Fence Plastic Square Green 0.5cm x Height 1m
Fence Plastic Square Green 0.5cm x Height 1m
Quick ViewFencing mesh Galvanised 2″ x 2″ x 1.2 m ( Roll 23m)
Fencing mesh Galvanised 2" x 2" x 1.20 m (Roll 23m)
Quick ViewFencing mesh Galvanised 2″ x 2″ x 1.5m (Roll 23m)
Fencing mesh Galvanised 2" x 2" x 1.50m (Roll 23m)
Quick ViewFencing mesh Galvanised 2″ x 2″ x 1.8m (Roll 23m)
Fencing mesh Galvanised 2" x 2" x 1.80m (Roll 23m)
Quick ViewFencing mesh Galvanised 3″ x 3″ x 1.5 ( Roll 23m)
Fencing mesh Galvanised 3" x 3" x 1.50 (Roll 23m)
Quick ViewFencing mesh Galvanised PVC 2″ x 2″ 1.2m (Roll 20m)
Fencing mesh Galvanised PVC 2" x 2" 1.20m (Roll 20m)
Quick ViewFencing mesh Galvanised PVC 2″ x 2″ 1.5m(Roll 20m)
Fencing mesh Galvanised PVC 2" x 2" 1.50m (Roll 20m)
Quick ViewFencing mesh Galvanised PVC 2″ x 2″ 1.8m (Roll 20m)
Fencing mesh Galvanised PVC 2" x 2" 1.80m (Roll 20m)
Quick ViewFencing Pole Galvanised 5ft. (150cm)
Fencing Pole Galvanised 5ft. (150cm)
Quick ViewFencing Pole Galvanised 6ft. (180cm)
Fencing Pole Galvanised 6ft. (180cm)
Quick ViewFencing Pole Galvanised 7ft. (210cm)
Fencing Pole Galvanised 7ft. (210cm)
Quick ViewFencing Pole Galvanised 8ft. (240cm)
Fencing Pole Galvanised 8ft. (240cm)
Quick ViewFencing Pole Steel 5ft. (150cm)
Fencing Pole Steel 5ft. (150cm)
Quick ViewFencing Pole Steel 6ft. (180cm)
Fencing Pole Steel 6ft. (180cm)
Quick ViewFencing Pole Steel 7ft. (210cm)
Fencing Pole Steel 7ft. (210cm)
Quick ViewDiamond coated
Ø 85 x 0.7 x 10mm. Layer ‘D100’. Ceramics, porcelain, tiles, stone, CFK, CRP and epoxy circuit boards.
FET Saw Blades Diamond Coated
Quick ViewDiamond coated
Ø 85 x 0.7 x 10mm. Layer 'D100'. Ceramics, porcelain, tiles, stone, CFK, CRP and epoxy circuit boards.
High-alloy special steel (HSS)
Ø 80 x 1.1 x 10mm, 250 teeth. Use on non-ferrous metals, soft and hard woods, laminates, GRP, CFK and composite boards.
FET Saw Blades HSS
Quick ViewHigh-alloy special steel (HSS)
Ø 80 x 1.1 x 10mm, 250 teeth. Use on non-ferrous metals, soft and hard woods, laminates, GRP, CFK and composite boards.
Milling Cutting Set (2mm-5mm)
All cutters with 6mm shaft. Cutters of Ø 2 – 3 – 4 and 5mm. Double fluted according to DIN 327. Made of HSS-Co5. Comes in wooden box with sliding lid.
FF 230 and FF 500/BL Milling Cutting Set (2mm-5mm)
Quick ViewMilling Cutting Set (2mm-5mm)
All cutters with 6mm shaft. Cutters of Ø 2 - 3 - 4 and 5mm. Double fluted according to DIN 327. Made of HSS-Co5. Comes in wooden box with sliding lid.
Milling Cutting Set (6mm-10mm)
4 cutters Ø 6 – 7 – 8 and 10mm. Four flute design according to DIN 844. Shafts 6 and 10mm respectively. Made of HSS-Co5. Supplied in wooden box with sliding lid.
FF 230 and FF 500/BL Milling Cutting Set (6mm-10mm)
Quick ViewMilling Cutting Set (6mm-10mm)
4 cutters Ø 6 - 7 - 8 and 10mm. Four flute design according to DIN 844. Shafts 6 and 10mm respectively. Made of HSS-Co5. Supplied in wooden box with sliding lid.
Three Piece Set Centre Drill Set
Made of HSS steel. DIN 333 (type A) 60°. Complete set centre drills with sizes of 2 – 2.5 and 3.15mm.
FF 230 and FF 500/BL Three Piece Set Centre Drill Set
Quick ViewThree Piece Set Centre Drill Set
Made of HSS steel. DIN 333 (type A) 60°. Complete set centre drills with sizes of 2 - 2.5 and 3.15mm.
Five piece collet set (not depicted)
Includes 1 each of 2.4 – 3 – 3.2 – 4 and 5mm, for milling cutters. Supplied in a wooden box with sliding lid.
FF 230 and PF 230 Collet Set
Quick ViewFive piece collet set (not depicted)
Includes 1 each of 2.4 - 3 - 3.2 - 4 and 5mm, for milling cutters. Supplied in a wooden box with sliding lid.
Compound Table KT 230
As described at MICRO miller FF 230, but excluding headstock and column. With 34mm bore to mount the PF 230 mill/drill head (the end fitting of the mill head’s 35mm column is machined to 34mm).
FF 230 Compound Table KT 230
Quick ViewFine feed for MICRO miller FF 230
Easily installed in a few seconds. The feed may be used via either the height feed (vertical) or the fine feed in the tilted position. The graduated scale may be zero reset. One revolution is equivalent to 1.5mm spindle travel (1 division = 0.05mm).
FF 230 Fine Feed
Quick ViewFine feed for MICRO miller FF 230
Easily installed in a few seconds. The feed may be used via either the height feed (vertical) or the fine feed in the tilted position. The graduated scale may be zero reset. One revolution is equivalent to 1.5mm spindle travel (1 division = 0.05mm).
FF 400 Splash guard and chip collecting tray
Made of 1.5mm thick sheet steel, powder-coated. Secure stand due to drill holes for fastening to a work surface (the use of steel sleeves keeps the tray tightly sealed). L 700mm, W 420mm, H 40mm.
FF 230, FF 400, FF 500, FF 500/CNC, FF 500 – ready for CNC, FF 500/BL, FF 500/BL-CNC and FF 500/BL-CNC-ready as well as for mill/drill unit BFB 2000 and compound table KT 150.
FF 400 Splash guard and chip collecting tray
Quick ViewFF 400 Splash guard and chip collecting tray
Made of 1.5mm thick sheet steel, powder-coated. Secure stand due to drill holes for fastening to a work surface (the use of steel sleeves keeps the tray tightly sealed). L 700mm, W 420mm, H 40mm.
FF 230, FF 400, FF 500, FF 500/CNC, FF 500 - ready for CNC, FF 500/BL, FF 500/BL-CNC and FF 500/BL-CNC-ready as well as for mill/drill unit BFB 2000 and compound table KT 150.
FF 500 and FF 500/BL-CNC Universal dividing table UT 400
For accurate machining of circular work pieces. The table may be fixed horizontally or vertically. Worm drive for division through 360° allowing for almost all possible divisions below 100. Supplied with 4 index plates: 27/42, 33/40, 34/39 and 36/38. Used to manufacture sprockets, gearboxes and drives, ratchets, cams, etc. (the faceplate is not included). The taper is identical to the main spindle of the lathe. With matching nuts and screws for fixation in MICROMOT standard T-slots (12 x 6 x 5mm). Supplied in a wooden box with sliding lid.
FF 500 and FF 500/BL-CNC Universal dividing table UT 400
Quick ViewFF 500 and FF 500/BL-CNC Universal dividing table UT 400
For accurate machining of circular work pieces. The table may be fixed horizontally or vertically. Worm drive for division through 360° allowing for almost all possible divisions below 100. Supplied with 4 index plates: 27/42, 33/40, 34/39 and 36/38. Used to manufacture sprockets, gearboxes and drives, ratchets, cams, etc. (the faceplate is not included). The taper is identical to the main spindle of the lathe. With matching nuts and screws for fixation in MICROMOT standard T-slots (12 x 6 x 5mm). Supplied in a wooden box with sliding lid.
FF 500/BL and FF 400 Automatic Universal Axial Feed
For the X axis of the Miller FF 500/BL. Will also fit the predecessor compound table KT 400 and the Miller FF 400. Simple assembly: The unit is mounted to the compound table with two bolts and automatically drives the spindle of the X-axis. For manual operation the handwheel needs to be mounted on the spindle of the drive-axis. Balanced special DC motor with electronic speed control (full-wave electronics). Manual drive with freewheeling function and two speed levels: Stage 1 for common machining (20 – 75mm/min). Stage 2: for machining at higher speed or quick adjustment of the X axis (90 – 260mm/min). Freewheeling function for manual operation by handwheel.
FF 500/BL and FF 400 Automatic Universal Axial Feed
Quick ViewFF 500/BL and FF 400 Automatic Universal Axial Feed
For the X axis of the Miller FF 500/BL. Will also fit the predecessor compound table KT 400 and the Miller FF 400. Simple assembly: The unit is mounted to the compound table with two bolts and automatically drives the spindle of the X-axis. For manual operation the handwheel needs to be mounted on the spindle of the drive-axis. Balanced special DC motor with electronic speed control (full-wave electronics). Manual drive with freewheeling function and two speed levels: Stage 1 for common machining (20 - 75mm/min). Stage 2: for machining at higher speed or quick adjustment of the X axis (90 – 260mm/min). Freewheeling function for manual operation by handwheel.FF 500/BL and FF 500/BL-CNC. MICROMOT adapter
The standard milling head is exchanged for the adapter in just a few steps. Our 20mm collar enables to fasten all appliances of the MICROMOT 60 series, the MICROMOT precision drill/grinder FBS 240/E and the MICROMOT professional drill/grinder IBS/E. Especially for applications that require high speeds for small milling cutters (e.g. milling electronic boards), but also for micro drilling. Complete with fastening screws.
The professional drill/grinder IBS/E depicted here is not included.
FF 500/BL and FF 500/BL-CNC MICROMOT adapter
Quick ViewFF 500/BL and FF 500/BL-CNC. MICROMOT adapter
The standard milling head is exchanged for the adapter in just a few steps. Our 20mm collar enables to fasten all appliances of the MICROMOT 60 series, the MICROMOT precision drill/grinder FBS 240/E and the MICROMOT professional drill/grinder IBS/E. Especially for applications that require high speeds for small milling cutters (e.g. milling electronic boards), but also for micro drilling. Complete with fastening screws.
The professional drill/grinder IBS/E depicted here is not included.
FF 500/BL Digital Position Indicator
With large multi-function display, 3 glass rulers (with one sensor each) and fastening elements.
Reasonable for repetitive machining: A second start point in addition to the zero point can be set anywhere. Most important computing functions:
– Calculation and indication of a centre position
– Basic arithmetic operations
– Positioning of drill holes on any straight lines and circular paths
– Milling of crooked planes
– Milling of radii in different planes
FF 500/BL Digital Position Indicator DA 3.1
Quick ViewFF 500/BL Digital Position Indicator
With large multi-function display, 3 glass rulers (with one sensor each) and fastening elements.Reasonable for repetitive machining: A second start point in addition to the zero point can be set anywhere. Most important computing functions: - Calculation and indication of a centre position - Basic arithmetic operations - Positioning of drill holes on any straight lines and circular paths - Milling of crooked planes - Milling of radii in different planes
FF 500/BL Fine Feed
Quick and easy to install. The clutch system enables feed via either the drill handle or the handwheel. The handwheel has 0.025 graduations and may be set to zero. 1 division = 0.05mm.
FF 500/BL Fine Feed
Quick ViewFF 500/BL Fine Feed
Quick and easy to install. The clutch system enables feed via either the drill handle or the handwheel. The handwheel has 0.025 graduations and may be set to zero. 1 division = 0.05mm.
Matt fiberglass. It is used with polyester resin to create thickness of objects.
Fibre Glass Mat Motip
Quick View2-component putty with special filters. Used on steel, aluminum, wood, concrete and polyester.
Fibre Glass Putty Motip 1000gr
Quick View2-component putty with special filters. Used on steel, aluminum, wood, concrete and polyester.
Fibre Glass Putty Motip 500gr
Quick ViewRasp for metal, square 200mm
File Beorol Square 200mm
Quick ViewRasp for metal, triangular 200mm
File Beorol Triangular 200mm
Quick View- High carbon steel, hardened, and tempered.
- Soft grip handles with a hang hole for convenience.
- Improved tooth profile for enhanced performance
File Draper Flat 200mm
Quick View- High carbon steel, hardened, and tempered.
- Soft grip handles with a hang hole for convenience.
- Improved tooth profile for enhanced performance
- High carbon steel, hardened, and tempered.
- Soft grip handles with a hang hole for convenience.
- Improved tooth profile for enhanced performance
File Draper Flat 200mm
Quick View- High carbon steel, hardened, and tempered.
- Soft grip handles with a hang hole for convenience.
- Improved tooth profile for enhanced performance
- Carbon chrome steel hardened and tempered with rust preventative finish and dipped in rust preventative oil.
File Draper Flat 6 x 300mm
Quick View- Carbon chrome steel hardened and tempered with rust preventative finish and dipped in rust preventative oil.
- High carbon steel, hardened, and tempered.
- Soft grip handles with a hang hole for convenience.
- Improved tooth profile for enhanced performance
File Draper Half Round 200mm
Quick View- High carbon steel, hardened, and tempered.
- Soft grip handles with a hang hole for convenience.
- Improved tooth profile for enhanced performance
- High carbon steel, hardened, and tempered.
- Soft grip handles with a hang hole for convenience.
- Improved tooth profile for enhanced performance
File Draper Round 200mm
Quick View- High carbon steel, hardened, and tempered.
- Soft grip handles with a hang hole for convenience.
- Improved tooth profile for enhanced performance
File Erizo for Chains 8 x 4.8mm 3/16