mm and detailed manual.
Categories:

Miller FF 500/BL-CNC

Quick View
0 Reviews

Miller FF 500/BL-CNC

Characteristics:

  • With brushless direct drive: Quiet and vibration-free with high precision (accuracy 0.05mm).
  • Variable speed pre-selection from 200 - 4,000rpm with digit speed display.
  • With double roller bearing recirculating ball spindles at all 3 axes and 3 powerful step motors for driving compound table and milling head.
  • Large travel distances: X-axis: approx. 290mm, Y-axis: approx. 100mm, Z-axis: approx. 200mm.
  • Stable column with dovetail slideway.
  • Including user-friendly software. Runs under WINDOWS® (see description below).
  • Thanks to CNC control of 3 tool axes machining of steel and non-ferrous metals is possible in all dimensions. This also applies to larger work pieces!
  • Axes drive with recirculating ball spindles (no backlash) and powerful step motors.
  • Otherwise the mechanical design is almost identical to the miller FF 500/BL: Solid, flat-milled compound table in steel with 3 continuous T-slots for size 8 standard T-nuts. Base of vibration-damping cast steel. Stable column with dovetail slideway. Milling head can be pivoted to the left and right by 90°, with powerful, quiet and shock-free running condenser motor.
  • Poly V-belt drive for 6 spindle speeds (180 - 2,500/min).
  • Additional sleeve feed (30mm) using drilling lever with scale ring (1 graduation line = 1mm). Work piece fixing using steel collets.
  • Complete with CNC control unit, CNC programme software, all connecting cables, one each multiple range standard type ER 20 collets 6 - 8 - 10 and 12mm and detailed manual.

Tungsten carbide milling drill bits (spear drill bits)

For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.

Diameter: 1mm
Useful Length: 6mm

Milling Bit Tungsten Carbide 1mm x 6mm

Quick View
0 Reviews
9,81 

Tungsten carbide milling drill bits (spear drill bits)

For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.

Diameter: 1mm
Useful Length: 6mm

Tungsten carbide milling drill bits (spear drill bits)

For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.

Diameter: 2mm
Useful Length: 8mm

Milling Bit Tungsten Carbide 2mm x 8mm

Quick View
0 Reviews
9,50 

Tungsten carbide milling drill bits (spear drill bits)

For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.

Diameter: 2mm
Useful Length: 8mm

Tungsten carbide milling drill bits (spear drill bits)

For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.

Diameter: 3mm
Useful Length: 12mm

Milling Bit Tungsten Carbide 3mm x 12mm

Quick View
0 Reviews
10,00 

Tungsten carbide milling drill bits (spear drill bits)

For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.

Diameter: 3mm
Useful Length: 12mm

Tungsten carbide milling drill bits (spear drill bits)

For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.

Diameter: 5mm

Milling Bit Tungsten Carbide 5mm

Quick View
0 Reviews
18,20 

Tungsten carbide milling drill bits (spear drill bits)

For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.

Diameter: 5mm

Tungsten carbide milling drill bits (spear drill bits)

For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.

Milling Bits Tungsten Carbide Set (3 Pieces)

Quick View
0 Reviews
11,85 

Tungsten carbide milling drill bits (spear drill bits)

For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft Ø 2.35mm.

Tungsten Carbide Milling Bits

Made of wear-resistant highly compressed fine-granular tungsten. Used for vibration-free milling of high accuracy dimensions. It is advisable to secure workpieces well, avoiding accidents. For milling steel, cast steel, non-ferrous metals, plastics and extremely hard materials. May be used for technical work, for engraving and milling of PC cards. Shafts Ø 3.0 or 2.35mm. Here also we recommend the use of MICROMOT Steel Collets

Milling Bits Tungsten Carbide Set 2,3mm

Quick View
0 Reviews
7,98 
Tungsten Carbide Milling Bits Made of wear-resistant highly compressed fine-granular tungsten. Used for vibration-free milling of high accuracy dimensions. It is advisable to secure workpieces well, avoiding accidents. For milling steel, cast steel, non-ferrous metals, plastics and extremely hard materials. May be used for technical work, for engraving and milling of PC cards. Shafts Ø 3.0 or 2.35mm. Here also we recommend the use of MICROMOT Steel Collets

Selected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling 

Set Includes: 1 x Ø5mm Triangle Milling Bit , 1 x Ø5mm Sphere Milling Bit, 1 x  Ø5mm Flat Milling Bit

Note: Recommended to be used with MICROMOT Steel Collets

Milling Bits Wolfram Vanadium Set (3 Pieces)

Quick View
0 Reviews
6,81 

Selected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling 

Set Includes: 1 x Ø5mm Triangle Milling Bit , 1 x Ø5mm Sphere Milling Bit, 1 x  Ø5mm Flat Milling Bit

Note: Recommended to be used with MICROMOT Steel Collets

Selected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling 

Recomended to be used with MICROMOT Steel Collets

Milling Bits Wolfram Vanadium Set (5 Pieces)

Quick View
0 Reviews

Selected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling 

Recomended to be used with MICROMOT Steel Collets

Selected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling 

Diameter: 10mm

Recomended to be used with MICROMOT Steel Collets

Milling Bits Wolfram Vanadium Set 10mm

Quick View
0 Reviews
12,90 

Selected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling 

Diameter: 10mm

Recomended to be used with MICROMOT Steel Collets

Selected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling 

Diameter: 3mm

Recomended to be used with MICROMOT Steel Collets

Milling Bits Wolfram Vanadium Set 3mm

Quick View
0 Reviews
5,50 

Selected wolfram vanadium steel. Purpose-made stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. Ideal for freehand precision work. For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris. All shafts Ø 2.35 or 3.0mm. Ideal for milling, routing, shaping, profiling 

Diameter: 3mm

Recomended to be used with MICROMOT Steel Collets

Back to Top
X
Product has been added to your cart